SKU: 45003443537

Eberlestock Modframe - Dry Earth

Sale price$170.55 Regular price$189.50
Save 10%

Pay in installments of $47.38 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 15 - Jul 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Eberlestock Modframe - Dry EarthEberlestock Modframe Dry Earth Der Eberlestock ModFrame ist das neue Herzstck fr modulare Jagd und Outdoor Rucksacksysteme. Als Weiterentwicklung des bekannten Mainframe konzipiert, setzt er neue Mastbe bei Passform, Lastmanagement und Vielseitigkeit. Der leichte, dennoch robuste Aluminium Polycarbonat Rahmen mit integriertem Load Panel (Meat Shelf) verlagert schwere Lasten nher an die Krpermitte so bleibt dein Schwerpunkt optimal und die Ermdung


Eberlestock Modframe - Dry Earth

Der Eberlestock ModFrame™ ist das neue Herzstück für modulare Jagd- und Outdoor-Rucksacksysteme. Als Weiterentwicklung des bekannten Mainframe™ konzipiert, setzt er neue Maßstäbe bei Passform, Lastmanagement und Vielseitigkeit. Der leichte, dennoch robuste Aluminium-Polycarbonat-Rahmen mit integriertem Load-Panel (Meat-Shelf) verlagert schwere Lasten näher an die Körpermitte – so bleibt dein Schwerpunkt optimal und die Ermüdung deutlich reduziert. Mit einem vollständig anpassbaren Tragesystem – inklusive verstellbarer Rückenlänge, sehr gepolsterten Schultergurten und Hüftgurt – bietet der ModFrame™ Komfort auch bei langen Expeditionen unter extremen Bedingungen. Er ist vollständig kompatibel mit dem Hunt EMOD™-System und passt sowohl zu kleineren Packs wie dem Brooks 3500 als auch zu großen Expeditionstaschen wie dem Brooks 7000. Der ideale Stapel für jeden, der das Maximum aus Ausdauer, Stabilität und Modularität herausholen will.

Eigenschaften:

Material & Konstruktion:

  • Robuste Außenhülle aus 1000D und 500D Ripstop-Nylon 

  • Leichter Aluminium-Polycarbonat-Rahmen, flexibles Design für Bewegungsfreiheit bei gleichzeitig hoher Stabilität 

Integriertes Load-Panel (Meat Shelf)

  • Niedrigprofil-Lastenpanel ersetzt klassische L-Frame-Regale, hält Last eng am Rücken 

  • Dual 20 mm Gurte zur sicheren Fixierung schwerer Lasten

  • Höhenverstellbare Ober- und Unterpunkte für größere Ladung

  • Kompressionsriemen fixieren Last und minimieren Bewegung

  • Mesh-Kanal für verbesserte Luftzirkulation während langer Pack-Outs

Erweiterte Trageanpassung & Komfort

  • Torso-Verstellung mit unbegrenzter Höhenanpassung für perfekte Passform 

  • Mehr als 50 % mehr Polsterung an Schulter- und Hüftgurt im Vergleich zum Vorgängermodell 

  • Extra hohe Load-Lifter zur optimierten Gewichtsverteilung 

  • Dicker, verstellbarer Lendenpolster mit Silikon-Grip für sicheren Sitz 

  • Ein-Hand-Hüftgurtverstellung via Zugsystem 

  • Mikroeinstellriemen am Rücken zur Feinjustierung der Rahmenspannung 

Vielseitigkeit & Zubehör

  • Quick-Attach Schnellverschlüsse an den Seiten für individuelle Konfiguration 

  • Laser-cut MOLLE-Panel am Hüftgurt zur Erweiterung mit Zubehörpouches 

  • Kompressionsriemen mit Verriegelung für sichere Lastenfixierung 

  • A2LS Rifle Scabbard kompatibel 

  • EMOD™-Systemkompatibilität – funktioniert mit Brooks 3500, Vapor 2500/5000, Brooks 7000, EMOD Lid, Batwings u. v. m.

