SKU: 13271473693

Skar Audio RP-1200.1D Monoblock 1200-Watt Class D MOSFET Subwoofer Amplifier

$90.00 $100.00
Save 10%
No.2 Bestseller on ateurope.org >

Pay in installments of $25.00 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 20 - Jul 25

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Skar Audio RP-1200.1D Monoblock 1200-Watt Class D MOSFET Subwoofer AmplifierSkar Audio designed the RP 1200. 1D to be a powerful efficient and highly reliable monoblock car amplifier. With those goals in mind came the RP 1200. 1D as the newest addition to the extremely popular RP series. This amp is rated at a conservative 1 200 watts RMS power at a 1 ohm operating load and is capable of putting out over 1 600 watts max power at 1 ohm. Featuring a high speed mosfet power supply 4 way protection circuitry advanced pcb board

 Skar Audio designed the RP-1200.1D to be a powerful efficient and highly reliable monoblock car amplifier. With those goals in mind came the RP-1200.1D as the newest addition to the extremely popular RP series. This amp is rated at a conservative 1 200 watts RMS power at a 1 ohm operating load and is capable of putting out over 1 600 watts max power at 1 ohm. Featuring a high speed mosfet power supply 4-way protection circuitry advanced pcb board and other internal high quality components the RP-1200.1D shines when compared to anything in it s class when it comes to power and reliability. This amplifier comes with a remote subwoofer level control and bass knob allowing the user to have full control over their bass from the front of the vehicle. This makes for a great amplifier when looking for serious power to get your system loud and will work great on a single subwoofer around 1 200 watts rms or a pair of subwoofers around 600 watts each. Class D circuitry design. Specifications Skar Audio RP-1200.1D Monoblock Amplifier Class D Monoblock Subwoofer Amplifier 4 Way Protection Circuitry: Thermal Voltage Speaker DC RMS Power @ 2 Ohm: 800 Watts x 1 Channel (14.4v) RMS Power @ 4 Ohms: 500 Watts x 1 Channel (14.4v) RMS Power @ 1 Ohms: 1 200 Watts x 1 Channel (14.4v) Max Power @ 1 Ohms: 1 600 Watts x 1 Channel (14.4v) MOSFET Power Supply Soft Turn on Circuit Tri-Mode Capable / Bridgeable Frequency Response: 20 Hz ~ 250 Hz Signal to Noise Ratio: 85 dB Damping Factor: 150 < Low Pass Filter (Variable): 50 Hz ~ 220 hz Subsonic Filter: 0 ~ 50 Hz Remote Bass Knob & Wire Included 4 Gauge Power and Ground Terminals Working Voltage: 8.5V - 14.4V Fuse Rating: 100 Amp Dimensions: 18 (Length) x 7 (Width) x 3 (Height).

rw-shelf3-box-ls

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 13271473693

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 25 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
K
Verified Purchase
K. Torrance
Grantham, US
★★★★★ 1
Cheap, screw holes don't line up, screen is to short, and bars take WD-40 and a mallet
This has been my worst purchase on Amazon ever. DO NOT BUY. My first issue was that bars #4 and #5 would not go together, I ended up buying WD-40 and a mallet and that kind of got them together. Now I went to but the screen on (which is almost see thought) and the screen is to short. I can't attached the bottom bar to the tall bar. The screw hole is in the wrong spot, so the screen is not secure. No amount of pulling on the screen will make it grown .25" longer. Since I can't get the bars secure the walls are not steady and fall over easily. The feet did go together very nice. I can't return them according to Amazons policy. I bought 2 sets. I'm not going to try to build the other set I have. And I can't take apart the first set, since the bars are so tightly together. Also the polls have rust on them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 10, 2023
R
Verified Purchase
Rick
Carnegie, US
★★★★★ 3
Very Poor Built Quality
Color: Black, Size: 3-Panel
They use cheap tarp like cloth that you might find on a tent, so it is not suitable as a teleconferencing background without blur applied. The legs are flimsy and lack rubber feet, so it will scratch floors. The tubing is flimsy and very hard to move and adjust. This is only good if you are setting it up somewhere like a gym or a garage.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 12, 2025
M
Verified Purchase
Mamacita
Draper, US
★★★★★ 5
Great separator for room.
My kids love it. It separates their half of the room.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 25, 2025
G
Verified Purchase
Gwendolyn
Cuba, US
★★★★★ 5
These are PERFECT for my Art Show coming up!
This is going to be PERFECT for my Art Show display. And also....EASY to put up and take down as well as store. I'm so grateful to have found them! They are super light weight. And sturdy for my application. And elegant and have clean lines for my display. I have ivy draped and also fairy lights which make it look classy yet simple! Love them!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 27, 2022
S
Verified Purchase
Sami 🛒
Fort Morgan, US
★★★★★ 5
Rustic Wall Shelves That Just Work
Size: 17inch, Color: Black
I bought these six floating shelves to add some storage and a cohesive look to a few walls around the house. The set has a rustic real wood vibe with an industrial edge, and the black finish keeps things feeling clean and understated. It turned out to be a practical way to create space without committing to a bulky cabinet, and I appreciated having multiple pieces to arrange in different rooms. Installation was straightforward. The package includes 12 brackets, wall anchors and screws, plus clear directions, so I could get them up without much hassle. It takes about eight minutes to mount each shelf, and the hardware feels solid. The shelves can hold around 20 pounds each, which is plenty for everyday items like books, a plant, an alarm clock, or framed photos. In use, the look is exactly what I wanted: sturdy, simple, and able to blend with existing decor across the bedroom, bathroom, kitchen, and living room. The real wood surface and the exposed metal brackets give a cohesive, rustic vibe that elevates plain walls and makes it easy to rotate items in and out. One small note is that the boards are 17 inches long and about an inch thick, so planning spacing and wall space matters a bit. The brackets being visible is part of the look, not a flaw, but it means accurate mounting is important. Overall I am very pleased with the set and it earns a solid five stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026

recommand products

K&N 99-00 Mercedes Benz CLK430 4.3L-V8 Drop In Air Filter - 33-2183
68.99
STYLIZED SUIT
1497.50
BE Power Equipment 90350004BE WATER SEAL Set
121.78
Unstitched 3 Piece Digital Printed Lawn Suit
1326.50
UNSTITCHED EMBROIDERED SUIT
3146.50