Pay in installments of $275.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 15 - Aug 20
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Teac PE505B Fully Balanced Phono Amplifier - BlackTeac PE 505 Fully Balanced Phono Amplifier Black Phono equalizing amplifier with dual monaural and fully balanced input output circuit design. FEATURES Fully balanced circuit design From the head amplifier to the equalizing amplifier sections to the buffer amplifier section on the final output stage; the PE 505 employs a fully balanced circuit design throughout all stages that amplifies, equalizes, and maintains signal purity of even the most
Teac PE-505 Fully Balanced Phono Amplifier - Black
Phono equalizing amplifier
with dual monaural and fully-balanced input/output circuit design.
FEATURES
From the head amplifier to the equalizing amplifier sections to the buffer amplifier section on the final output stage; the PE-505 employs a fully-balanced circuit design throughout all stages that amplifies, equalizes, and maintains signal purity of even the most extremely faint audio signals picked up by a cartridge.
Even unbalanced signal on the conventional RCA input is converted to the differential processing mode right after the input terminals.
Absorbing errors on the balanced output, the differential output equalizing circuit delivers a more accurate audio signal. The differential output circuit that cross-multiplied the hot and cold outputs each other. As the result, both signals are equalized for a pure and natural audio signal delivery.
A newly developed NF-type equalizing amplifier achieves less than ±0.05dB of RIAA deviation.
(20Hz to 20kHz)
The PE-505 achieves 106dB on the RCA input*1, and 86dB on the XLR input*2, while the residual noise voltage reaches 10μV on the MM and 85μV on the MC*3 which are sophisticated.
*1 MM *2 MC *3 XLR input
As well as the modern RIAA curve, individual curves on monaural records from DECCA and COLUMBIA issued before the RIAA curve was defined in 1955 are also supported.
The PE-505 equips switchable load-capacity for MM cartridges and switchable load-resistance for MC cartridges. Furthermore, the load-resistance measuring function allows users to select an appropriate load-resistance by pressing the MEASURE key on the front panel to show the total load-resistance value including cable resistance on the gauge.
Also, the Subsonic function shows subsonic signals less than 6Hz on the gauge, while the subsonic filter (17Hz, -24dB/octave) cuts unnecessary low frequency out of the hearing range.
With the quick demagnetize function, both magnetized iron cores of MC cartridges and the step-up transformer are demagnetized by playing back a vinyl record for as short as 30 seconds with the DEMAG position.
Features at a glance
- Full differential inputs/outputs circuits
- High-precision RIAA EQ circuit achieves less than 0.05dB of deviation
- Individual EQ curves for monaural records and ones with EQ from DECCA and COLUMBIA
- Balanced MC input
- Switchable MC impedance (10, 22, 47, 100, 220, 470, 1kΩ)
- Switchable MM load-impedance capacity (0, 100, 220, 330pF)
- MC load-impedance measurement function
- Switchable MM/MC gain (High/Low)
- Subsonic detection
- Subsonic filter (17Hz, –24dB/oct.)
- MONO function that mixes left and right channels as a monaural channel
- DEMAG function that de-magnetizes cartridge
- 3-position pin-point feet
- GND terminal
- RoHS compliant
SPECIFICATIONS
Spec description
| Amplifier section | |
| Total harmonic distortion | (Rated output, 1kHz, GAIN Low) |
| RCA input (MM) | 0.002% |
| RCA input (MC) | 0.02% |
| XLR input (MC) | 0.02% |
| Residual noise volt | (Input short, GAIN low, IHF-A) |
| RCA input (MM) | 10μV |
| RCA input (MC) | 65μV |
| XLR input (MC) | 85μV |
| S/N ratio | (Input short, Rated input, GAIN Low, IHF-A) |
| RCA input (MM) | 106dB |
| XLR input (MC) | 86dB |
| RIAA deviation (20Hz to 20kHz) | ±0.05dB |
| Channel separation | −90dB or higher (MM, 10kHz, GAIN Low) |
| Gain | |
| GAIN LOW | |
| RCA input (MM) | 34dB |
| RCA input (MC) | 54dB |
| XLR input (MC) | 54dB |
| GAIN HIGH | |
| RCA input (MM) | 46dB |
| RCA input (MC) | 66dB |
| XLR input (MC) | 66dB |
| Subsonic filter | 17Hz, –24dB/octave |
| Phono input section | |
| Unbalanced input | RCA Pin (MC/MM compatible) × 1 pair |
| Max input level | 150mV (MM, THD 0.1%, GAIN Low) 16mV (MC, THD 0.1%, GAIN Low) |
| Input impedance* | |
| MM | 47kΩ, Load-impedance: 0, 100, 220, 330pF |
| MC | 10, 22, 47, 100, 220, 470, 1kΩ |
| Balanced input | XLR (MC only) × 1 pair |
| Max input level | 16mV (MC, THD 0.1%, GAIN Low) |
| Input impedance* | |
| MC | 10, 22, 47, 100, 220, 470, 1kΩ * switchable from the Settings |
| Analog output section | |
| Unbalanced output | RCA pin × 1 pair |
| Rated output level | 2Vrms |
| Output impedance | 63Ω |
| Balanced output | XLR × 1 pair |
| Rated output level | 4Vrms |
| Output impedance | 126Ω |
| Power supply | |
| AC120V, 60Hz | |
|
AC220 - 240V, 50/60Hz |
|
| Power consumption | 14W |
| Overall dimensions(W × H × D) | 290 × 84.5 × 252.5 mm / 11.4" × 3.3" × 9.9" |
| Weight | 4.5kg / 10.0 lbs. |
| Included accessories | Power cord × 1, Cushions for foot × 3, Owner’s manual × 1 |
* RoHS complied.
* Spec and design are subject to change without notice.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy