Pay in installments of $5.14 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Matek F411 Wing Flight ControllerIf you are looking for a tiny fixed wing Inav flight controller the Matek F411 is your ideal choice. This board is the little brother of the popular F405 wing flight controller from Matek making it ideal for aircraft that have less interior room. But just because the F411 is smaller it still packs all of the essential features like multiple 5V BEC's for your servos, and peripherals. This F411 wing board is just 28mm x 41mm in stize making it suitable
If you are looking for a tiny fixed wing Inav flight controller the Matek F411 is your ideal choice. This board is the little brother of the popular F405 wing flight controller from Matek making it ideal for aircraft that have less interior room. But just because the F411 is smaller it still packs all of the essential features like multiple 5V BEC's for your servos, and peripherals. This F411 wing board is just 28mm x 41mm in stize making it suitable for just about any FPV aircraft. You still get a current sensor, BMP280 Barometer, built in OSD, and a 8Khz MPU6000 IMU on this tiny board.
Firmware
- Runs INAV Flight Software
- Target: MATEKF411
Differences between F405 Wing and F411 Wing boards
Not sure on which board to get, the points below will help you make your decision
Things missing from the F411 Wing
- Blackbox Logging
- No 12V BEC for FPV gear
- No RSSI input
- Lower current 5V BEC at 3A (F405 wing has 5A BEC)
- 2 UARTS (F405 wing has 6)
- 1 I2C (F405 wing has 2)
- Smaller current sensor (78A vs 104A)
- Lower current 3.3V BEC at 200mA (F405 wing has 300mA)
Specifications
- MCU: 100MHz STM32F411
- IMU: MPU6000 accelerometer/gyro (SPI)
- Baro: BMP280 (I2C)
- OSD: INAV OSD w/ AT7456E chip
- Blackbox: No
- VCP & 2x UARTs
- 2x Motors, 5x Servos outputs
- 1x I2C
- 3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)
- Built in inverter for SBUS input (UART1-RX)
- PPM: ST1 pad with softserial disabled
- SoftSerial on ST1 pad
- Battery Voltage Sensor: 1:10 (Scale 1100)
- WS2812 Led Strip support: Yes
- Beeper : Yes
- RSSI: No
PDB
- Input voltage range: 6.5~30V (2~6S LiPo) w/TVS protection
- 2x ESC power pads
- Current Senor: 78A, 3.3V ADC, Scale 423
BEC 5V output
- Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeed
- Continuous current: 2 Amps
BEC Vx output
- Designed for Servos
- Voltage adjustable, 5V Default, 6V via jumper
- Continuous current: 3 Amps
BEC 3.3V output
- Designed for Baro / Compass module and Spektrum RX
- Linear Regulator
- Continuous current: 200mA
Physical
- Mounting: 24 x 24mm, Φ4mm with Grommets Φ2mm
- Dimensions: 41 x 28 x 10 mm
- Weight: 7g (Total 12g w/ bottom plate and M2 standoffs)
Included:
- 1x Matek F411 Wing Flight Controller
- M2 standoffs + screws
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.9 ★★★★★
Based on 25 reviews
Sort
Product Reviews
★★★★★ 5
I admit when I was wrong.
Size: Queen - Pack of 2, Style: Medium, Configuration: Pillow
3/29/26 - I took the pillows and put them in my dryer on steam refresh for the default 10 minute cycle.
OMG - they fluffed up and evened out to be soft and comfortable, no lumps whatsoever. If you like a soft pillow with some support, but not firm support, THIS is what you want. I am truly amazed.
==================================================
Previous review---They arrived in a vacuum seal bag. When you cut the bag and they inflate, they inflate lumpy like. Some areas are thick and some have to fill so, not very good. I am going to try washing them and drying them to see if they fluff up better.
Will post the results in a day or two.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 24, 2026
★★★★★ 3
Immediate neck and back pain
Size: Queen - Pack of 2, Style: Medium, Configuration: Pillow
Nice full pillows that holds its shape, BUT was NOT good head and neck support. I noticed an immediate difference. From non existent to growing neck pain in the first night’s use, through the week.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
★★★★★ 5
Soft and comfortable
Size: Queen - Pack of 2, Style: Medium, Configuration: Pillow
These pillows are incredibly soft and comfortable. They provide great support while still feeling plush and cozy. I’ve been sleeping much better since I started using them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 2, 2026
★★★★★ 5
Amazing - Stop Scrolling and Buy This Pillow
Size: Queen (Pack of 1), Color: White
I have been an Amazon customer ever since the very beginning, and this is my first review. Not because I haven’t purchased tons of amazing things (and a few bad ones), just never felt the need.
However, I researched pillows for longer than I care to admit, and decided on this one.
I’ve had it for about six months and absolutely love it. No lie, I genuinely look forward lying my big head on it after a long day.
I am a side sleeper, but flip flop all around through the night and it’s great in every position.
Pros:
Stays nice and cool, which is soothing regardless of the time of year.
Has a sort of quilted textured pattern on the zip up cover, gives it a luxury feel, that breaths nicely even when a pillow case is added.
The fill is fully adjustable to your preference.
I knew it came with extra filling but was worried it would not be enough. Wrong. It was very full and I ended up taking some out until it was perfect.
It comes vacuum sealed and suggests it may take some time to fully take shape. However, I found it to be about 90% almost instantly and was sleeping on it a couple hours later.
There was no unpleasant scent sometimes associated with memory foam items.
The foam itself is very nice, a mix of what appears to be shredded and cotton candy cloud like. Very brilliant idea, as it is somehow supportive, soft and firm all at once.
The affordability of this pillow compared to some of the others in this category can’t be overstated.
Oh, and the packaging was very thoughtfully and securely done.
If you are like me, an over thinker, I would suggest just taking this for a spin. It’s amazing.
I’m not a bot, or working for the company. I’m just truly satisfied, love this pillow, and have been sleeping great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 6, 2026
★★★★★ 5
It's the perfect pillow!
Size: Queen (Pack of 1), Color: White
I purchased this pillow specifically for its customizable fill feature, which allows you to add or remove stuffing to suit your personal comfort needs. Due to the unique curvature of my cervical spine—forward at the neck rather than backward—I require a soft, semi-flat pillow rather than one that is thick or firm. Additionally, I often experience ear discomfort by morning, so a gentler surface is essential.
Upon adjusting the fill, I was pleasantly surprised by the generous amount of stuffing included. There was enough to fill an additional pillowcase, and I estimate it could easily create four to five more pillows. The ability to modify the pillow’s firmness at any time is an outstanding feature that makes it adaptable for a wide range of preferences and sleep styles.
This pillow has exceeded my expectations in both comfort and versatility. I highly recommend it to anyone seeking a personalized sleep experience.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 1, 2026