Pay in installments of $1132.38 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 11 - Aug 16
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
RCF TTW 4-A 90-240V 2-Way 3200W Wide-Directivity Powered Line-Source Array Speaker w/RDNet -2 x 10"For Live Stage, Theater, and Clubs 100 x 50 Waveguide 2 x 10" Neodymium Woofers 1. 5" Neodymium Compression Driver 45 Hz to 20 kHz Frequency Response 3200W of Class D Amplification XLR Inputs and Output Onboard FiRPHASE Technology RDNet for Remote Control and Monitoring powerCON I O Audio engineers and professional audio rental houses looking for a powered speaker with outstanding tonal balance and intelligibility while maintaining an unobtrusive and
- For Live Stage, Theater, and Clubs
- 100 x 50° Waveguide
- 2 x 10" Neodymium Woofers
- 1.5" Neodymium Compression Driver
- 45 Hz to 20 kHz Frequency Response
- 3200W of Class-D Amplification
- XLR Inputs and Output
- Onboard FiRPHASE Technology
- RDNet for Remote Control and Monitoring
- powerCON I/O
Audio engineers and professional audio rental houses looking for a powered speaker with outstanding tonal balance and intelligibility while maintaining an unobtrusive and adaptable footprint will be thrilled with the black RCF TTW 4-A, a dual 10", 2-way 3200W active wide-directivity, line-source array loudspeaker, designed for small- to medium-sized areas for DJs, audio engineers, and rigging technicians in clubs, houses of worship, concert venues, and live stage applications. The highly flexible speaker fills the gaps between point source and line array speakers, providing augmented coverage adaptability.
The TTW 4-A utilizes a 3200W Class-D amplifier to power the two 10" neodymium woofers and 1.5" neodymium compression driver, yielding a frequency response of 45 Hz to 20 kHz. Onboard FirPHASE filters deliver optimum imaging and phase response with minimal latency. Built-in DSP provides thermal and RMS protections plus a soft limiter. The onboard controls include a RDNet bypass button and a system setup encoder, which offers gain reduction, time delay, and preset selection.
The rear panel offers an XLR input and XLR thru for daisy chaining to additional speakers. Two etherCON ports are available for connecting to RCF's RDNet protocol, which allows the speaker to be controlled by the RDNet software remotely. Standard powerCON input and output jacks are employed for straightforward integration with typical power configurations. The TTW 4-A's Baltic birch plywood cabinet is waterproof and features built-in carry handles and rigging points. A powerCON power cord is included.
Flexible Deployment
- Top-quality sound for highly demanding events indoors or outdoors in small- to medium-sized areas. The loudspeaker's flexibility fills the gaps between point source and line array speakers, providing the audio engineer with augmented coverage adaptability. This approach combines all the advantages of TT+ technology, such as controlled dispersion, outstanding clarity, and extreme power with three coverage options, multiple rigging accessories, remote control, and recallable presets. A groundbreaking solution for a vast range of applications.
Waveguide
- 100 x 50° waveguide with coherent directivity.
- This special waveguide design allows the deployment of multiple TTW 4-A for remarkable control of directional characteristics. In difficult acoustic environments, intelligibility is significantly increased.
RCF RDNet
- RDNet is a robust management network and control platform for small, medium, and large arena-sized sound systems as well as complex and extended installations. Based on a proprietary network protocol, RDNet provides intuitive control and monitoring of every connected device/object in the RCF audio system. Each device has DSP to address specific presets or modifications of parameters to single or groups of objects. A network user can change level, delay, EQ (linear phase FiR as well), and other settings, including advanced subwoofer configurations. RDNet is not only designed for loudspeakers—you can control parameters and routing of multiple RCF devices, such as digital matrixes or amplifiers.
FiR Phase
- RCF speakers are designed using a proprietary and advanced FiR filtering technology, conceived to deliver transparent sound, absolute clarity, and perfect stereo images to the listener.
- The special FiRPHASE filters allow to achieve coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies to the system.
Rigging Flexibility
- All the mechanical structure is built in high-strength structural steel. Thanks to this material, the rigging has a high safety factor.
- The cabinets feature a steel pole mount cap, multiple suspension brackets on top and bottom and two M8 lateral screws.
- Optional rigging accessories include a U-bracket, a multi-purpose fly-bar, and adjustable poles for floor stand or subwoofer pole. The compactness and lightweight of the system, combined with top of class rigging system, guarantee a fast hanging procedure.
