AddOn Infinera TRX100015/05 Compatible TAA Compliant 1000Base-CWDM SFP Transceiver (SMF, 1550nm, 80km, LC, DOM)

This AddOn 1000Base-CWDM SFP transceiver is engineered for reliability, efficiency, and seamless integration into CWDM-based networks. Designed to be fully compatible with Infinera TRX100015/05 systems and fully TAA compliant, this transceiver delivers cost-effective, high-performance data transmission over single‑mode fiber (SMF) at 1550 nm. It supports long-haul links up to 80 km, making it ideal for metro, access, and core networks that demand scalability without sacrificing signal integrity. Built to meet rigorous industry standards, it combines robust optical performance with real-time monitoring and easy plug‑and‑play deployment for minimal downtime.

• High‑speed, reliable 1.0 Gbps CWDM SFP transceiver: Delivers stable 1000Base-CWDM performance for long‑haul fiber networks, ensuring dependable data transmission across city-wide and regional links.
• Wavelength and distance optimized: 1550 nm CWDM wavelength chosen for reduced attenuation over SMF, enabling links up to 80 km while maintaining strong signal integrity and low error rates.
• SMF compatibility with LC duplex connector and DOM: Designed for single‑mode fiber with LC duplex interface and built‑in Digital Optical Monitoring for real‑time visibility into TX/RX power, temperature, and module status.
• TAA compliance and Infinera TRX100015/05 compatibility: Engineered to meet trade compliance requirements and to slot into Infinera ecosystems with guaranteed compatibility, offering a cost‑effective alternative without sacrificing performance.
• Industry‑leading reliability and ease of deployment: Plug‑and‑play form factor with hot‑swap capability on many platforms, plus robust thermal and environmental tolerances to sustain steady operation in data centers and carrier networks.

Technical Details of AddOn Infinera TRX100015/05 Compatible TAA Compliant 1000Base-CWDM SFP Transceiver (SMF, 1550nm, 80km, LC, DOM)

• Data rate: 1000 Mbps (1.0 Gbps) 1000BASE-CWDM compliant transceiver for CWDM networks.
• Wavelength: 1550 nm CWDM channel for low attenuation and broad reach over SMF fiber.
• Distance: Up to 80 km, enabling long‑haul connectivity without repeaters in many deployments.
• Fiber type: Single-Mode Fiber (SMF) compatible, optimized for CWDM bandwidth and dispersion characteristics.
• Connector: LC duplex optical connector for standard SFP deployments.
• DOM (Digital Optical Monitoring): Integrated monitoring provides live data on transmit power, receive power, temperature, and supply voltage for proactive maintenance and quick fault isolation.
• Form factor: SFP (Small Form-factor Pluggable) hot‑swappable module suitable for a wide range of switches, routers, and optical transceivers that support SFP ports.
• Compliance and compatibility: TAA compliant; designed for seamless compatibility with Infinera TRX100015/05 hardware configurations and common enterprise and carrier networking environments.
• Operating environment: Built to tolerate standard data‑center and telecom rack conditions; manufacturer‑recommended operating ranges align with typical network equipment specifications.
• Power consumption: Optimized for efficiency to minimize impact on power budgets in dense deployments and high‑density fiber channels.

How to install AddOn Infinera TRX100015/05 Compatible TAA Compliant 1000Base-CWDM SFP Transceiver (SMF, 1550nm, 80km, LC, DOM)

Install this SFP transceiver with the standard hot‑swap procedure used by compatible network devices. Always verify compatibility with the host device before installation and ensure the CWDM wavelength matches the designated network channel. Follow these steps to install:

• Power down or prepare the host device for hot‑swap insertion according to the platform’s guidelines, or verify hot‑swap support if your hardware allows it.
• Identify the correct SFP port on the switch, router, or optical device, and align the transceiver with the slot orientation.
• Insert the transceiver firmly into the SFP slot until it seats and locks in place with an audible click or a firm, positive engagement.
• Attach a clean LC duplex fiber cable to the transceiver’s LC connector, ensuring the fiber is terminated to SMF and the CWDM path is correctly aligned with the channel plan (1550 nm in this case).
• Power on the device (if powered down) and access the management interface to verify link status. Enable DOM monitoring if supported by the host device to observe TX/RX power, temperature, and other key metrics.
• Run a light‑level optical test or a basic throughput test to confirm stable data transmission across the link. If issues are detected, re‑seat the transceiver, verify fiber cleanliness, and confirm CWDM channel alignment.

Best practices for installation include keeping fiber paths clean, using proper ESD precautions, and validating link budgets against your network design. The transceiver’s 1550 nm CWDM wavelength is optimized for low dispersion over long SMF runs, but matching the exact CWDM channel plan in your network is essential to achieve the promised 80 km reach. For managed networks, enable DOM to monitor link integrity and quickly identify any degradations that could impact performance.

Frequently asked questions

• Q: Is this transceiver fully compatible with Infinera TRX100015/05 hardware?
• A: Yes. It is designed as a compatible, TAC‑compliant option that works with Infinera TRX100015/05 systems and similar CWDM deployments, providing reliable performance and seamless integration.
• Q: What optical specifications define this module?
• A: It is a 1000BASE-CWDM SFP transceiver operating at 1550 nm with a maximum reach of 80 km over SMF and an LC duplex connector, featuring DOM for real‑time monitoring.
• Q: Can I use this module in a standard data center or carrier network?
• A: Yes. The module is designed for both enterprise and carrier environments that use CWDM SFP optics and require reliable long‑haul performance with easy deployment.
• Q: Does it support Digital Optical Monitoring (DOM)?
• A: Yes. DOM is integrated to provide live status on TX power, RX power, temperature, and other critical parameters to simplify maintenance and troubleshooting.
• Q: What should I consider when selecting a 1550 nm CWDM SFP for an 80 km link?
• A: Ensure the link budget accounts for fiber attenuation, connector losses, and CWDM channel plan. The 1550 nm wavelength helps minimize loss over long SMF distances, but the exact budget must align with network design and equipment capabilities.
• Q: Is this transceiver suitable for hot‑swapping?
• A: In most supported devices, SFP modules are hot‑swappable. Check your device’s documentation for hot‑swap compatibility and ensure proper handling to avoid ESD or physical damage.