Bike Bicycle Professional Headset Fork Crown Race Removal Tool - Crown Race Remover - Great for Bikes

Bike Bicycle Professional Headset Fork Crown Race Removal Tool - Crown Race Remover - Great for BikesCROWN RACE REMOVER: This great tool is designed to quickly and easily remove the crown race without damaging the fork steerer tube. With it, you can get the job perfectly done within a second. EASY OPERATION: Simply mount both V notched edges under your crown race. Use a 14mm wrench tightening the screws alternately and evenly after the blades initially contact the race. Meanwhile, please take time to observe the tools clamp(edges) positioning and the

CROWN RACE REMOVER: This great tool is designed to quickly and easily remove the crown race without damaging the fork steerer tube. With it, you can get the job perfectly done within a second.
EASY OPERATION: Simply mount both V-notched edges under your crown race. Use a 14mm wrench tightening the screws alternately and evenly after the blades initially contact the race. Meanwhile, please take time to observe the tool’s clamp(edges) positioning and the crown race. Once it feels tight & snug, turn the fork over and lightly tap with a hammer or mallet. NOTE: Please stop and reset the blades if the crown race comes off unevenly.
MADE TO LAST: The tool is made of durable heat-treated steel, which will prevent it from bending and wearing off through years of use. SPECS: Range Length: 25.4~28.6mm, 1" and 1-1/8".
WHY SHOULD YOU HAVE IT: Bike forks, which hold the front wheel of the bike, have a component called the crown race that sits at the bottom of the fork and contacts the headset, which is the set of bearings that allow the fork to rotate smoothly. The crown race is pressed onto the fork and can be difficult to remove without the right tools. BIKEHAND crown race remover tool is specifically designed to do the job so that the fork can be replaced or serviced.