TORK CRAFT GRINDING WHEEL 150X25X32MM BORE FINE 60GR W/BUSHES FOR B/G GREEN TCGR150-4

TORK CRAFT GRINDING WHEEL 150X25X32MM BORE FINE 60GR W/BUSHES FOR B/G GREEN TCGR150-4Grinding wheel for bench grinder For use with bench grinders to grind steel and carbide tipped tooling. DIAMETER: 150mm WIDTH: 25mm BORE: 32mm GRIT: 60 ABRASIVE: Silicon carbide MAX RPM: 3600 Application: High quality aluminium oxide abrasives bonded and precision engineered to maximize cut rate, wheel life and finish on steel and carbide tipped tooling. Used for offhand grinding steel and carbide tipped tooling. Do not exceed recommended rpm. Never

For use with bench grinders to grind steel and carbide tipped tooling.

Grinding wheel supplied with bushes to accomodate other bench grinder shaft diameters.

A bench grinder is a machine that is attached to a bench. It usually has two grinding wheels, both of them normally of different grits. For example a 60 grit and a 36 grit. One for stock removal and the other made for touching up tools.

Although a bench grinder is generally a shop tool, there are some designed for home use. These machines are not normally used for precision grinding. The outcome is usually coarse, even with a wheel considered for fine grinding. Further grinding may be necessary with a different type of grinding machine.

Bench grinding wheels are mostly made of aluminium oxide that consistantly renews itself when in use. It also has a redused chance of overheating and clogs less frequently. The disadvantage is that these wheels may need to be replaced more often.

Differences between machines: Some bench grinders are smoother and quieter running than others. Some machines might have adjustable speed to prevent overheating. The tool rests might also vary from having a V-grooved to an angled toolrest to allow the grinding of drill bits etc.