IE 3.0T HPFP Complete Pump Upgrade | Fits Audi S4/S5/A6/A7/SQ5/Q5 Supercharged Engines
SKU: 57739063691

IE 3.0T HPFP Complete Pump Upgrade | Fits Audi S4/S5/A6/A7/SQ5/Q5 Supercharged Engines

Sale price$661.95 Regular price$735.50
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 7 - Jul 12

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

IE 3.0T HPFP Complete Pump Upgrade | Fits Audi S4/S5/A6/A7/SQ5/Q5 Supercharged EnginesIE's HPFP complete pump upgrade for the Audi 3. 0TFSI Supercharged engines is a completely assembled bolt on high pressure fuel pump upgrade. The new OEM fuel pump housing is meticulously assembled with our USA engineered and manufactured high flow internals that will reliably provide enough fuel system pressure for dual pulley ECU tunes to provide enough flow for ethanol fuel blends. The 11. 67mm piston is the largest sized diameter possible within

IE's HPFP complete pump upgrade for the Audi 3.0TFSI Supercharged engines is a completely assembled bolt-on high-pressure fuel pump upgrade. The new OEM fuel pump housing is meticulously assembled with our USA-engineered and manufactured high-flow internals that will reliably provide enough fuel system pressure for dual pulley ECU tunes to provide enough flow for ethanol fuel blends. The 11.67mm piston is the largest sized diameter possible within the fuel-pump body.

DESIGNED & MACHINED
IN THE USA

IN-HOUSE PRECISION

COMPLETE
FULL PUMP

PRE-ASSEMBLED

HIGH-PRESSURE
DUAL PULLEY E40

FUELING SUPPORT


LEADING FEATURES

  • Complete fully assembled HPFP bolt-on ready upgrade
  • Higher pressure fuel upgrade for ethanol tunes
  • Reliably adds a larger fuel ceiling for increased power
  • Piston diameter increased to 11.67mm
  • Largest stroke volume availible
  • Broken-in and bench tested on in-house pump dyno
  • Constant diameter piston design for long-life operation
  • Retains OE spring to avoid increased camshaft wear
  • Tool steel DLC coated pin
  • Nitrided tool steel cylinder
  • Molybdenum disulphide impregnated leak-free seal
  • Stainless steel seal body
  • Buna-N rubber oil resistant o ring
  • Individually tested and verified for extreme tolerances
  • Engineered, designed, & manufactured in the USA

HIGH-VOLUME INTERNALS

Your HPFP provides extremely high fuel pressure (exceeding 1500psi) to the direct injection system on your Audi 3.0T supercharged engine. Fuel output and ultimately power is limited by the internal displacement of the pump. By increasing the bore and piston size of the pump internals, the HPFP upgrade is capable of producing much more flow. This higher-output HPFP design offers the fuel increase needed for those running Stage 2 Dual Pulley setups and looking to run higher octane fuels for aggressive race and track style driving.

PRECISION ASSEMBLY

The internal assembly of your HPFP is a delicate balance of astonishingly high pressure and extremely delicate tolerances. Every piston and cylinder is a match set CNC machined to exacting sizes. Tolerances between the two are hand-tested using precise measurement gauge tools and verified down to 0.00005 of an inch! These tolerances are required due to the maximized size of our pump assembly and absolutely critical for HPFP reliability and function. Even the smallest contamination can cause pump wear or failure, to ensure this each pump is assembled in a clean environment with a Laminar flow hood. This is why IE only sells HPFP pumps fully assembled in new OE housings as to ensure reliability.

