SKU: 60495974808

Garmin GMR 1236 xHD3 6 Open Array Radar Pedestal - 12kW

$3284.99 $3649.99
Save 10%
No.2 Bestseller on ateurope.org >

Pay in installments of $912.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 15 - Aug 20

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Garmin GMR 1236 xHD3 6 Open Array Radar Pedestal - 12kWGMR 1236 xHD3 6' Open Array Radar & Pedestal 12kW SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN ARRAY RADAR Combining high definition imaging with the latest Garmin platform technology, this robust 6 open array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore. Up to 96 nautical mile range Scan Averaging Technology Improved Target Size Processing Split Screen Dual Range Display 100 Knot Commercial

GMR™ 1236 xHD3 6' Open Array Radar & Pedestal - 12kW

SCAN WITH THE MAGNETRON POWER OF GARMIN OPEN-ARRAY RADAR

Combining high-definition imaging with the latest Garmin platform technology, this robust 6’ open-array radar offer superior weather, obstacle and traffic detection for mariners cruising or fishing offshore.

  • Up to 96-nautical mile range
  • Scan Averaging Technology
  • Improved Target-Size Processing 
  • Split-Screen Dual-Range Display
  • 100-Knot Commercial Grade Wind Rating1 
  • Quiet Open-Array Drive Motor

New Scan Averaging Technology

A first for Garmin magnetron radar, scan averaging helps filter out sea clutter and interference to enhance the detection and display of consistent targets.

Angular Target-Size Adjustment

Pulse expansion and angular target-size processing techniques optimize on-screen object shapes for better interpretation at all range scales.

True Echo Trails

A historical “trail” of boats on the water is displayed on the screen, removing relative motion influence to help you quickly identify moving targets and potential collision threats.

Dual Range with Overlay

A single radar antenna is capable of providing split-screen, side-by-side images on your compatible chartplotter, with independent range setting and controls for both close and long range. Overlay either or both ranges on a chart.

Dynamic Auto Gain

Gain automatically adjusts levels to optimum settings for harbors, near shore and offshore in open waters.

Radar Overlay

See overlaid images on your chartplotter’s map screen (with appropriate sensors, sold separately).

High-Resolution Radar

Pick out targets at a distance, thanks to narrow horizontal beamwidth and high antenna gain.

Dual-Radar Support

This provides redundancy and allows each display unit to pull data from different sources.

Dynamic Sea Filter

Radar gain automatically adjusts sea clutter for calm, medium and rough sea conditions.

Auto Bird Gain

Locate flocks of birds at the water’s surface where baitfish are also likely to be found.

MARPA Target Tracking

Track up to 30 targets to help avoid collisions (with appropriate sensors, sold separately).

Guard Zone

Set the safety zone, and receive an alarm when an object enters the zone.

Range and Bearing Cues

Variable range markers and electronic bearing lines allow rapid measurements of distance and bearing to vessels and land.

Includes:

  • GMR xHD3 12 kW open array radar with 6’ antenna
  • Power cable (15 m/49.21 ft)
  • BlueNet™ network cable (15 meters) 
  • BlueNet™ Network to RJ45 Adapter Cable
  • Mounting hardware kit and template
  • Installation instructions

Dimensions:    

  • 6' array - 1938 x 122 x 170 mm / 76.5" x 4.8" x 6.7"
  • Pedestal: 520 x 328 x 314 mm / 20.5" x 12.9" x 12.4"

Weight:    

  • 6' array and pedestal - 29.7 kg

Specifications:

  • Waterproof: IPX6
  • Max Wind Load: 80KT (100KT with optional voltage converter upgrade)
  • Antenna length: 72 in. (183 CM)
  • Rotation Speed (RPM): 24 and 48 RPM
  • Beam Width: 1.1° horizontal, 23° vertical
  • Maximum Range: 96 nautical miles
  • Minimum Range: 20 meters
  • Radar Type: Open-array

Electrical Features:

  • Power Input: 10-32 V DC
  • Power Consumption (Standby): 18 W
  • Typical Power Consumption, Transmitting (Normal mode): 70 W
  • Transmit Power: 12 kW

14-kW versions require optional equipment (sold separately) for 100-knot wind rating

WARNING: This product can expose you to chemicals including NICKEL (METALLIC) which is known to the State of California to cause cancer. For more information go to P65Warnings.ca.gov.

