Pay in installments of $299.99 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 19 - Aug 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Holley EFI Terminator X Stealth GM LS 4150 - Black 550-102124X Crank 4 Injectors 650 HP Features: Terminator X Stealth 4150 Kits for either 24x or 58x LS engines Supports up to 650HP with Four 100lb. hr. Injectors Terminator X Max kits provide plug and play Transmission control for GM Transmissions Internal 1bar MAP sensor, built into the Terminator X ECU. All of the wiring exits below the fuel injector bowls, for a completely stealth installation Air entry machined to fit most stock style air cleaners with
24X Crank - 4 Injectors - 650 HP
Features:
- Terminator X Stealth 4150 Kits for either 24x or 58x LS engines
- Supports up to 650HP with Four 100lb./hr. Injectors
- Terminator X Max kits provide plug and play Transmission control for GM Transmissions
- Internal 1bar MAP sensor, built into the Terminator X ECU.
- All of the wiring exits below the fuel injector bowls, for a completely stealth installation
- Air entry machined to fit most stock style air cleaners with air cleaner locator provisions
- External fuel pressure regulator required, set to a base pressure of 58.5 PSI, such as 12-886
- Integrated ignition timing control ?"Plug and play with factory LS coil sub harness and OEM LS coils ?" no external boxes/modules needed to run Coil Near Plug
- High Resolution Full Color Touchscreen for Initial Setup, Tuning, and Gauge Displays
- Simple Calibration Wizard (answer a few questions about your engine and it creates the base map, then starts tuning on its own!) - NO laptop required!
- Self-tuning ECU means you don’t have to be a computer/tuning wiz to have EFI!
- Self-tuning ECU means you don?™t have to be a computer/tuning wiz to have EFI!
- 4 Inputs ?" 12v, Ground, 5v, and Frequency, for things such as additional pressure sensors, or activation triggers for nitrous activation, or a trans brake (Fuel and Oil Pressure Inputs are pre-terminated)
- 4 Outputs ?" Ground, PWM - , for accessories such as; fans, boost control, nitrous control, IAC Kit, and More
- The included Genuine Bosch LSU 4.9 Wideband Oxygen Sensor provides real-time Fuel Map Learn!
- OEM Style TPS/IAC, for years of dependable service
- Available in 3 finishes: Shiny, Black and Gold
- Compatible with Holley EFI digital dashes, gauges and fuel system accessories
Specs:
| Accelerometer Support | Yes |
|---|---|
| Boost Control | Yes |
| Brand | Holley EFI |
| CAN-BUS Support | Yes |
| CFM | 950 |
| Coil Per Cylinder Ignition Support | Yes |
| Color | Black |
| Crank Reluctor | 24x |
| Datalogging Support | Yes |
| Distributor Included | No |
| Dry Nitrous Control | Yes |
| e85 Support | No |
| EGT Support | Yes |
| Emission Code | 3 |
| Finish | Black |
| Flange Size | 4150 |
| Flange Style | Squarebore |
| Forced Induction Support | Yes |
| Fuel Filter Included | No |
| Fuel Hose Included | No |
| Fuel Injectors Included | Yes |
| Fuel Pressure | 58.5 PSI |
| Fuel Pressure Regulator Included | No |
| Grade Type | Performance |
| Handheld Included | Yes |
| Ignition Timing Control | Yes |
| Ignition Type | GM LS 24x |
| Individual Cylinder Fuel Corrections | No |
| Injector Size | 100 lb/hr @ 58.5 PSI |
| Inlet / Outlet Size | 6AN |
| Intake Manifold Included | No |
| Knock Retard Support | Yes |
| MAP Sensor | 1bar |
| Max Horsepower Rating | 650 |
| Multi-Stage Nitrous Control | Yes |
| Product Type | EFI System |
| Progressive Nitrous Control | Yes |
| Sale Category | Air and Fuel Delivery |
| Self-Tuning | Yes |
| Terminator LS Options | Fuel, Spark |
| Throttle Bore | 1.75 in. |
| Throttle Position Sensor Included | Yes |
| Transmission | N/A |
| User-Tuneable | Yes |
| Warning | California Proposition 65 |
Application:
| Year | Make | Model | Submodel |
|---|---|---|---|
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 18 reviews
Sort
Product Reviews
★★★★★ 5
Look great!
Size: 40x7 2Pcs, Color: Black
Love the way these turned out in my office! I connected 3 shelves in a row across the wall to make one long shelf and it looks great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 3
Nice looking. Not very sturdy. Easy to install.
