AEM High Volume Fuel Rail - F/H-series

AEM High Volume Fuel Rail - F/H-seriesAEM High Volume Fuel Rails feature a 1 2 inch fuel bore capable of flowing enough fuel to support most high horsepower applications. This large bore also dampens back pulses created by larger injectors, and works perfectly with stock injector sizes. An additional 1 8th NTP port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line, and the ends of the rail are pre tapped to

AEM High Volume Fuel Rails feature a 1/2-inch fuel bore capable of flowing enough fuel to support most high-horsepower applications. This large bore also dampens back pulses created by larger injectors, and works perfectly with stock injector sizes. An additional 1/8th NTP port is included to accommodate a nitrous set up or fuel pressure gauge.

A custom fuel line fitting is included for the factory fuel line, and the ends of the rail are pre-tapped to accept -6 or -8 AN fittings for users with custom fuel lines.

Vehicle & Engine Applications

• 90-93 Accord (all) - F22A
• 92-96 Prelude (all) - H22A1, H23A1
• 97-01 Prelude (all) - H22A4

AEM Instruction Manual - (F22/H22/H23) 25-104BK

Images used for illustration purposes only - actual product may vary.

This is a Race Only product that is to be used solely for racing competition. It cannot be used on vehicles that are operated on public streets, roads or highways. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use, including recreational off-road use, could be in violation of local, state and federal laws.