State-of-the-Art Class-D Amplifiers
- Two independent Class-D amplifiers with 1600W total power output per module make this loudspeaker one of the most powerful column array modules on the market compared to its size.
Temperature Control
- Internal temperature control is driven by air flowing via natural convection, cooling its critical parts. The housing of the electronics and the amplifiers in a solid aluminum extrusion block acts as an efficient thermal sink.
Engineered for Maximum Reliability
- The housing is tightly fitted and sealed to the rear of the cabinet. A recessed and protected panel houses the connections for power and signal.
Input Board
- The analog input board is fully featured offering XLR input and output link, preset selections, and a pre-loaded equalization bypass switch. Ethercon input and output connect the system in a daisy chain topology for RDNet networked management.
DSP Processing
- The integrated digital processor is based on a state-of-the-art 32-bit DSP running at 48 kHz sampling rate. The calculation capacity largely exceeds the processing needs and the DSP is never pushed to the limit. It runs algorithms for the crossover, the equalization of the transducers, the limiter, and system presets such as high-pass filters, air absorption, and cluster-size corrections.
Onboard Presets
- L1. Linear: Totally linear preset. The speaker curve response is perfectly linear. It is ideal when listening outdoor or in low-reverberation rooms, at medium distance, and at a medium- or high-sound pressure level.
- L2. Linear High Pass: This preset is the same as L1 with a 24 dB/oct. high-pass filter at 100 Hz. To be used when the speaker is a part of a bigger system, when it's a satellite of a subwoofer system or when the application is speech reproduction.
- L3. Linear Low Level Playback: This preset is linear with a gentle +3 dB boost at low frequency. To be used when playing at lower level or for playback music.
- L4. Linear Indoor: This preset is linear with a gentle -3 dB shelf at low frequency. It is ideal for a better sound balance in reverberant rooms and for indoor speech reproduction.
- C1. Close: Close listening preset. To be used when the average listener is closer than 3 meters. The preset shows a gentle -3 dB shelf in high frequencies. The sound balance is natural and never aggressive.
- C2. Close High Pass: This preset is the same as C1 with a 24 dB/oct. high-pass filter at 100 Hz.
- F1. Far: Far listening preset. To be used when the average listener distance is more than 10 meters. The preset shows a +3 dB shelf in high frequencies to compensate the air absorption. The clarity and intelligibility in distance are improved.
- F2. Far High Pass: This is the same as F1 with a 24 dB/oct. high-pass filter at 100 Hz.
- S1, S2. Side Coupling Presets: These presets are linear when the speakers are coupled side to side. These presets are properly designed for speakers coupled with a horizontal coupling angle from 60 to 80°. The front of the cabinets shall be split and the rear of the cabinets shall be close. The S2 preset features the low-frequency, high-pass filter.
- U1, U2. Vertical Coupling Presets: These presets are linear when the speaker are coupled vertically. The U2 preset features the low-frequency, high-pass filter.
Precision Transducers
- RCF develops advanced transducer technology including the application of high-tech materials such as Neodymium, Carbon Fiber, Pure Titanium, Kevlar, Kapton, and Mylar hybrids.
- With over 70 years of design and manufacturing pro audio systems, RCF has been instrumental in technological inventions such as carbon fiber cone molding, double silicon spiders, inside/outside voice coil windings to edge wound voice coil manufacturing, and pure titanium diaphragm forming.
- Our latest developments have resulted in designing advanced neodymium magnetic circuits, radically new voice coil ventilation systems, and groundbreaking direct-drive voice-coil assemblies.
Weatherproof Baltic Birch Plywood
- The TT 4-A cabinet is carefully engineered to pack the maximum output and superb sound quality in the minimum size.
- The cabinet is made of high-quality Baltic birch plywood with every layer glued with a special adhesive that makes the cabinet completely water-resistant, even before the painting process.
Powder Coated Grille
- The heavy-duty front grille is powder coated.
- A special transparent-to-sound foam backing on the inside of the grille helps to further protect the transducers from dust.
