Grado Prestige 3 Series Gold CartridgeGrado Prestige Gold3 Phono Cartridge Available at Vinyl Sound in Toronto, Canada, the Grado Prestige Gold3 is the flagship of Grado's renowned Prestige Series a moving iron phono cartridge hand assembled in Brooklyn, New York, by technicians with up to 25 years of experience. The Gold3 is not simply a production model: each unit is individually selected from the top 5% of Silver3 production runs that meet Grado's highest test specifications for output

Grado Prestige Gold3 Phono Cartridge

Available at Vinyl Sound in Toronto, Canada, the Grado Prestige Gold3 is the flagship of Grado's renowned Prestige Series — a moving iron phono cartridge hand-assembled in Brooklyn, New York, by technicians with up to 25 years of experience. The Gold3 is not simply a production model: each unit is individually selected from the top 5% of Silver3 production runs that meet Grado's highest test specifications for output balance, channel separation, and frequency response. The result is an exceptionally consistent, musical cartridge that delivers the warm, natural Grado sound with improved transparency and detail thanks to technology trickled down from the flagship Lineage Series.

OTL Technology — Optimized Transmission Line

At the heart of the Gold3 is Grado's proprietary OTL (Optimized Transmission Line) cantilever design — a four-piece assembly with a Grado-specific elliptical diamond stylus mounted on a brass bushing. OTL technology minimises resonance transfer between the stylus and generator, rejecting unwanted mechanical noise while preserving the fundamental and harmonic structure of the music. The result is a quieter background, a wider and deeper soundstage, and greater inner detail than comparable designs. Hi-Fi Choice's Alan Sircom summed it up: "The Prestige Gold seemed to be sweeter than most. It was lively and detailed but never edgy on vocal sibilants... Gold? Smooth? Mellow Yellow!"

Lineage Series Trickle-Down

The Prestige 3 Series benefits directly from Grado's flagship Lineage Series development. Ultra-high-purity copper coil winding techniques — perfected for the Epoch — are now applied to the Gold3's four coils, achieving electrical unison between them for precise channel balance and accurate stereo imaging. The Gold3's chassis also incorporates a de-stressing process derived from the Lineage Series, dissipating unwanted resonant energy so the musical signal travels unimpeded from groove to generator.

Key Features

• Hand-selected from the top 5% of Silver3 production runs — individually tested to higher specifications
• Moving Iron (MI) design with patented Flux-Bridger generator — one of the lowest effective moving-mass systems available
• Four-piece OTL cantilever with Grado-specific elliptical diamond stylus on brass bushing
• Machined turned generator for lower distortion and greater transparency
• Twin magnet system for optimised stereo channel balance
• Ultra-high-purity copper coil windings — trickle-down from the Lineage Series Epoch
• De-stressed chassis for resonance dissipation — trickle-down from Lineage Series development
• 5mV output — compatible with all standard MM phono stages
• Standard ½" mount (S/P) — fits virtually all tonearms and turntables
• Replaceable stylus (type U) — user-serviceable
• Hand-assembled in Brooklyn, New York, USA

Specifications

Frequently Asked Questions

What is the difference between the Grado Gold3 and Silver3?

The Gold3 and Silver3 share the same four-piece OTL cantilever, elliptical diamond stylus, and machined turned generator. The difference is selection: every Gold3 is individually hand-picked from Silver3 production runs — only approximately 5% of units pass Grado's higher test specifications for output consistency and channel balance and are designated Gold3.

Is the Grado Gold3 a moving magnet or moving iron cartridge?

The Gold3 is a moving iron (MI) cartridge, not a moving magnet (MM). It uses Grado's patented Flux-Bridger design, in which a magnetised iron element moves within a fixed coil assembly. Moving iron cartridges are compatible with all standard MM phono inputs (47kΩ) and typically offer lower moving mass than conventional MM designs.

What phono stage does the Grado Gold3 require?

The Gold3 outputs 5mV at 1kHz — identical to most MM cartridges — and requires a standard MM phono stage set to 47kΩ input loading. No special MC phono stage is needed. It is compatible with virtually all integrated amplifiers, receivers, and standalone phono preamps that include an MM input.

Is the stylus on the Grado Gold3 user-replaceable?

Yes. The Gold3 uses a user-replaceable stylus (type U). When the stylus wears out — typically after 500–1,000 hours of play — it can be swapped out without tools. Replacement styli are available through Vinyl Sound Toronto.

Is the Grado Gold3 compatible with high-mass tonearms?

The Gold3 has a high compliance of 20 CUs and a low weight of 5.5g, making it best suited to low-to-medium mass tonearms (effective mass of approximately 8–14g). It is not recommended for high-mass tonearms, where the resonance frequency may fall too low for optimal tracking.

Where can I buy the Grado Prestige Gold3 in Toronto, Canada?

The Grado Prestige Gold3 is available at Vinyl Sound in Toronto, Canada. Our team can advise on tonearm compatibility, phono stage matching, and stylus tracking force setup for your specific turntable system.