Two-piece forged aluminum caliper
Stiffer body for sharper pedal feel and consistent piston travel under load.
Pay in installments of $155.00 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 12 - Aug 17
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Slim SL6 Front Wheel 6-Piston Big Brake KitSlim Series Front Axle 6 Piston Slim SL6 Front 6 Piston Big Brake Kit The TTSPORT Slim SL6 is a front axle 6 piston big brake kit engineered for drivers who need stronger, more repeatable stopping power without jumping to an oversized caliper package. A forged aluminum body, staggered 28 30 36 mm piston layout, and a slim 120 mm caliper height keep wheel clearance requirements practical for many 17 inch and larger setups. Why Builders Choose the SL6
Slim Series · Front Axle · 6-Piston
Slim SL6 Front 6-Piston Big Brake Kit
The TTSPORT Slim SL6 is a front-axle 6-piston big brake kit engineered for drivers who need stronger, more repeatable stopping power without jumping to an oversized caliper package. A forged aluminum body, staggered 28/30/36 mm piston layout, and a slim 120 mm caliper height keep wheel-clearance requirements practical for many 17-inch and larger setups.
Why Builders Choose the SL6
6-piston staggered bore design
28/30/36 mm pistons balance pad pressure across the leading and trailing edges to reduce taper wear.
Heat-insulated stainless pistons
Heat-insulated pistons with dust boots limit fluid temperature rise during back-to-back stops.
Two-piece high-carbon iron rotors
330 or 355 mm × 28 mm vented discs with CNC aluminum hats for heat capacity and reduced unsprung mass.
Stainless braided lines
Three-layer PTFE / SUS304 / PVC construction for firm pedal modulation.
Slim 120 mm caliper height
Designed for tighter spoke profiles where standard 6-piston bodies will not clear.
Technical Specifications & Kit Options
| Brake Caliper | ||
|---|---|---|
| Series | Slim Series | |
| Model / Application | SL6 | |
| Axle Position | Front | |
| Piston Count | 6-piston | |
| Piston Type | One-piece heat-insulated pistons | |
| Piston Diameter | 28 mm × 2 / 30 mm × 2 / 36 mm × 2 | |
| Caliper Dimensions | L 350 mm × W 135 mm × H 120 mm | |
| Total Piston Area | 46.8 cm² per caliper | |
| Manufacturing Process | Two-piece forged aluminum body | |
| Net Weight | 3.60 kg per caliper, without pads | |
| Surface Finish | High-temperature gloss coating | |
| Recommended Wheel Size | 17 in or larger | |
| Recommended Rotor Size | Ø330–355 mm × 28 mm | |
| Brake Rotor Options | ||
| Rotor Option | 330 mm Rotor | 355 mm Rotor |
| Rotor Material | Heat-treated high-carbon cast iron | Heat-treated high-carbon cast iron |
| Axle Position | Front | Front |
| Rotor Dimensions | Ø330 mm × 28 mm | Ø355 mm × 28 mm |
| Construction | Two-piece rotor assembly | Two-piece rotor assembly |
| Ventilation | Internally vented | Internally vented |
| Rotor Mounting | Fixed or floating, depending on rotor size & vehicle application | Fixed or floating, depending on rotor size & vehicle application |
| Directional Design | Yes — left/right specific | Yes — left/right specific |
| Rotor Face Pattern | Curved slot / Grain slot / Wave slot / Drilled and slotted | Curved slot / Grain slot / Wave slot / Drilled and slotted |
| Brake Pads | ||
| Compatible Rotor Material | Iron / steel rotors only | |
| Operating Temperature Range | 0–600 °C | |
| Average Friction Coefficient | μ ≈ 0.38 (varies with temp, line pressure, rotor condition) | |
| Lines | ||
| Brake Line Construction | Three-layer reinforced | |
| Brake Line Material | PTFE inner / SUS304 stainless braid / PVC outer sheath | |
| Brake Line Fittings | Vehicle-specific; caliper-side and chassis-side vary by application | |
| Brackets | ||
| Rotor Hat Manufacturing Process | CNC-machined | |
| Rotor Hat Material | High-strength aluminum alloy | |
| Caliper Bracket Manufacturing Process | CNC-machined | |
| Caliper Bracket Material | Carbon steel | |
| Caliper Mounting Type | Radial mount with vehicle-specific brackets | |
| Fitment & Installation | ||
| Minimum Spoke Clearance | 82 mm | |
| Recommended Wheel Size | 17 in or larger | |
| Rotor Diameter Selection | 330 mm for tighter wheel packages; 355 mm for larger swept area and more thermal headroom | |
| Bedding-In Procedure | Required | |
Two-piece rotors pair a heat-treated high-carbon iron friction ring with a CNC-machined aluminum hat. The 28 mm vented core gives real thermal mass for repeated high-speed stops, mountain descents, and spirited street driving.
