Water Pump Impeller Service Kit – Fits Honda BF35/BF40/BF45/BF50 Outboard Motors (Replaces 06193-ZV5-020, 06193-ZV5-010, 06193-ZV5-000)

Water Pump Impeller Service Kit – Fits Honda BF35/BF40/BF45/BF50 Outboard Motors (Replaces 06193-ZV5-020, 06193-ZV5-010, 06193-ZV5-000)Water Pump Impeller Service Kit Fits Honda BF35 BF40 BF45 BF50 Outboard Motors This complete water pump rebuild kit provides all necessary components for servicing Honda Marine outboard engines from 35 to 50 HP (4 Stroke, all years). It is designed to restore cooling system performance and reliability, ensuring your engine runs at the proper temperature. This assembly is a direct replacement for Honda OEM part numbers 06193 ZV5 020, 06193 ZV5 010, and

Water Pump Impeller Service Kit – Fits Honda BF35/BF40/BF45/BF50 Outboard Motors

This complete water pump rebuild kit provides all necessary components for servicing Honda Marine outboard engines from 35 to 50 HP (4-Stroke, all years). It is designed to restore cooling system performance and reliability, ensuring your engine runs at the proper temperature.

This assembly is a direct replacement for Honda OEM part numbers 06193-ZV5-020, 06193-ZV5-010, and 06193-ZV5-000.

• Installation Type: Direct replacement that meets or exceeds OEM specifications.
• Kit Contents: Includes impeller, housing, gaskets, seals, and all other components required for a full rebuild.
• Engine Compatibility: Fits a wide range of Honda BF35A, BF40A, BF40D, BF45A, BF50A, and BF50D models.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers. This kit replaces the following superseded Honda parts:

Compatible Engine Models

Confirm your engine model/year in the table below.

Technical Specifications

Package Contents

• 1 x Impeller Housing (19221-ZV5-000)
• 1 x Housing Insert (19223-ZV5-000)
• 1 x Impeller Gasket (19233-ZV5-000)
• 1 x Impeller Gasket (19242-ZV5-000)
• 1 x Water Pump Seal (91356-ZV5-000)
• 1 x Impeller Wear Plate (19231-ZV5-000)
• 1 x Impeller (19210-ZV5-003)
• 4 x Bolts (90103-ZY1-000)
• 4 x Collar (91555-ZV5-000)
• 1 x Water Tube Seal (19253-ZV5-000)
• 1 x Impeller Key (90752-ZV5-003)

Installation Guide

1. Begin by disconnecting the battery and removing the propeller for safety.
2. Place a drain pan under the lower unit and remove the drain/fill screws to empty the gearcase oil.
3. Unbolt the lower unit from the engine's upper casing and carefully lower it to disengage the driveshaft.
4. With the lower unit removed, locate and unbolt the water pump housing.
5. Remove the old impeller, gaskets, wear plate, and seals from the housing and driveshaft.
6. Thoroughly clean all mating surfaces, removing any old gasket material or debris.
7. Install the new wear plate, gaskets, and impeller key onto the driveshaft.
8. Slide the new impeller into the housing, rotating the driveshaft clockwise to help seat the vanes correctly.
9. Install the new seals and reassemble the pump housing, torquing the bolts to manufacturer specifications.
10. Carefully reinstall the lower unit, ensuring the driveshaft and water tube align properly.
11. Refill the gearcase with fresh marine gear oil.
12. Reinstall the propeller and test the engine in the water, confirming a strong water stream from the tell-tale outlet.

Troubleshooting & FAQ

How do I confirm this fits my Honda engine?

This kit is specifically designed for Honda BF35, BF40, BF45, and BF50 4-stroke models from all production years. To ensure a perfect match, please check your engine model against the "Compatible Engine Models" list and verify that your existing part number is 06193-ZV5-020, 06193-ZV5-010, or 06193-ZV5-000.

What are the signs of a failing water pump impeller?

Common symptoms of a worn or damaged impeller include the engine overheating (especially at idle), a weak or intermittent stream of water from the "tell-tale" cooling outlet, or a complete lack of water discharge. In some cases, you may find bits of rubber from the old impeller clogging the cooling passages.

How often should I replace my water pump service kit?

As a critical preventative maintenance item, it is recommended to inspect the impeller annually and replace the entire water pump kit every 2-3 years or 200-300 hours of use, whichever occurs first. This interval can be shorter if the engine is operated frequently in saltwater or sandy/silty conditions.

OEM vs. Aftermarket?

This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

How fast do you ship and how much does it cost?

We offer fast global shipping—typically 5–15 days worldwide—and standard shipping is free. Expedited options are available at checkout depending on your location.

What is your warranty and return policy?

This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies exist—even if your model is listed—do not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 5–15 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.