Technische Daten

  • Gewicht: nur 4 lb 8 oz (ca. 2 kg) – leichter als der ältere Mainframe bei mehr Funktionalität 

  • Abmessungen: ca. 26″ H × 10″ W (~66 × 25 cm) 

  • Produktgarantie: Lifetime Warranty – lebenslange Garantie

Der Eberlestock ModFrame™ ist eine ernstzunehmende Weiterentwicklung für ambitionierte Jäger und Outdoor-Enthusiasten, die maximale Mobilität mit höchster Lastkontrolle und Anpassbarkeit kombinieren wollen. Er überzeugt durch sein durchdachtes Design, exzellenten Tragekomfort – selbst unter extremer Last – sowie der herausragenden Kompatibilität mit dem gesamten EMOD™-System. Wer ein zuverlässiges Fundament für modulare Rucksack-Systeme sucht, findet im ModFrame™ ein langlebiges, ergonomisches und äußerst vielseitiges Kernstück für jede Mission.
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 45003443537

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.4 ★★★★★
Based on 7 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
C
Fort Morgan, US
★★★★★ 5
Delightful little device now that I've had a practice run with it
Color: Silver
I just picked this up to make my own cappuccino and breve and I must say that I've fallen in love with the thing. My first use was a bit of a misfire owing to my inexperience with it, but the second time worked like a champ. The trick is to ensure that you have plenty of empty head space in the container to develop a good vortex and foam volume while still having a tall enough fluid column to keep the mixing head mostly submerged while generating the vortex. My first attempt involved using about half a cup of half and half in a small saucepan. I had more than enough head space, but I was only barely able to keep the mixing head (it comes with two: a single turn coil and a 3-turn coil of coil) submerged and that went poorly, leaving me with a bit of a mess to clean up on my rangetop as the lack of fluid column ended up slinging the fluid around and out of the saucepan. The second attempt went far better, as I transferred the barely-simmered half and half back into the Pyrex two-cup mixing cup in which i initially measured the 4 fl. oz. This time it worked beautifully. There was just enough unfoamed column height to keep the mixing head well covered prior to powering up and it just barely kept me sufficiently covered while powered up to maintain a very vigorous yet controlled vortex. This method also had the advantage of telling me exactly how much total foamed volume I had generated. The resulting breve had a wonderfully thick and frothy head in my mug and resulted in a delightfully topped beverage which, if anything, had a bit too much foam and a bit too little liquid. That's on me, however, since I wanted to get a feel for the device under better conditions to build my own experience; I'll just run the frother for less time next time. Cleanup of the device itself is quite easy: simply detach the mixing head and shaft from the motor base and rinse. I always hand-wash my dishes, so I'm not in a good position to speak to its machine wash compatibility, but I suspect that it would come out just fine, provided that care is taken not to bend the shaft or coil head out of shape. The device itself is small enough to fit in a purse and should travel quite nicely, though you'll need to commit to a single mixing head, which will almost certainly turn out to be the smaller one. It's really nice to be able to make cappuccino/breve at home any time I see fit now. It's going to make a well-loved addition to my kitchen.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 6, 2018
C
Verified Purchase
C. Day
Lexington, US
★★★★★ 4
Worked well, fast, then overheated. Contacted Vomelon and they were quick to help me replace unit.
Color: Silver
Update ***Vomelon customer service is great! I contacted them about my issue, they responded quickly and worked to resolve it. They're giving me a new one! Hope this one works out. I'm adding back a star for their service. Update 4/18/20 While making whipped Dalgona coffee today the unit slowed down the completely shut off. I pressed the power button again to restart and same thing, it starts at high speed then slows down and shuts off. I will be contacting seller. I’m taking away a star, can’t believe this is happening. First day using this frother with the batteries provided and the body became very hot. Used it for about 3 minutes and the heat became uncomfortable in my hands. Took out the AAA alkaline batteries “Nai Li Wang” brand made in China and replaced them with some Kirkland AAA that I had on hand. Problem solved! No overheating with the new batteries. Throwing