Package List
Calipers ×2
2 × SL6 forged 6-piston front calipers (left / right)
Brake Pads
1 set high-temperature performance brake pads for both front calipers
Brake Rotors ×2
2 × Two-piece directional rotors (330 mm or 355 mm × 28 mm)
Caliper Brackets ×2
2 × CNC carbon-steel caliper brackets, vehicle-specific
Rotor Hats ×2
2 × CNC aluminum rotor hats
Brake Hoses ×2
1 set stainless steel braided brake lines with vehicle-specific fittings
Mounting hardware is included.
Will It Fit? Your 3-Step Check
Wheel spoke shape, rotor hat offset, and vehicle-specific bracket geometry all affect real-world fit. Measure your wheel against the SL6 caliper envelope (350 × 135 × 120 mm) before purchase, or request a fitment template from our team.
1. Wheel Diameter
The SL6 requires a 17 in or larger wheel.
2. Spoke Clearance
The SL6 requires a minimum 82 mm spoke clearance.
3. Vehicle Model
Confirm year, make, model, trim, and front hub/spindle details at checkout so we cut the correct brackets.
Many factory and aftermarket 17s clear, but spoke shape and barrel profile matter. Send us your wheel make/model or a tracing and we'll confirm before you order.
Installation & Break-In
- Caliper mounting uses radial mount with vehicle-specific brackets.
- Brake line fittings are vehicle-specific; caliper-side and chassis-side vary by application.
- The SL6 front kit is designed to add front clamp force without forcing a rear-bias change on most platforms.
- New pads and rotors must be properly bedded to lay an even transfer layer on the rotor face.
- Skipping bedding-in causes vibration, uneven bite, and shortened pad life.
- We supply a bedding procedure with every kit.
Frequently Asked Questions
Will the SL6 fit under my factory 17-inch wheels?
The SL6 needs at least 82 mm of spoke clearance and a 17 in or larger wheel. Many factory and aftermarket 17s clear, but spoke shape and barrel profile matter. Send us your wheel make/model or a tracing and we'll confirm before you order.
Should I choose the 330 mm or 355 mm rotor?
Pick 330 mm for tighter wheel packages or lighter unsprung mass. Pick 355 mm when you want the largest swept area, more thermal headroom for repeated hard stops, and slower pad temperature rise on long descents or track days.
Do I need to upgrade the rear brakes too?
Not required. The SL6 front kit is designed to add front clamp force without forcing a rear-bias change on most platforms. If you do significant track use, a matched rear upgrade can rebalance the system, but the front kit can run as a standalone upgrade.
Will I need a different brake master cylinder?
In most street and fast-road applications, no. The 46.8 cm² total piston area is sized to work with stock master cylinders on most platforms. Hard track use with very aggressive pads may benefit from a larger master, but it is not required out of the box.
Is bedding-in required?
Yes. New pads and rotors must be properly bedded to lay an even transfer layer on the rotor face. Skipping this step causes vibration, uneven bite, and shortened pad life. We supply a bedding procedure with every kit.
Are vehicle-specific brackets included?
Yes. Each kit ships with CNC carbon-steel brackets and braided line fittings matched to your declared vehicle. Confirm year, make, model, trim, and front hub/spindle details at checkout so we cut the correct brackets.
Ready to spec your SL6 build?
Need fitment confirmation, a custom caliper color, or a wheel-clearance template before you buy?
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 10 reviews
Sort
Product Reviews
★★★★★ 5
great sunscreen for face
Size: 1.5 Ounce (Pack of 1)
this is my favorite stick sunscreen for the face. it does have a slight white cast when you first apply it but it goes away once it’s been rubbed into the skin. so many sunscreens say they have a “non-sting formula” but this is the only one i have used that truly doesn’t burn/sting the eyes when applied on the eyelids or when you sweat into your eyes. doesn’t have that traditional “sunscreen smell” either. it leaves a healthy glow to the skin as well. three swipes on all areas of the face is enough coverage. it is a little pricey but i think it lasts quite awhile. highly recommend trying this sunscreen.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 10, 2025
★★★★★ 3
Has a white cast
Size: 1.4 Fl Oz (Pack of 1)
This sunscreen has a white cast and you cannot rub it in enough for it to go away. It does protect very well from the sun and I did not burn at all using it. I would use this at the beach or outside but not for everyday use or under make up because of the white cast
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 18, 2026
★★★★★ 5
Easier to Apply, Less Weight & Pkg, TSA Approved Solid
Size: 1.5 Ounce (Pack of 1)
Will never go back. This is super easy to use, to carry with in your bag when you’re gone all day (no spills!), doesn’t feel greasy, works right away because its mineral. In some ways, moisturizes so you don’t even need a primer!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 1, 2026
★★★★★ 5
Good Find
Size: 1.5 Ounce (Pack of 1)
This is easy to use and doesn’t cause my sensitive skin to breakout.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 31, 2026
★★★★★ 5
For your baby’s soft skin
Size: 18 Fl Oz (Pack of 1)
Aveeno Baby Daily Moisture Lotion is a reliable, affordable moisturizer that hydrates well and is gentle enough for everyday use. Fragrance-free and hypoallergenic, making it suitable for many babies with sensitive skin.
Lightweight texture that absorbs quickly and doesn't leave a heavy greasy feel.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 2, 2026