TEKTELIC VIVID V2 — LoRaWAN Occupancy & Environmental Sensor

TEKTELIC VIVID V2 — LoRaWAN Occupancy & Environmental SensorTEKTELIC at INNON VIVID V2 Technical Documents Everything you need before and after commissioning. Spec sheet, user guide, and integration resources all hosted directly so you can share links with your team or drop them into your project documentation. Spec Sheet Technical specifications PIR field of view, sensor accuracy, RF performance, battery life, IP rating, certifications. Download PDF User Guide Full installation and commissioning guide

← TEKTELIC at INNON® / VIVID V2

A Ready For Anything® building block

A wireless occupancy and environmental sensor that gives your BMS accurate presence data — without a ceiling void, without a wiring centre change, without a separate PIR circuit.

IP65 rated · LoRaWAN Class A · BACnet native via KONA gateway · EU868 / US915 · Up to 10 years battery life

The problem this product exists to solve

Occupancy-led HVAC control looks straightforward on paper. In practice, the PIR is in the wrong place, the wiring is not there, or the BMS does not have a free input. The result is HVAC running on a fixed schedule in spaces that are empty half the day.

The VIVID V2 is a battery-powered LoRaWAN sensor that reports presence, temperature, humidity, light, door contact, and shock — all from one device, mounted anywhere, reporting into your existing BACnet supervisory layer via the KONA gateway embedded LNS. No new wiring. No additional BMS inputs. Just a sensor on the wall and a BACnet object in Niagara.

Why the VIVID V2 is Ready For Anything®

🟢 Ready for Today

• PIR occupancy detection — real-time presence reporting in the LoRaWAN uplink; map it to a BACnet binary value and use it as an HVAC enable input in your control logic
• Temperature and humidity — ±0.5°C accuracy — zone-level data where you need it, not corridor-level estimates
• Ambient light sensing — combine with PIR for occupancy-linked lighting and HVAC; if lights are off and motion is zero, the zone is unoccupied
• Door and window contact — open-window detection feeds your BMS; stop heating or cooling a zone where the window has been open for 20 minutes
• Up to 10 years battery life — deploy once, leave it running; no annual maintenance programme, no battery change site visit

🔵 Ready for Change

• IP65 rated — suitable for plant rooms, utility areas, and non-conditioned spaces
• Improved field-of-view temperature sensing — V2 redesign reduces self-heating bias; the temperature reading reflects the room, not the PCB
• Twist-off mount — tool-free installation and battery access; relocate without damage to the surface or the device

🔗 Ready for Integrations

• LoRaWAN Class A — EU868, US915, AU915 — joins any standard LoRaWAN network; pairs directly with TEKTELIC KONA Micro or Enterprise gateways
• BACnet output via KONA embedded LNS — Niagara 4 discovers the sensor as a standard BACnet object; no driver, no middleware, no custom integration
• INNON-tested integration — we have commissioned this sensor in Niagara; we know where the payload mapping friction sits and we document it

A few things worth knowing before you deploy

• TMOS thermal infrared sensor for stationary presence detection — standard PIR only detects movement; the VIVID V2's TMOS sensor detects body heat from stationary occupants; critical for desk occupancy where a person sitting still would otherwise trigger a "vacant" state after a few minutes and kick the HVAC into setback
• Field-of-view temperature sensing — measures radiated object and human temperature within the detection cone, not just ambient air; gives a closer proxy for thermal comfort in the actual occupied zone
• Battery level reported as a percentage — visible in Niagara directly; no voltage calculation, no guessing which sensors are about to fail; you see the full estate at a glance
• Configurable detection sensitivity via OTA — adjust detection thresholds remotely; tune for desk presence vs. room-level occupancy without a site visit or hardware swap after commissioning

For commissioning support, bulk pricing, or Niagara integration guidance contact [email protected].