Hollyland Spares - Solidcom C1 Wired Headset for Hub (for SOLIDCOM C1)

The Hollyland Solidcom C1 Wired Headset for Hub (Model: HL-C1-SH03) is the official replacement master headset designed exclusively to plug directly into the Solidcom C1 / C1 Pro Hub Base.

While the standard wireless headsets roam freely on set, this specialized wired unit anchors the director, technical supervisor, or video engineer to the central hub command station. Adding this headset to an 8-headset wireless loop expands your total local user count to 9 active communicators on a single hub.

Core Hardware & Design Features

• Dedicated Master Anchor Node: Plugs natively into the hub base station, instantly turning the hub administrator into an active member of the intercom ring. It allows the director to monitor channels, assign A/B groups, or use the master "Announce" key to override and mute all remote wireless headsets for critical emergency notes.

• Rotatable 360° Boom Mic with Lift-to-Mute: The unidirectional electret capsule sits on a rugged boom arm that can swivel a full 360 degrees. This layout lets you wear the ear cushion over either your left or right ear. Flipping the boom mic vertically past your forehead automatically mutes the microphone stream.

• Threaded 3.5mm Safety Connector: Terminated with a right-angle 3.5mm TRRS mini-jack paired with a specialized locking screw-collar. Once threaded clockwise into the Hub's headset port, it cannot be accidentally yanked or pulled out by an unexpected tug on the production floor.

• Ultra-Lightweight Ergonomic Build: Weighing just 170 grams (6 oz), it features a highly flexible steel-spring headband, a deep over-ear acoustic cushion, and an alternative on-ear porous pad alternative included in the box to prevent heat fatigue over long broadcast shifts.

Technical Specifications Matrix

What's Packed In The Spare Box?

• 1 × Solidcom C1 Wired Headset (with integrated 61" cable)

• 1 × Foam Microphone Windsunk Cushion

• 1 × Leatherette On-Ear Earmuff Padding

• 1 × Leatherette Over-Ear Earmuff Insulation Padding

Ecosystem Compatibility Note: The original Solidcom C1 wired hub headset utilizes a 3.5mm locking jack terminal layout. If you are operating the newer upgraded Solidcom C1 Pro Hub, be aware that some specific iterations of the Pro hub series transition to a multi-pin custom structural socket (like a 10-pin interface) for advanced dual-mic ENC data pass-through. Always verify the physical port layout on your current hub chassis before purchasing this 3.5mm replacement variant.