TEKTELIC COMFORT Moisture Rope — Plastic, USB-C, 3m

TEKTELIC COMFORT Moisture Rope — Plastic, USB-C, 3mTEKTELIC at INNON COMFORT Moisture Rope Plastic Technical Documents Everything you need before and after commissioning. Spec sheet, user guide, and integration resources all hosted directly so you can share links with your team or drop them into your project documentation. Spec Sheet COMFORT V2 technical specifications rope probe connectivity and accessory compatibility. Download PDF User Guide COMFORT V2 user guide rope probe installation, USB C

← TEKTELIC at INNON® / COMFORT Moisture Rope — Plastic

A Ready For Anything® accessory

A plastic-covered moisture detection rope for the COMFORT V2 — USB-C, 3m. For plant rooms, industrial spaces, and anywhere the fabric version would not survive the environment.

USB-C connection · 3m rope · Plastic cover · Linear leak detection · Works with COMFORT V2

What this accessory does on site

Same linear detection capability as the fabric rope — water contact anywhere along the 3m length triggers a leak event in the COMFORT V2 uplink — with a harder-wearing plastic cover suited to plant rooms, boiler rooms, and industrial environments where the rope is exposed to grit, grease, or mechanical contact.

Run it under raised flooring in a plant room, around the base of a water tank, or beneath plant equipment where a slow leak would otherwise go undetected until it caused damage. The COMFORT V2 maps the event to a BACnet binary value in Niagara.

Compatibility

• Requires TEKTELIC COMFORT V2 sensor body
• USB-C connection — plug and play, no configuration required
• Moisture event reported as a discrete property in the COMFORT V2 uplink payload
• BACnet object mapping via KONA gateway embedded LNS

Why this accessory is Ready For Anything®

🟢 Ready for Today

• 3m of linear leak detection built for tough environments — plastic cover resists grit, grease, and mechanical contact in plant rooms, boiler rooms, and industrial spaces where fabric rope would degrade
• Water contact anywhere along the rope triggers a BACnet event — one COMFORT V2, one LoRaWAN slot, 3m of coverage; map to a Niagara alarm like any wired leak detector
• Catches slow leaks before they become failures — laid under plant equipment or along a pipe run, the rope detects early moisture before it becomes a visible problem

🔵 Ready for Change

• Extends COMFORT V2 without hardware swap — plug in and moisture reporting starts; no new device, no gateway slot consumed, no Niagara reconfiguration
• Harder wearing than fabric for plant room use — designed to survive the environment where leak detection matters most

🔗 Ready for Integrations

• Works within the existing TEKTELIC stack — COMFORT V2 plus KONA gateway plus Niagara; moisture property appears automatically in the existing BACnet device object

Requires TEKTELIC COMFORT V2 sensor body. For office environments consider the fabric cover rope instead. Contact [email protected].