SCX10 1/10 Scale Full-Width Power Wagon/Honcho/NuKizer Front Bumper with Trail Bar

SCX10 1/10 Scale Full-Width Power Wagon/Honcho/NuKizer Front Bumper with Trail BarFull size Steel, welded front bumper for a SCX10 SCX10 II Power Wagon, Honcho, and Nukizer ***Body will need to be trimmed for custom fit.**Some Pictures may depict Optional Add Ons Specifications: 190mm wide Bumper Top Plate sites approx. 20mm above the top of the frame rail. Mounts using existing holes in frame does not mount like stock plastic bumper(s) (Longer hardware recommended hardware not included See Optional Bumper Hardware Pack available

**Please Note: Our finish options provide a superficial coating and will scratch/chip under normal use. Pros/cons of each can be found below:

-Raw Steel: We recommend a raw steel finish if you want the scale patina of the bare metal, which will rust over time, or if you intend to coat with a harder finish on your own,

-Flat Black: Superficial matte black coating, will scratch under normal use.

-Rustoleum Truck Bed Coating: OUT OF STOCK/NO LONGER AVAILABLE

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight.

*Recommend hardware mounting kits available at the top of the page as an optional add-on.**

Mounting instructions: We recommend removing any plastic cross-members and screwing directly into the frame rails with a nut on the back. For extra tight fit, use a dab of Shoe Goo or E6000 Clear Adhesive between the frame rail and the bracket, and screwing down tight with a nut, and let sit overnight. Recommend hardware mounting kits HERE or at the top of the page as an optional add-on.** Links to additional recommended extras can be found HERE.