Magneto Stator Coil For Suzuki RV125 RV200 Van GZ125 Marauder 98-11 32101-13G10

Magneto Stator Coil For Suzuki RV125 RV200 Van GZ125 Marauder 98-11 32101-13G10Magneto Generator Engine Stator Coil For Suzuki GZ125 Marauder 1998 2011 RV125 2003 2011 RV200 VanVan 2017 FEATURES: Direct replacement to your original unit Plug and play, direct fit, easy installation. Highest grade lamination materials. Highest grade copper windings, resistant to 200 degrees Celsius. Pick up pulsar coil included. Connector included. All products shipped are tested. SPECIFICATIONS: Condition: Aftermarket 100% Brand New Quanity: 1PC

Magneto Generator Engine Stator Coil For Suzuki GZ125 Marauder 1998-2011 RV125 2003-2011 RV200 VanVan 2017

FEATURES:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.

SPECIFICATIONS:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Replacement Part Number:32101-13G10,32101-12F00

Dimensions :
Interior diameter : 35mm / 1.39"
Exterior diameter : 92mm / 3.64"
Pole's Thickness : 25mm / 0.99"
Pole's Width : 11mm / 0.43"

Other specifications :
Number of wires: 5
Number of pins: 5
Number of plugs: 2
1Plug's L*W:16.5mm/0.65"*13.1mm/0.51"
2Plug's L*W:10.3mm/0.40"*6.2mm/0.24"
Number of fixation holes: 3
Number of poles: 18
Fixation holes length: 36mm / 1.42"

FITMENT:
For Suzuki GZ125 Marauder 1998-2011
For Suzuki RV125 2003-2011
For Suzuki RV200 VanVan 2017

PACKAGE INCLUDED:
1x Generator Stator Coil

NOTICE:
Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.