Size: 40x7 2Pcs, Color: White, Size: 40x7 2Pcs, Color: White
Update: The shelf slopes at about a 45° angle when you put anything more than about a pound on the outside edge of it. Perfectly fine up against the wall. Just seems like the braces inside aren't long enough to really give the stability needed. Bracket is nice and tight against the wall. Had to add braces underneath to hold a small plant, a photo and a small container. Wa sloping more and more each week
The shelves look great and we're pretty easy to install. They have a single bracket that is very easy to mount to the wall and get nice and level..
The downside is that the bracket isn't long enough to go between studs. This seems like a pretty simple oversight. I mean why wouldn't you make it long enough to go stud to stud?
Secondly and maybe more fatally the bars that go inside the shelf to support them coming out from the wall are significantly shorter than the depth of the shelf. Unfortunately this means the shelf is only supported the first few inches coming out from the wall so there is the potential for a slight lean forward..
The anchors they send are trash. Cheap soft plastic that just tears and bends with a screwdriver. I would suggest spending $2 and grabbing your own anchors from Ace or home Depot.
The shelves are essentially made of a high grade cardboard kind of wood. They are not going to support much weight or last for years and years however there incredibly affordable and look nice and easy to install. Long as your expectations are right you'll be happy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 23, 2023
★★★★★ 5
Great product.
Size: 24x6 2Pcs, Color: Black
Very good sturdy item
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2026
★★★★★ 5
Worth it if you're a figure/doll collector!
Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch, Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch
I ordered these shelves to display my figures and dolls, and I love the way they look! I ordered 2 sets of the 4 pack in black with black hardware. After looking at reviews, I took the jump and bought them and don't regret it!
TL;DR: Listing is accurate, don't use the paper measurement thingy, quality is what you'd expect for the price, doesn't come pre-drilled, easy enough to put together, over all worth it if you're looking for smaller, decent quality, decent price shelves especially if you display figures or dolls.
1. Listing: They are accurate to the measurements! They're only 5.5 inches deep, so there isn't much (if at all) any room for layering. They do feel small, but the listing is accurate!! Mine are paired next to each other to create a "longer" shelf. DO NOT use the paper measurement thingy. Another review mentioned it was un-even, and after holding it to mine, yeah, it was off. I'd highly recommend a stud finder, small leveler, and a white gel pen or marker to mark where to drill if you do.
2. Assembling & Mounting: The shelves didn't come with pre-drilled holes for the mounting options because it was easy enough to screw into. I will warn you that the small screws only came with a singular extra, so be careful about losing them in case it's the same for you... I'd highly recommend doing this on a FLAT surface. I stood the shelves on the side that would be flat against the wall and set the brackets against it. I put one screw in on each side (both brackets have 1 screw to hold them where I want) then I laid it on its top and tightened and added the other screw. I may have done more work than needed, but none of mine are leaning forward or backward super far. I used the "load bearing" mount simply because I like the look but if you intend to put books, I would do the "no drop" design and possibly get some other L brackets for more support since books can get heavy. PLAN WHERE YOU WANT THE BRACKETS if you intend on doing the "load bearing" design or adding any more brackets.
4. Quality: I kind of expected the wood to be a bit thicker/more sturdy feeling, but upon realizing they didn't come pre-drilled, it made more sense. THEY CHIP AND SCRATCH EASILY. If you're like me and don't really care as long as you cant see/don't notice it, then this isn't any concern but they may come damaged cause some of our mail couriers aren't the best. If you stick them in the corner like I did, please be careful about it slipping! I accidentally dropped the second one from a 21-inch TV stand after adding brackets, and the corner chipped (yes, I measured). The hardware is standard screw quality, and the brackets could be better. After reading the broken bracket reviews plus the price, I honestly wasn't expecting much, but they aren't too bad! You can always replace them with another one you like!
5. Overall: I'd say these are worth the price and I see why "customers usually keep this item"! They were easy enough to mount, even if you aren't the handiest man out there. I'd definitely recommend these if you're looking to display anime figures or dolls like I do! They're nice for adding vertical space without sticking out of the wall too much! Definitely good for smaller spaces! I'm very happy with this product and will more than likely return to this listing if I want some decent and affordable shelving!
Thank you for reading my review, Im usually hesitant to buy online so I hope it helps you decide if you wanna buy these shelves as well!
(Also, in case anyone is wondering the layout, the longest shelf will be 1, the middle length will be 2, the shortest length will be 3. It's the last image of the review!)
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 8, 2025
★★★★★ 5
Stylish, Sturdy and Perfect for Small Spaces
Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch, Color: A. Black Board & Black Brackets, Number Of Shelves: 4, Size: 16-inch
Love these shelves! They are sturdy, easy to install, and perfect for organizing bathroom essentials.
I used them above the toilet, and they fit perfectly in a small space. They helped me keep things organized while also adding a modern and decorative touch.
Great quality and very functional. Highly recommend for anyone looking to upgrade their bathroom without taking up extra space!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 5, 2026