Dynam Smart Trainer V2 4S RC 3D Aerobatic Sport Foam Plane 1.5m

Dynam Smart Trainer V2 4S RC 3D Aerobatic Sport Foam Plane 1.5mThe Dynam RC 3D Smart Trainer is a good looking, high performance RC 3D Foam Aerobatic Sport Plane with bright paint and decals. Its powerful Detrum BM3720A KV650 brushless motor and 4 lithium batteries provide sufficient power to complete aerobatic maneuvers such as vertical climbs, somersaults, and inverted flights. The three wheel landing gear and nose wheel steering design make taxiing and landing easy and pleasant. The winglet design at the wing

The Dynam RC 3D Smart Trainer is a good-looking, high-performance RC 3D Foam Aerobatic Sport Plane with bright paint and decals. Its powerful Detrum BM3720A-KV650 brushless motor and 4 lithium batteries provide sufficient power to complete aerobatic maneuvers such as vertical climbs, somersaults, and inverted flights.

The three-wheel landing gear and nose wheel steering design make taxiing and landing easy and pleasant. The winglet design at the wing tip improves the flight performance. The wings are fixed with carbon tubes and plastic fasteners, which are firmly connected and easy to disassemble and assemble. Use 4S 2600mAh lithium polymer battery to provide greater flexibility and longer flight time.

The Dynam Smart Trainer is a ready-to-fly kit, which means it comes pre-installed with all the necessary electronics, including TomCat Skylord-50A ESC, 650KV brushless motor, 4 14.8V 2600mAh 25C lithium batteries, four 17g servos and one 9g servo, a 6-channel receiver and transmitter. This will save a lot of installation time and let you enjoy a wonderful flying experience immediately. For pilots who want to improve their flying skills without spending too much, the Dynam Smart Trainer is a great value for money.

Features

Durable and lightweight EPO construction.
Lightweight, aerobatic airframe plus sporty decal trim sheet.
Powerful Detrum BM3720A-KV650 Brushless Outrunner motor.
Anti-stall aids built into wings for increased confidence in slow flight.
TomCat Skylord-50A 5A-BEC ESC.
GAVIN 6CH 2.4Ghz radio system.
Detrum MSR66A 6CH 2.4Ghz Mini Receiver iStone 6-Axis Gyro Stabilizer w/ ABS System.
4S 14.8V 2600mAh 25C Li-Po battery w/ XT60 Connector.
Elevator, aileron, and elevator controls.
Fixed landing gear.
Suitable for intermediate or experienced pilots.

Specifications

Aircraft Type: Aerobatic
Wingspan: 1500mm (59in)
Overall Length: 1300mm (51.2in)
Flying Weight: 1800g (63.6oz)
Wing Loading: 54.5g/dm²
CG (Center of Gravity): 75-80mm from the leading edge of the wing at the root
Power System: Detrum BM3720A-KV650 Brushless Outrunner motor - (pre-installed)
Electronic Speed Control: TomCat Skylord-50A 5A-BEC ESC - (pre-installed)
Propeller: 13*6 2-Blade Prop
Servo: 4x 17g micro servos, 1x 9g servo - (pre-installed)
Landing Gear: Fixed
Required Transmitter: GAVIN-6C 2.4Ghz 6-Channel or above
Required Receiver: MSR66A 6CH 2.4Ghz (iStone 6-Axis Gyro Stabilizer w/ ABS System)
Required Battery: 4S 14.8V 2600mAh 25C Li-Po w/ XT60 Connector
Aileron: Yes
Elevator: Yes
Rudder: Yes
Flaps: No
Approx. Flying Time: 8 minutes
Material: EPO Foam
Skill Level: Intermediate
Assembly Time: 1 hour
Age Level: 14+
Recommended Environment: Outdoor

What's the difference between RTF, BNF, SPNP and PNP?

PNP (Plug-N-Play) RC airplanes have everything you need EXCEPT a transmitter, receiver, and battery pack (battery & charger). It contains model kits, Detrum motors, TomCat Skylord ESCs, and servos.

BNF (Bind-N-Fly) RC airplanes come with everything you need to get in the air EXCEPT the Transmitter and battery pack (battery & charger). It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, and an iStone gyro receiver. They are easy to use, versatile, and safe, making them the perfect choice for beginners and experienced pilots. The BNF (Bind and Fly) version, receivers such as the MSR66A work exclusively with Detrum transmitters.

Dynam SPNP (PNP + iStone All V2) RC airplane is a versatile and user-friendly aircraft designed for RC enthusiasts. Combining an easy plug-and-play setup with the advanced iStone stabilization system, it suits a wide range of pilots. The PNP + iStone version includes the iStoneAll V2 6-axis gyro stabilizer, compatible with major radio transmitter brands like Futaba, Spektrum, Detrum, and etc., providing excellent versatility and flight performance.

iStone All V2 Gyro Stabilizer Features:

6-axis high-precision stabilization
Auto-recovery and one-click rescue
Compatible with most receivers
Adjustable parameters and sensitivity via 3-in-1 programming card with LCD
Gyro-off mode for manual flight

The PNP configuration and iStone All V2 stabilization system make this plane ideal for beginners, while offering features appreciated by intermediate pilots.

Dynam SRTF version is based on the standard RTF (Ready to Fly), which integrates the iStone 6-Axis Gyro Stabilizer w/ ABS System: RC airplanes get everything in a box to fly. The radio system (Transmitter and receiver), battery pack (battery and charger), and all other required electric parts are included and pre-installed. It contains model kits, Detrum motors, TomCat Skylord ESCs, servos, Detrum transmitters, iStone gyro receivers, battery, charger, and adapter. RTF planes are a great way to enjoy the thrill of flying without too much hassle.

SRTF-6C Version: Includes a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Gavin-6C transmitter, MSR66A iStone gyro receiver, battery, charger, and adapter.

SRTF-8C Version: Features a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Gavin-8C transmitter, MSR66A iStone gyro receiver, battery, charger, and adapter.

SRTF-DT9 Version: Comes with a PNP kit, Detrum motors, TomCat Skylord ESCs, servos, Blitz-DT9 transmitter (programming & telemetry), SR86A-G 8-channel gyro receiver, battery, charger, and adapter.