Charge Pipe Kit for 2009-10 (Long Version) 135i/335i/1M N54 Engine

Charge Pipe Kit for 2009-10 (Long Version) 135i/335i/1M N54 EngineIntroducing our Charge Pipe for the 2009 10 (Long Version) 135i 335i and 2011 12 1M with the N54 Twin Turbo Engine. Key Features: Made in the USA! Manufactured in house. Increase throttle response and decreases turbo lag. Compatible with factory diverter valves or aftermarket factory style diverter valves. Lightweight High Grade 6061 Aluminum Piping. Throttle body matched 3" piping. Retains factory style o ring throttle body lock flange. Precision CNC

Introducing our Charge Pipe for the 2009-10 (Long Version) 135i/335i and 2011-12 1M with the N54 Twin Turbo Engine. 

Key Features:

• Made in the USA!  Manufactured in house.
• Increase throttle response and decreases turbo lag.
• Compatible with factory diverter valves or aftermarket factory style diverter valves.
  
• Lightweight High Grade 6061 Aluminum Piping.
• Throttle body matched 3" piping.
• Retains factory style o-ring throttle body lock flange.  Precision CNC machined throttle body flange ensures leak free connection to throttle body.  Quick and easy connection and disconnection to throttle body.  Ideal connection compared to the silicone hose and hose clamp connection found in all other aftermarket diverter valve upgrade pipes available in the marketplace.
• Precision CNC machined MAP sensor flange ensures leak free connection.
• Charge Pipe features beaded ends and T-bolt clamps to prevent intercooler piping from coming off from boost.
• Factory diverter valve sound baffle, which causes turbulence in the factory pipe, is removed.
• Optional Type III Hard Black Anodizing (for stealth and OEM look).  Hard anodizing helps improve durability of intercooler piping.  Resists bent or dented piping.
• Includes all hardware for complete installation.
  
• Limited Lifetime Warranty.
  

Another parts development directly from our 135i Time Attack racing program.  The factory diverter valves were causing an issue of not being able to hold up against the rigors of high boost application, therefore they needed to be replaced.  Thus, attention was brough to the factory diverter valve pipe and the need to optimize for maximum performance on a race car facilitated the need for a new pipe to be built.  Often ignored, charged intake airflow characteristics greatly affect throttle response, turbo lag and ultimately maximum power potential.  Smooth bends and minimal obstructions are ideal.  This is not the case with the factory diverter valve charge pipe.  On the factory diverter valve charge pipe features a sound baffle for the diverter valves.  This sound baffle is connected on the side of the factory diverter valve charge pipe which splits airflow.  This causes turbulence inside the pipe which slows the charge intake air velocity (speed of the air traveling inside the pipe).  By removing this turbulence (by eliminating the factory diverter valve sound baffle), increased throttle response, decrease turbo lag and ultimately higher maximum power potential can be realized.  Our Diverter Valve Charge Pipe eliminates this sound baffle and thus eliminating the unnecessary turbulence in the diverter valve pipe, keeping charge intake air velocity at its maximum.  Apparently, BMW thought the same thing as later model (2009-10) did not come with this baffle.

Since one of the reasons for changing out the factory diverter valves was to prevent boost leaks (from prematurely opening on high boost), causing boost leaks while upgrading the diverter valve would be counterproductive.  During our research and development, the connection at the throttle body was looked over very carefully.  The factory diverter valve is connected to the throttle body using an o-ring inside the throttle body flange which is locked in place by a c-clip, which works very well.  It also makes removal/installation quick and easy.  Our testing had shown it could hold quite a bit of boost.  During our testing, we had pressure tested this connection up to 25 PSI.  The reason why we stopped at 25 PSI was because at 25 PSI, one of the intake pipes on the turbo blew off and we could not test any higher.  However, we were confident that it would easily hold over 25 PSI as the throttle body flange showed no signs of failing.  Also, keep in mind, this type of connection is used throughout the engine, in many crucial areas like the coolant radiator system as well as the clutch system.  If BMW did not believe in the durability of this type of connection, they would not use it in such important areas.