Aluminum Side Handles
- The cabinet features two die-cast aluminum side handles with ergonomic rubber hand grip and two recessed handles on the back.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.6 ★★★★★
Based on 14 reviews
Sort
Product Reviews
★★★★★ 5
Quality pipes for a good price
Size: 42inch Tall (NOT included wood planks), Color: Black
This item is just as described. It is the pipe fitting portion of a 3 shelf unit. You must buy your shelving separately once the rails have been installed. Purchasing the pieces this way was much more cost-effective than separately buying each part from the hardware store, and all the pieces were clean and ready to be mounted unlike the pieces from the hardware store. It was moderately difficult to hang, since you are trying to keep everything very level. I imagine the distance between each rail will be a factor in how easy this is to level. The difficulty may have also stemmed from the fact that we were mounting it in a small toilet room and had little room to maneuver during the installation process. Still, it is a good product and we are considering purchasing a second one for another location in our home.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2019
★★★★★ 4
Not real Black Iron, but works just as well
Size: 42inch Tall (NOT included wood planks), Color: Black
First, these parts that I got were not real Black Iron pipes like you would pick up at a hardware store, they are like furniture grade tubes for an IKEA shelving system. The thread would fit 3/4 pipe from like HD, but they are not the same, I know this because I just bought some of the pipe and parts for a small shelf right before ordering this. I should have known from the price, the real stuff is kind of pricey, but nicer. The elbows and T-connectors as well as the flanges seem more like galvanized steel painted black. HOWEVER, the end product is pretty nice and very versatile as to where you would want to put it. It is still pretty sturdy, and if screwed into a stud, I believe it would hold a lot of weight. The entire shelving system is painted black, so unlike Black Iron, it will not stain your hands black when handling it. Putting this together took about 30 min, the longest part was adjusting angles and lengths to get it flat and squared, but was not hard at all. This kit does NOT come with shelf boards, so length of that is up to you. It also came with mounting screws, but they are thin and I would suggest as your getting boards for shelves, also pick up some beefier screws, U used #12 - 1 1/4" wood screws with the sleeves for drywall and a little longer for securing it into a stud. All in all, this black pipe shelf looks nice, is nice and will work out great, just know, it is not the real Black Iron pipes and parts you would get from a hardware store, but the threads would fit if you wanted to add to this. I only knocked down one star because of this, and if I am going to buy more of these, I would prefer the real stuff and not go with this one.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2020
★★★★★ 5
Love these!!!
Size: 42inch Tall (NOT included wood planks), Color: Black
Super sturdy..looks excellent. Industrial and clean lines....lots of space for our kids bathroom. The wood does not come with it but was easy to get lowes. We actually added another shelf on the top bracket to make 4 shelves. They're nice and wide to fit baskets and organize things. For teenagers bathroom! My husband installed by himself and he isn't the handiest of guys but it it wasn't bad. I do recommend getting pipe fastners to secure the boards to the pipes so they don't shift around
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 2, 2021
★★★★★ 5
Nice pipe shelves! Excellent quality!
Size: 28inch Tall (NOT included wood planks), Color: Black
I really like the fact that the pieces were already painted. I compared the cost of the unit to buying the pieces from the big box store and this was far more cost effective for me.
The installation went well and I ended up creating a template for installation. For the template, I measured the width of one of the flanges (part that mounts to the wall), cut a piece of material the same width. I found the center and drew a line down the middle. I then placed the section with top and bottom holes over the center line and then marked the other two holes.
I then drilled out the holes, put on wall and used level to plumb. I used small pilot drill bit to drill through the template into the wall.
One thing to note is that I did not use the included anchors instead opting for some from the big box store.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 29, 2020
★★★★★ 5
Well built and priced
Size: 42inch Tall (NOT included wood planks), Color: Black
I saw these on line and decided I could probably just build one on my own. After pricing the parts out at the local hardware store, it was almost the same price, and opted for the less hassle pre-fab online kit. The material is well made, same as the hardware store, except the threads are shorter for easier assembly, and its painted for a cleaner look. I bought the 12"Dx42"L kit, and although I knew the measurements, it was a lot more massive than it looked in the picture. An 8' or 10"x 24"L kit would have fit my needs better. I only assembled 2 of the 3 sections, and will use the single section leftover for another shelf elsewhere, so it wasn't a problem. I'm happy with the end result and would recommend.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 28, 2020
recommand products
Bonham Three Light Outdoor Wall Sconce in Black
139.00
GB Single Hole Bathroom Faucet - Brushed Nickel TLG10303U#BN Toto
611.07
Windsor One Light Outdoor Wall Sconce in Black Patina
116.00
UltraMax Elongated 1.6 GPF 1-Piece Toilet - Bone MS854114S#03 Toto
514.70
Washlet S300e Round Bidet Toilet Seat - Sedona Beige SW573#12 Toto
914.50