Adaptavate Breathaplasta Thermal Insulating Plaster 9kg Fast Set

Adaptavate Breathaplasta Thermal Insulating Plaster 9kg Fast SetAdaptavate Breathaplasta Thermal Insulating Plaster 9kg Breathaplasta THERMAL from Adaptavate is a quick setting, low density plaster designed for rapid build up on the internal face of solid walls. Maximum thickness per coat is 40mm and multiple coats can be applied in a single day with approximately two hours setting time per coat. Typical application is 80mm total thickness in two or more passes of the trowel (base coat 40mm and top coat 40mm).

Adaptavate Breathaplasta Thermal Insulating Plaster - 9kg

Breathaplasta THERMAL from Adaptavate is a quick setting, low density plaster designed for rapid build-up on the internal face of solid walls. Maximum thickness per coat is 40mm and multiple coats can be applied in a single day with approximately two hours setting time per coat. Typical application is 80mm total thickness in two or more passes of the trowel (base coat 40mm and top coat 40mm).

Breathaplasta Thermal is a simple Internal Wall Insulation (IWI) system that breathes with you in your building. A fabric first solution to reducing your energy bills for warmer walls & healthier homes.

Breathaplasta Thermal is a highly insulating thermal base layer well suited to all solid masonry walls. Apply directly to any solid masonry external facing wall – brick, block and stone. A 50mm coat will improve the U value of a standard solid wall by around 60%.

Key Features:

• Fastest setting breathable plaster on the market (setting time of 2 hours)
• Reduces risk of condensation and mould
• Highly insulating thermal base (tested k-value of 0.127W/mk)
• Vapour permeable and moisture buffering - allows your home to 'breathe'
• Fast and easy to install - faster completion times reduce labour costs
• UKCA & CE marked with A1 fire rating
• Made in the UK
• Fully Recyclable Product

Substrates:

• Breathaplasta Thermal is designed to be applied to solid masonry walls only.
• Suitable walls are constructed from one or more of the following materials; brick, block, and stone.
• Substrates must be uniformly flat. Dub out and consolidate uneven masonry (see surface preparation).
• Porous backgrounds should be misted with clean water before plastering to help control suction (see surface preparation)

Samples available, please email - [email protected] for more info.