Lipshome Invisible Concealed Hinge Templates

Lipshome Invisible Concealed Hinge TemplatesOur two step Concealed Hinge Template Jigs are the fastest, easiest and most accurate way to rout the two step mortises required for invisible hinges. Made of 1 2" phenolic for heavy duty use, they measure 5 5 8" x 11 5 8" for maximum router support. Includes an 8" Double Track for mounting the jig and clamping to your work. Clamps not included. Optional 4512 Flip Stop mounts on an optional 4016 16" Double Track (minimum length recommended) for

Our two-step Concealed Hinge Template Jigs are the fastest, easiest and most accurate way to rout the two-step mortises required for invisible hinges. Made of 1/2" phenolic for heavy duty use, they measure 5-5/8" x 11-5/8" for maximum router support. Includes an 8" Double Track for mounting the jig and clamping to your work. Clamps not included.  Optional 4512 Flip Stop mounts on an optional 4016 16" Double Track (minimum length recommended) for quicker part indexing. Allows setting the stop up to 6" from the hinge mortise, with a spacer required for short distances. We recommend two Flip Stops, one for each side of the jig. Optional longer Double Tracks (up to 95" - 4095) available to mount multiple two-step Hinge Jigs and Flip Stops.  Optional 6507 Self-Centering Drill centers itself in the invisible hinge screw mounting hole for a perfectly centered 7/64" pilot hole.

• 8706 is for a 25mm wide x 150mm long shallow mortise, with a 121mm long deep mortise.
  • Lipshome Invisible Concealed Hinge Template – 6 Inch 3 Way hinge
• 8707 is for a 28mm wide x 177mm long shallow mortise, with a 145mm long deep mortise.
  • Lipshome Invisible Concealed Hinge Template – 7 Inch 3 Way hinge
• Check required cutout size carefully before ordering.
• Requires a 1/2" solid carbide upcut spiral bit with a 1-1/2" cut length (15409 or equivalent, sold separately) and a 3/4" Bushing & Locknut (5032K or equivalent, sold separately) to cut the mortises.  If using your own bushing, make sure the nose isn't over 3/8" long.
• Hinge setback (4mm) is built-in according to the manufacturers specs.
• Jig clamps to the work (no nail holes) and, using your plunge router, both the long/shallow and short/deep mortises are cut without moving the jig or part. Has two retractable stops for the short/deep mortise. 

📎 Product Documentation