Many of our competitors use a silicone hose connection for the throttle body connection.  It is not designed for a silicone hose connection which is used by all the other brand diverter valve pipe upgrades in the market.  The throttle body lip is too short and there are no "beads" to prevent the silicone hose from blowing off under boost.  Even though it is the easiest way to "rig" together, it is not ideal.  The best way to connect the new diverter valve pipe to the throttle body is to replicate the same connection which we did.  We spent a lot of resources developing and manufacturing this factory style connection for this reason.

The same issue came with the MAP sensor.  The MAP sensor seals to the factory diverter valve pipe via a o-ring on the sensor itself.  Having a hole in a silicone hose will definitely cause a boost leak as it will not properly seal.  Therefore, again we CNC machined our own replica MAP sensor flange that utilizes the same factory o-ring seal.

2009-10 Charge Pipes:

From June 2009 and on, BMW changed the intercooler piping on the N54 engine.  This revised intercooler piping essentially was exactly the same as the previous years except for one change.  The "accordion" style rubber elbow between the lower intercooler piping and the diverter valve charge pipe was now integrated into the diverter valve charge pipe.  In previous years, this "accordion" rubber elbow was a separate part and could be removed.  Since, it is now part of the new revised diverter valve charge pipe, it could not be removed.  We now have a new diverter valve charge pipe designed specifically for the new N54 (June 2009+ build date).  Since the June 2009+ models charge pipes include what is known as "the meth elbows", they cost $50 more which is still cheaper than purchasing a "meth elbow" that other companies that sell them for $100.  If you have a 2006 to 6/2009 and you want the "elbow" that replaces the "accordion" OEM elbow, you can purchase the 2010 model charge pipe.

Charge Pipe Finishes:

The Diverter Valve Charge Pipe is available in the same 3 finish options as our intercoolers.  It is available in a brushed (plain) or mirror polish finish standard.  It is also available in our Type III Hard Black Anodizing for the guys that want the stealthy, factory look.  An added benefit of the Type III Hard Black Anodizing is that it hardens the aluminum piping and makes it more durable against damage (like dropping the pipe).

We also offer our Diverter Valve Charge Pipe in any anodizing color of the rainbow you want (special order) and is available in only Type II Anodizing (aesthetics).  It is available as a special order item and is not stock. 

Brush (or plain) finish is also available.

1/8" NPT Bungs (For Methanol or Nitrous Injectors):

With the popularity of methanol injection systems and nitrous systems, our charge pipe come with two 1/8" NPT threaded bung (for methanol or NOS injectors) welded to our charge pipe.  There is one bung per pipe.  This allows quick and easy installation of methanol/nitrous injectors that are used in methanol injection systems and nitrous systems.  Each 1/8" NPT bung will come with a plug so that you can run with or without the methanol injector.  This is perfect for those who do not have the Methanol Injection yet but plan to do so in the future.

Also, the 1/8" NPT bung can be used as a vacuum/boost source (with the optional vacuum port fitting).  Perfect place to connect your boost gauge or other devices to.  The N55 engine does not have a pressurize hose or fitting from the factory that you can easily tap into.  Now you do!

CAUTION: This product is intended for OFF ROAD COMPETITION USE ONLY. Not legal for use on pollution controlled vehicles upon public road/highways. THIS PRODUCT IS FOR SALE FOR ALL 49 STATES EXCLUDING CALIFORNIA.  In addition to vehicle use verification, a Vehicle Compliance Waiver needs to be signed.

THIS ITEM IS NOT FOR SALE, INSTALLATION, OR USE ON LICENSED VEHILES IN THE STATE OF CALIFORNIA. 

The item is for sale for international customers without restriction.

Please contact us at [email protected] or call us at (626) 334-6609