Room sealing air kit for AIRTIGHT HOUSES ONLY: DG Ivar 5, 8 and Aste (DESPATCHED DIRECT FROM DG)

Room sealing air kit for AIRTIGHT HOUSES ONLY: DG Ivar 5, 8 and Aste (DESPATCHED DIRECT FROM DG)Some properties are particularly "airtight" and even some new builds will fall into this category. In these cases an air vent is required to allow air into the room where the stove is situated, to replace the air the stove sends skywards. This product enables you to connect your stove to the outside of the building with a flexible pipe, thereby avoiding the need for an air vent in the room. Note that with a 5kW stove an air vent is often not required

Some properties are particularly "airtight" and even some new-builds will fall into this category. In these cases an air vent is required to allow air into the room where the stove is situated, to replace the air the stove sends skywards. This product enables you to connect your stove to the outside of the building with a flexible pipe, thereby avoiding the need for an air vent in the room.

Note that with a 5kW stove an air vent is often not required at all. See our advice page on air vents.

This product is supplied by DG and includes a) the parts required to upgrade the stove to allow direct air, and, b) the parts required to get from the stove to outside the room.

The DG three-part external upgrade kit: YOU WILL USE THE TOP PART PLUS ONLY ONE OF THE OTHER TWO PARTS (depending on whether you want to draw air from under the floor or from the rear of the stove, usually through the wall behind the stove).

IVAR 5 LOW CAN ONLY USE REAR EXIT AND CANNOT TAKE ADVANTAGE OF PART C.

CONTACT US FOR ESTIMATED DELIVERY DATE