away the China made batteries. Would’ve been 5 stars if it weren’t for the overheating. Other than that mishap, the frother was easy to use and pretty powerful. Whipped up my coffee with maple syrup (making Dalgona coffee) really quick. I like that it has a cover for storage. I don’t have much space so having a compact size with a cover is convenient, I can put it in a drawer or storage box without damage to the whisk. Update: Day 2 of use Body of unit became warm but not hot as with original batteries provided. I used new batteries. Had the unit on for 4-5 minutes to whip my dalgona coffee. Not sure if the unit is supposed to get warm? Is it normal? I will contact seller. Besides that, my coffee got whipped pretty quick. I want to upload a photo but seems that Amazon has taken away that function for me? I could upload photos for my previous reviews on other products.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2020
G
Verified Purchase
Guy E. Wolek
Lowell, US
★★★★★ 5
Great Little Frother.
Color: Silver, Color: Silver
I really like this this little frother. What I noticed first is that it comes with a cover for the frothing arm. That’s very practical if you travel with it. I have traveled with a frother before and I put it in a toothpaste box, not much protection there. I use this 2 to 4 times a day. I can come pretty close to creating a Starbucks flat white at home. That saves $$$. The next thing I really like is that I can remove the arm for cleaning. If the arm does not come off clean up is a bit tricky. How does it work? Great! It has one speed, Fast. The power button is on the base of the handle so I just had to adjust the way I hold the frother when I turn it on. One thing, make sure the froth head is all the way into the liquid when you start it, lol. This little machine whips up a thick froth fast. It comes with 2 frothing heads, a three spring version as well as a standard one spring. There is a lot of plastic, but it doesn’t look or feel cheap. Actually I think it helps keep the weight down. I travel some and I appreciate when things are light. Over all, this is really nice it’s light portable and works great. I highly recommend this product. I was given this product for review and I am so glad they choose to contact me. I have been frothing milk for my coffee for the last few years. This has now became my go to frother.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on July 12, 2019
J
Verified Purchase
JSS
Cuba, US
★★★★★ 5
Great Frother
Color: Silver
The best frother I’ve owned! Love that the whisk is removable for washing, the end is flat so it stands up on its own and it’s pretty powerful.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 20, 2026
T
Verified Purchase
Toga
Whiting, US
★★★★★ 1
Almost right but connector sucks
Color: Silver
I much prefer a frother with swappable batteries and always use rechargeable AAA's and never disposable one's. The power button is in a comfortable spot as opposed to everyone else's odd and very uncomfortable side placement. Placing the power button on the side make you have to twist your entire arm to have your thumb facing down to be able to press anything whereas this one is right on top and can hold it like a simple joystick with no twisting of my arm. However, these plastic attachment points crack waaay too easily. I've already bought 3 of these and this is the part that breaks on all of them. I have designed and printed new attachments but the installation of them can damage the motor if I'm not careful. The motor also looses torque after only a few months. The windings need to be improved. Even though I really hate the plastic attachment, the button on top and the ability for it to stand up on its own without some stupid fiddly stand are the ONLY reasons I come back to this design. The moment someone makes a fully metal attachment (like I've seen) a power button on top and self standing, I'll throw this one away. Updated April 2025: I am about to buy my 4th one since 2019. This is NOT an endorsement for it, I just haven't found anything design wise that's better. The motor in these are short lived and they give out with no warning. Ergonomically this design make more sense than a side mounted button or switch, but I'm still dropping a star for the fact I've had to buy 4 of these darn things in such a short time Update: Oct 2025 I just bought this replacement in April and this things motor is already dead. I'm done with this item/seller. Just an overly cheap product. Product no longer worthy of even 2 stars
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2024

recommand products