SKU: 18034505787

Victron Centaur Charger - 24 VDC - 30AMP - 3-Bank - 120-240 VAC

Sale price$294.14 Regular price$326.82
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Victron Centaur Charger - 24 VDC - 30AMP - 3-Bank - 120-240 VACCentaur Charger 24 VDC 30AMP 3 Bank 120 240 VAC Features: Quality without compromise Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic

Centaur Charger - 24 VDC - 30AMP - 3-Bank - 120-240 VAC

Features:

  • Quality without compromise -  Aluminium epoxy powder coated cases with drip shield and stainless steel fixings withstand the rigors of an adverse environment: heat, humidity and salt air. Circuit boards are protected with an acrylic coating for maximum corrosion resistance. Temperature sensors ensure that power components will always operate within specified limits, if needed by automatic reduction of output current under extreme environmental conditions.
  • Universal 90-265V AC input voltage range and also suitable for DC supply (AC-DC and DC-DC operation) All models will operate without any adjustment needed over a 90 to 265 Volt input voltage range, whether 50 Hz or 60 Hz. 
  • The chargers also accept a 90-400 V DC supply. 
  • Three outputs that each can supply the full output current Three isolated outputs to simultaneously charge 3 battery banks Each output is capable to supply the full rated current. 
  • Three-stage charging, with temperature compensation The Centaur charges at bulk rate until the output has reduced to 70% of the rated Amps, at which a 4 hour timer begins. After the timed period the charger switches to float rate. An internal temperature sensor is used to compensate the charge voltage with – 2 mV/ºC (– 1 mV/ºF) per cell. A DIP switch is available to select the optimum charge/float voltages for Flooded Lead-acid, Gel or AGM batteries

Warranty Info

WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov.

Please contact your dealer for any returns, repairs or support issues related to this product.
Manufacturer : Victron Energy
Manufacturer Part No : CCH024030000
UPC : 8719076021551
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 18034505787

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.0 ★★★★★
Based on 1803 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
S.landia_Librarian
Chelsea, US
★★★★★ 1
Issues with mounting the shelves, big time
Color: Brown, Size: 55.1"W x 10.3"D x 1.8"H, Set of 2
I bought the 55 inches floating shelves. I have an area above my linen cabinet that I wanted to utilize for storage and books in my hall. I did my measuring, figured out spacing. Marked everything off to do 3 total shelves (bought two boxes). A couple of spots screwed into a stud, and the others I had to install the plastic mount things. I had used those before so I just did the predrill then tapped them in, finished off by screwing the mount flush with the wall. I grabbed the first bracket and decide to start with a screw that had one of the inset mount things (sorry the correct term is escaping me). It never once occurred to me to check that the plastic mount and screw would not work. We’ll surprise! I tried and tried to get the screw to screw thru the mount, the mount is the rigid plastic thoe that is supposed to split when the screw goes through. Well something wasn’t engineered properly on the mounts cuz they would not thread a screw. They would not split. I even went into my garage and tried different screws I had to see if maybe it was just too big…or something. Then I started just prying it apart and could not get it to split like it’s supposed to, the tip piece broke off before the piece split. I have never had this situation before. I now have a bunch of these, that leave huge holes in my wall, where I measured out for a shelf to go. I’m not a huge DIYer so now I’m trying to figure out if I can salvage this situation but I’m afraid that if I get different mounts they will be too small for the already created holes, or they will fit the hole but because it’s screwing into dry wall, the drywall already has threads from the other mount, will it strip if the threads aren’t 100% the same. Oooooor am I going to have to patch up and paint that wall, then buy new mounts and attempt to try again….which I will now have to set the shelves at a different height so I don’t screw into the same holes I patched since I don’t trust them…..ugh. I practically want to cry. lol. So if I could give this negative stars I would! I feel stupid due to these having such great reviews by others. Comments of how easy they were to install. I will also mention that a few others mentioned the metal bracket that is mounted to the wall then the shelf slide onto is very flimsy. I could bend it side to side with my hands. The only reason I decided it would be ok is that there are a total of 8 screws in the mount, figured it would be stable enough.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 14, 2025
R
Verified Purchase
Rhonda Emmons
Birmingham, US
★★★★★ 5
Was so easy to put up.
Love it
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 27, 2026
E
Verified Purchase
Eric B
Dallas, US
★★★★★ 4
Decent Quality. Look Great
Color: Brown, Size: 35.7"W x 10.3"D x 1.8"H, Set of 2
These are easy to install and the shelf has a good quality look. The only thing lacking is the quality of the bracket. The arms are thin metal and I feel like it won’t hold much weight.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 4, 2025
B
Verified Purchase
Ben'neel Suhail SR
Fort Morgan, US
★★★★★ 5
Looks good.
Color: Grey, Size: 55.1"W x 10.3"D x 1.8"H, Set of 2
They look good in my den!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 22, 2026
W
Verified Purchase
William Brazell
Bozeman, US
★★★★★ 5
Great quality and easy install
Color: White, Size: 55.1"W x 10.3"D x 1.8"H, Set of 1
Great quality. Very easy install. Mounted mine above my fireplace to create a mantel. Looks like it was there from the day the apartment was built. So far it has held a good bit of weight with heavy ceramic decor and one very fat cat jumping up on it lol.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 22, 2025

recommand products