Engineered & manufactured in the USA


INCLUDED LIMITED WARRANTY

The IE HPFP upgrade internals allow for the largest displacement available. To accomplish this, the assembly tolerances are incredibly tight and proper installation in a clean environment is absolutely critical. Due the required specialized equipment to assemble, test, and verify our IE HPFPs they are only sold as complete assembled units in new Audi OE housings. Due to this in-house assembly process, IE offers a Limited Warranty on the entire pump assembly:
Unlimited miles within 18 months from the original purchase date

CONSTANT DIAMETER PIN

The piston & cylinder engineered for HPFP upgrade is a constant diameter design; meaning it maintains the outer size through the entire piston shaft. This ensures no displacement change occurs on the bottom side of the piston and protects against pressurized pulses against the shaft seal. After testing many pump designs, IE engineers determined this feature necessary for long reliable pump operation. Be wary of pump designs with a stepped diameter engineered to use the factory seal as a cost saving design. We have found these units reduce the contact between the pin and cylinder by over 50% which greatly increases wear, pin leakage, and instability of the pin.

DLC COATED

DLC (diamond-like carbon coating) combines hardness and low friction, providing excellent wear properties and self-lubrication behavior that drastically extends the life of the tool steel piston.

NITRIDED CYLINDER

The cylinder can see up to 19000 strokes a minute and is lubricated by fuel only. Our tool steel cylinder is infused with nitrogen atoms into the atomic structure of the outer surface of the component, increasing surface hardness and wear properties drastically. The thickness and quality of every nitride production batch are independently verified in a specialty lab.

LEAK-FREE SEAL

To prevent fuel leaking past the HPFP seal and into the crankcase, our HPFP upgrade includes a molybdenum disulphide seal used for it's stiffness and reduced friction characteristics. To further reduce the chance of failure, the seal is spring energized to provide constant outward pressure, even as the seal ages. What may seem like a small feature -in reality provides a reliable and long-life HPFP upgrade.

PUMP DYNO BREAK-IN

Every IE internal kit is run on our own application-specific fuel pump dyno to verify proper function and break-in before being packaging. This strict QC process, combined with our 100% in-house CNC machining and top-shelf components, is why IE HPFPs have earned their rock-solid reputation for extreme reliability.

INSTALLATION

Installing this fully assembled pump is a fast and easy same as stock bolt-in upgrade. Installing your new HPFP involves disconnecting fuel lines and experienced or professional installation is highly recommended.

Install time around 1-2 hours

FITMENT GUIDE

MAKE MODEL YEAR ENGINE

AUDI

S4

2009-2016 (B8/B8.5)

3.0TFSI Supercharged

AUDI

S5 Coupe

2013-2015 (B8.5)

3.0TFSI Supercharged

AUDI

S5 Convertible

2008-2015 (B8/B8.5)

3.0TFSI Supercharged

AUDI

SQ5

2014-2017 (8R)

3.0TFSI Supercharged

AUDI

Q5

2009-2017 (8R)

3.0TFSI Supercharged

AUDI

A6

2010-2015 (C7)

3.0TFSI Supercharged

AUDI

A7

2010-2015 (C7)

3.0TFSI Supercharged

2016-2017 A6 & A7 CREC 3.0T engines are equipped with both direct injeciton (DI) and manifold injection (MPI) and do not require HPFP upgrades for ethanol use. Compatible IE software tuning is not available for HPFP use on CREC engines. CREC engine is also found in ROW (rest-of-world) markets on some late-model S4 & S5 3.0T as well. CREC engines are easily identified as the supercharger pulley has 4 bolts to attach it to the supercharger instead of a press-fit style.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 57739063691

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 703 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Thomas Piechowicz Product JBL stopped working after 45 days would not recommend this product have had problems frequently is not a quality sound system do not recommend should have taken a warranty out
Birmingham, US
★★★★★ 4
Lots of cards put on
Color: Black
Good for display
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
B
Verified Purchase
Brandon Fish
Massapequa, US
★★★★★ 5
Good value
Color: Black
Nice quality and easy to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 13, 2026
R
Verified Purchase
Ryan
Houston, US
★★★★★ 5
Awesome Display
Color: Black
Great product
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 9, 2026
T
Verified Purchase
Torrey f.
Chelsea, US
★★★★★ 5
Works great!
Color: Black
It has worked great for my sons pokemon cards.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 25, 2025
J
Jesus Javier Sandoval
Los Angeles, US
★★★★★ 5
GREAT
Color: Black, Color: Black
LOVE IT
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026

recommand products