Peavey PVX-12 2-Way Passive Speaker

Peavey PVX-12 2-Way Passive SpeakerPeavey's PVX 12 is an 800W passive (unpowered) 12" two way loudspeaker that's versatile enough for front line reinforcement or use as a floor monitor. The PVX 12's lightweight, roadworthy molded polypropylene exterior and multiple fly points make it ideal for life on the road or permanent installation. Voiced for live music or speech applications, these two way speaker systems will handle 400 watts program and 800 watts peak power. Custom Waveguide

Peavey's PVX-12 is an 800W passive (unpowered) 12" two-way loudspeaker that's versatile enough for front-line reinforcement or use as a floor monitor. The PVX-12's lightweight, roadworthy molded polypropylene exterior and multiple fly points make it ideal for life on the road or permanent installation.

Voiced for live music or speech applications, these two-way speaker systems will handle 400 watts program and 800 watts peak power. Custom Waveguide technology yields a 100º by 50º coverage of critical vocal frequencies ensuring the audience can hear every word. The unique cabinet design allows the PVX-12 to be utilized as a screaming floor monitor that the performers are guaranteed to hear on stage.

Peavey PVX-12 Features:

• Two-way sound reinforcement enclosure
• 12” heavy-duty woofer with 2 3/8” voice coil & 50 oz. magnet
• RX 14 compression driver, with 1.4 inch titanium diaphragm
• 400W program/800W peak power handling
• Patented Quadratic Throat Waveguide™ technology, 100 by 50 degree coverage
• Asymmetrical horn aims the sound down 10°, at the audience, not
• over their heads
• Crossover network for driver protection and EQ
• Durable plastic injection-molded trapezoidal enclosure
• Extra angled section on right side allows floor monitor use
• Full-coverage heavy-duty perforated steel grilles, with powder coat finish
• Pole mount molded-In
• Top, bottom and right side flying point inserts

Peavey PVX-12 Specifications:

• Frequency Range, 1 meter on-axis, swept-sine in half space environment: 48 Hz to 21 kHz
• Frequency Response, 1 meter on-axis, swept-sine in anechoic environment: 60 Hz to 20 kHz (±3 dB)
• Usable Low Frequency limit (-10dB point anechoic): 51 Hz
• Power Rating (program): 400W
• Peak Power Capacity (peak): 800W
• Sound Pressure Level, 1 Watt, 1 meter in anechoic environment: 96 dB SPL, (2.83V input)
• Maximum Sound Pressure Level (1 meter): 119 dB SPL continuous 125 dB SPL peak
• Radiation Angle measured at -6dB point of polar response: Nominal: 100° horizontal X 50° vertical (Axis of the vertical main polar lobe is angled down 10°, resulting in the angular pattern with respect to straight ahead being +15, -35°)
• Transducer Complement:Heavy-duty 12” woofer with 2 3/8” voice coil & 50 oz. magnet RX™14 1.4” titanium diaphragm dynamic compression driver
• Box Tuning Frequency: 62 Hz
• Crossover Frequency (internal passive): 2.8 kHz
• Impedance (Z)
• Nominal: 8.0 Ω
• Minimum: 6.7 Ω
• Input Connections
• One four-pin twist-lock connector paralleled with a 1/4” phone jack
• Enclosure Materials & Finish: Black ABS plastic with textured surface, black powder-coated perforated grille.
• Mounting provisions: Unit has two sets of two M10 inserts, one pair on the top, and one pair on the bottom. Additional mounting points are a set of four M8 inserts on the top, and a set of four on the right side in the handle recess, and a set of four on the bottom, which use thePeavey VersaMount™ 70+ mounting bracket.
• Four rubber feet provide vibration free floor or stage use, and a molded-in stand mounting cup is on the bottom.
• Dimensions (H x W x D)
• Front: 24.50 in. x 16.10 in. x 15.00 in., 622 mm x 409 mm x 381 mm
• Rear: 22.75 in. x 8.75 in. x 15.00 in., 578 mm x 222 mm x 381 mm
• Net Weight: 37 Lbs. (16.8 kg)