Specifications:

  • Array Size (Inches): 72"
  • Power - Output: 12kW
  • Range - Max (Miles): 96nm
  • Box Dimensions: 6"H x 10"W x 79"L WT: 92.6 lbs
  • UPC: 753759309978
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 60495974808

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 30 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Talagand
Omaha, US
★★★★★ 4
Reasonably adequate room divider
Size: 4 Panel-88'', Color: Beige
I'm reviewing this as I assemble it. Couple things: 1. I didn't expect as much assembly. I've ordered dividers before and they more-or-less came as one unit. Sometimes the panels needed screwing together. These require complete assembly and come largely as three rods: two make up vertical columns and snap together. Another one (called part "C") makes the horizontal columns and you have two of these per panel (one attaches to part "A" and the other part "B"). These parts are metal with a plastic shim. Using the wood screws to attach to part "C" is a real pain in the neck. There's not much holding the panel in place so it's a little tricky. One tactic I've found while I'm assembling that works for the initial connections from parts A and B to their respective "C" rods is to hold the screw in place with a screw driver and then rotating the rod around the screw. This will do a number on your hands if you aren't wearing gloves. This obviously doesn't work when completing the connection. Using a driller driver on this is really near impossible because there isn't anything you can use to secure it in place. You can use it on the first panel, but as it gets longer, it becomes increasingly difficult and because it isn't wood, it's really tight. I considered drilling larger pilot holes but since there are only 4x4=16 screws I need to screw in, I just decided to use my screw driver to complete it. 2. Also related to assembly. When completing the panels (attaching parts "A" and "B" to parts "C" that have the cloth cover on it), you have to be careful that when you tighten that side that it isn't loosening the other side. Because the pilot holes are so tight, you can end up rotating the rod, which rotates it in the same direction as looser on the original side. Having someone hold the "C" rod in place while you screw it in is probably the easiest approach. I didn't have a 2nd person, so I just had to keep flipping back and forth and tightening both sides as I screwed it in. Not the worlds biggest deal, but annoying nonetheless. 3. The way the instructions are written, they seem to suggest building this thing progressively; that is, you do panel 1, then 2, connect them together, then do 3 and connect it, etc. I took a different route that I suspect saved me quite a bit of trouble, and I assembled all four panels first and THEN connected everything together. 4. For the love of God make sure you check that the plastic tip is on the same side for every panel. Otherwise, you have to take one side apart again and reverse it. On the bright side, if this happens, you've essentially bored out the pilot holes to be the correct size... which is having me question if I shouldn't have just bored them out to the appropriate width in the first place. 5. Attaching all of the panels together is also an enormous pain in the ass unless you happen to have an 88" long elevated surface. Attaching the legs either requires you to elevate one side, which will invariably twist the inexplicably cheap material in the bottom connectors... or you can attach them sideways... or you can put this thing upright, having two people hold the panels in place while you use the allen wrench to tighten the bolts on the underside. None of those are particularly great options. NOW on to the utility itself. 1. The panels do let some light through (I didn't believe their advertising, and that was one of the reasons that I bought beige, is that I wanted it to not be too dark). They aren't transparent though, so it isn't that far off from their description. They functionally work great, and keep the mess of wires hidden and when I'm sitting at my desk, actually reflect quite a bit of light into my office. Great! 2. My wife has described these as "the most hideous piece of furniture ever conceived of by man." So it does not have spouse approval factor. Granted, she will seldom be in my office area, so that isn't the end of the world. 3. These are really hard to align in a way that doesn't look a little tacky. There are some plastic connectors but they don't do a bang up job of keeping these in place. Each panel is slightly tilted and it's... quite obvious. I may at some point make my own improvements to these to help make them more level. It's not a particularly expensive product so I wasn't expecting much so it's fine and I'm not going to ding them on the rating because of it. All said, would I buy this product again? Probably not. It's assembly was ~90 minutes which is about 75 minutes longer than I was anticipating spending on this (not including the 5 minute writeup that I'm doing here). But am I going to return it? Also no, if for no other reason I'd be just as annoyed taking it apart and putting it in the original box to return it.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 31, 2023
B
Verified Purchase
Barbara McCloud
Phoenix, US
★★★★★ 5
Nice and strong
Color: Black, Size: Wheel-6 Panel
Nice and strong, tedious, putting together, but very good quality
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 17, 2026
A
Verified Purchase
Al Tompkins
Lake Worth, US
★★★★★ 5
if you are going to be moving them a lot, buy something more sturdy.
Color: Black, Size: Wheel-6 Panel
I use these at our churchc. They are pretty good, not terribly study and the screw that hold the faabric have pulled out in a couple of places. But they wqould work especially well if you were not constantly moving them as we do. They are a bit of a pain to assemble.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2026
J
Verified Purchase
Julie Lincoln
Waukegan, US
★★★★★ 4
Easy to put together , decent quality
Color: Black, Size: Wheel-6 Panel
Purchased for office, easy to put together , durable quality , exactly what we needed to partition a small space
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 15, 2025
A
Verified Purchase
Amazon Customer
Waukegan, US
★★★★★ 5
Nice and sturdy
Color: Grey, Size: Wheel-8 Panel
Good privacy wall
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026

recommand products

DRIED CHERRY
110.00
Mini Stripe Rib Rashie - Sky
70.00
7 Pcs Utensils Set
40.00
Signature Stripe Simple Triangle Top - Coconut
22.00
AJUSA MLS CYLINDER HEAD GASKET TO SUIT BMW X SERIES X5 B47D20B TWIN TURBO DIESEL 2.0L I4
141.00