
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 7 - Jul 12
For Your Every Summer RSVP, with Code: SUMMER15
Description
Lenz 11100 - LS100 Schaltempfänger 4-fach mit RückmeldungLenz 11100 Schaltdecoder LS100, Abmessungen: 114 x 60 x 20 mm Schaltdecoder LS100 Auch beim Schalten von Magnetartikeln bietet Digital plus wesentlich mehr Komfort und Flexibilitt: Tastenpulte knnen entfallen, da die Ansteuerung ber Bedienbausteine wie Fahrregler oder Computersoftware erfolgt. Die Verdrahtung ist bersichtlicher, da die Leitungen nicht mehr ber die ganze Modellbahnanlage gefhrt werden mssen, sondern entsprechende Decoder in der
Lenz 11100 - Schaltdecoder LS100, Abmessungen: 114 x 60 x 20 mm Schaltdecoder LS100 Auch beim Schalten von Magnetartikeln bietet Digital plus wesentlich mehr Komfort und Flexibilität: Tastenpulte können entfallen, da die Ansteuerung über Bedienbausteine wie Fahrregler oder Computersoftware erfolgt. Die Verdrahtung ist übersichtlicher, da die Leitungen nicht mehr über die ganze Modellbahnanlage geführt werden müssen, sondern entsprechende Decoder in der Nachbarschaft des Zubehörs montiert und mit ihnen verkabelt werden. Die Schalt-Informationen werden über die selbe zweiadrige Leitung, die auch die Gleise versorgt, an die Schaltdecoder geschickt, die daraufhin die Antriebe von Weichen und /oder Signalen in Bewegung setzen oder Lampen und LEDs in Lichtsignalen ein- und ausschalten. An einen Schaltdecoder können mehrere Weichen angeschlossen werden, die einzelnen Ausgänge erhalten (wie die Lokempfänger) eigene Adressen. Die Eigenschaften der Ausgänge können, je nach Verwendung des Weichenantriebes oder Signals, getrennt voneinander angepasst werden: Die Dauer, die ein Ausgang nach dem Aktivieren eingeschaltet bleibt, ist einstellbar. Diese Eigenschaft ist besonders nützlich bei Verwendung motorischer Weichenantriebe. Eine weitere Möglichkeit ist das Einstellen auf Blinkbetrieb, wobei die Blinkfrequenz variiert werden kann. Für Warnkreuze an Bahnübergängen wird daher keine separate Elektronik benötigt.Achtung! Nicht geeignet für Kinder unter 14 Jahren.
Achtung! Für Kinder unter 3 Jahren nicht geeignet. Erstickungsgefahr, da kleine Teile verschluckt oder eingeatmet werden können.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 1047 reviews
Sort
Product Reviews
★★★★★ 5
They Fixed My Boat
Size: PP67-712 V1
My boat wouldn’t start, and the outdrive wouldn’t go up or down. So I bought three of these solenoids and replaced the starter and both trim motor solenoids/relays. Now it starts right up with no problems and the trim motor is working again also. I have a 2006 Stingray boat.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2022
★★★★★ 1
Poor quality
Size: PP67-712 V1
Poor quality. Replaced a starter solenoid on a mercruser 4.3. Right off install it would click but not make a connection to start motor. Confirmed this was the culprit by jumping the terminals. After testing multiple times found it worked a little less than half the time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 5
Ya Just Gotta Have One
Size: 7.2 Surround + 3 HDMI
This is a must-have for in-wall wiring of your surround. I chose this one because I installed a 7.2 system with gold-plated jacks and it worked out great. You can get almost any combination of HDMI, subs/surrounds that you need (5.1, 5.2, 7.1, 7.2 etc). Do your planning on location and wire-routing; get good quality speaker wire and HDMI (high-speed with Audio Return Channel); get the remod-style mounting bracket/box then cut your hole at the same height/level as your electrical outlets and preferably between the same studs as your TV's wire-box so your HDMIs just run straight up to the TV (remember to install the bracket BEFORE you run your wires). When connecting the wires to these terminals, it's best to have 10 to 12 inches of wire coming out of the wall because you need space for your hands to manipulate the wires and nuts on the terminals. If you have a basement with access to the floor below the mounting location, it's best to drill 4 half-inch holes straight up through the bottom plate of the wall and feed your wires up those holes. Tip: If your TV and Surround Receiver are fully compatible you really only need 1 HDMI port on the wall plate, because you can plug your devices into the receiver and just sent the A/V/data to the TV while the audio is returned over the same HDMI.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2016
★★★★★ 5
Made a wire nest look fairly neat.
Size: 7.1 Surround + HDMI
My only complaint is that it wasn't available in black as it's in a dark walled home theater. However, it's behind the receiver so it's not real visible. It worked as expected and definitely kept the wiring neater and allowed me to run it through the walls.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 1, 2024
★★★★★ 4
Good quality, not enough connections
Size: 7.1 Surround + HDMI
Good quality, I wish the sold the individual outlets because I had to buy multiple just to get 11.1 surround connections.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 13, 2025