XGecu T76 Programmer: Replaces T56, new RISC-V powered programmer

XGecu T76 Programmer: Replaces T56, new RISC-V powered programmerThe XGecu T76 builds upon the successful T56 and T48 series offering a host of upgrades. With a 48 pin ZIF socket and a 26 pin IO connector the T76 can handle chips with ease. It integrates high performance thanks to it's new 32 bit RISC V MCU + FPGA architecture, wide compatibility, and user friendly design, making it the ideal choice for electronic engineers, repair technicians, and DIY enthusiasts. This programmer adopts a USB 3. 0 Type C

The XGecu T76 builds upon the successful T56 and T48 series offering a host of upgrades. With a 48 pin ZIF socket and a 26 pin IO connector the T76 can handle chips with ease. It integrates high performance thanks to it's new 32-bit RISC-V MCU + FPGA architecture, wide compatibility, and user-friendly design, making it the ideal choice for electronic engineers, repair technicians, and DIY enthusiasts. This programmer adopts a USB 3.0 Type-C interface, boasting ultra-fast data transfer capabilities and outstanding stability, saving you valuable time and effort.

Key Features:

• Ultra-Strong Chip Compatibility: The T76 not only supports common EEPROM, EPROM, and FLASH chips on the market but also features robust microcontroller and programmable logic device (GAL/CPLD) support, with the capability to customize and add new chip models. Whether you're dealing with serial, parallel ROM, SPI NAND, or even EMMC/EMCP chips, the T76 handles them with ease.
  
  • Supports 26, 27, 28, 29, 37, 39, 49, 50 series parallel ROM, EPROM, EEPROM
  • Supports 24, 25, 35, 45, 85, 93, 95 series serial EEPROM
  • Supports P-NAND FLASH, customizable to add new chip models
  • Supports SPI NAND (SD NAND/SD cards)
  • Supports EMMC/EMCP
  • Supports microcontroller series programming
  • Supports GAL/CPLD programmable logic device programming
  • Supports VGA tool and VGA ISP programming
  • Supports SRAM chip testing
  • High-performance 54/74F/LS/HC CMOS4000 series IC logic test
  Note: The initial version of the software, features in BLUE have not been added, this will be completed in the subsequent software upgrades, the completion is estimated to be 2-3 months! (Expected date 2024.12.11)
• New Architecture, Double the Speed: The T76 features a high-performance 32-bit RISC-V MCU + FPGA controller, paired with a high-speed USB 3.0 Type-C interface. This configuration provides data transfer speeds up to 140MB/sec (EMMC 5.1 actual transfer rate), multiple times faster than traditional programmers! Whether you are reading or writing data, you will experience lightning-fast operation.
  • EMMC 5.1 actual transfer rate up to 140MB/sec (8.4GB/minute)
  • SPI NAND read speed up to 18MB/s
  • 64 Gb P-NAND read speed of 30MB/S
• Superior Performance, Stable and Reliable: The T76 employs a high-density board design and comes with a high-quality USB 3.0 aluminium grey braided cable, ensuring stable and reliable signal transmission. In addition, the T76 offers comprehensive power protection mechanisms, including over-voltage, over-current, reverse connection protection, and low-voltage warnings, allowing you to program with peace of mind, worry-free.
  • 30% more internal components than T56, with a higher density board design
  • Adopts a high-quality USB 3.0 Type-C aluminium grey braided cable for stable and reliable signal transmission
  • VCC voltage adjustable from 1.2V to 6.5V (64-level adjustable), and VPP voltage adjustable from 6.5V to 25V (64-level adjustable)
  • IO communication signal voltage adjustable from 1.2V to 3.6V (64-level adjustable)
  • VCC current limit adjustable from 120mA to 450mA, VPP current limit at 150mA, both with overcurrent protection
  • Supports 5V <1A power supply, with a static power consumption of just 150mA (tested in standby mode)
  • Offers comprehensive external power multi-protection, including over-voltage, reverse connection, over-current, and low-voltage tips
• Innovative Design, Convenient Operation: The T76 has 76 external IO pins, 48 of which are full-function IO pins and 28 of which are dedicated IO pins. These IO pins simultaneously support high-speed/high-voltage/high-current applications, giving you more flexibility to connect and program various chips. More importantly, thanks to its innovative design, the adapter requirements for the T76 are greatly reduced. One adapter can theoretically support chips with up to 68 pins (included) in the same package, greatly reducing adapter usage cost and complexity.
• Compact and Portable: Only 12mm x 7mm x 2.8mm, the T76 is lightweight and portable, allowing you to perform chip programming anytime, anywhere.
• No External Power Supply Required: No external power supply is required for all chip programming operations, making it simple and convenient.