Pay in installments of $101.83 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 29 - Aug 3
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Manton 3/8" Diameter Series 5 Pushrods (Set of 32) 11-23 Ford 6.7L PowerstrokeThe factory pushrods in your 6. 7 Powerstroke are designed for factory power and boost levels. As power increases, safeguard your engine with upgraded pushrods. And if you're rebuilding your engine, no time like the present for a big upgrade with a set of Manton Pushrods. These are a stock length pushrod, but built from superior materials and thicker walls for increased rigidity. 5 16" STOCK DIAMETER VS. 3 8" DIAMETER: With the allowable window that
The factory pushrods in your 6.7 Powerstroke are designed for factory power and boost levels. As power increases, safeguard your engine with upgraded pushrods. And if you're rebuilding your engine, no time like the present for a big upgrade with a set of Manton Pushrods. These are a stock length pushrod, but built from superior materials and thicker walls for increased rigidity.5/16" STOCK DIAMETER VS. 3/8" DIAMETER:
With the allowable window that Manton had to work with, a 3/8 diameter is the largest diameter pushrod that will drop right in without any modifications. By increasing the diameter of the tubing from the stock 5/16 to 3/8, the load is spread over a larger surface area without causing the pushrods to bind with the port of the cylinder head. This larger diameter pushrod will provide almost twice the loading capacity of a 5/16 diameter before beginning to deflect. Larger diameter is always a better choice when it comes to pushrods.
STAGE 5 PUSHRODS DEFINED:
Manton's Choice: Used in Top Fuel Dragsters which produce 11,000 horsepower. It is the strongest most durable chromoly pushrod ever produced. This pushrod has been engineered to maximize valvetrain stability for more overall power, torque and efficiency in all high performance diesel engines. Whether it is sled pulling, drag racing, dyno competitions, or heavy towing, these will extend valvetrain service life and maximize potential performance of all your other engine components you have invested in. By utilizing 4130/4135 chromoly tubing and proprietary heat treating techniques, Manton is able to achieve a 275,000 p.s.i. tensile strength from the tubing without causing it to become brittle.
WHY A THREE PIECE PUSHROD:
In simple terms, pushrods transfers energy from the lifter to the rockerarm. If a pushrod is not correctly matched to the application, incorrect valve lift and valve timing can cause engine failure. With a properly matched pushrod you will achieve maximum horsepower and ultimate valve train wear.
To achieve the proper pushrod for an engine, you must decide the pushrod length, diameter, wall thickness, materials, heat treating and end configurations to match the specific engine components and application. This may seem like a fairly easy process but to accomplish this there are several things that must be considered. This is why Manton only manufactures custom modular pushrods.
- Each end in a pushrod must be compatible with its mating components. This requires the use of material that can function as a bearing and at the same time be as impact resistant as possible. As an additional benefit, this also allows for an unlimited amount of tip designs.
- With a modular pushrod it allows the flexibility to choose "unique" tapers for clearance issues. Also changing the wall thickness, diameter and tapering the tube will change the natural frequency.
- The column of the pushrod must be made out of a different material and heat treated differently than the tips. It must provide the strength to withstand the combined abuse of high engine speeds and cylinder pressure. By using a dissimilar material from the pushrod end, Manton is able to utilize any heat treat desired. In most applications, Manton uses a material that is commonly available 4130/4135 tubing.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 18 reviews
Sort
Product Reviews
★★★★★ 4
Excellent set at an affordable price
Size: 18-Piece, Style: Traditional Handle Design
I'm not a chef, nor a knife aficionado. My wife and I both enjoy cooking and prepare our meals at least 5 days a week. We had a medium quality knife set that was around 13 years old. Due to improper cleaning (placed in the dishwasher most of the time) the blades dulled and rust spots appeared.
We decided that a high end set might be a nice gift to ourselves, and looked at the premium brands available. Being non-professionals I started to feel uncomfortable spending upwards of $300 on a knife set.
I have been watching these knives for a while now, and have read countless reviews, both good and bad to help me decide if these are worth getting. Having purchased other Amazon Basic items I felt that these were a safe bet, and if I were unhappy I could easily return them.
Upon arrival the knifes looked fantastic. They were very nicely packaged and easy to safely unpack. The block was in perfect condition (some reported cracks upon arrival). I inspected the knives and all appeared to be in perfect condition showing no dings, burrs or warping. After a quick hand wash and dry I placed them all in the block. I did have a slight issue with one of the steak knife slots not fully cleared and preventing the knife from sliding all the way down. I was easily able to clear it using an old steak knife as there was only a wood chip stuck in the slot.
I have used the knives about every day for the past 2 weeks and so far the are great to use. Very comfortable, super sharp and they clean up well. The only issue I have had is the Scissors come apart very easily, I've had them fall apart while using them twice already. I will see about adjusting the tension on the connection, but honestly the scissor is not very important to me and I don't mind replacing them with higher quality kitchen scissors if need be. Overall we are very happy with this purchase and I expect that with proper cleaning these knives will last a very long time.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 2, 2019
★★★★★ 5
Forged Knives at a Stamped-Knife Price
Size: 18-Piece, Style: Traditional Handle Design
Purchased as a gift for a friend suffering with an old, rusted, chipped set of cheap big-box knives.
As far as I can tell, these are one-piece forged/milled knives with a full tang... no idea how Amazon gets them so cheap. I have a set of J.A. Henckels Four-Star that were 5x the price, and these knives are almost as nice in fitment and quality. Some of the grinds at the bolster aren't quite symmetrical, but nothing that functionally affects the knife. Not show-dogs, just old reliable mutts that get you where you need to be.
Knives have a good weight and balance, not too heavy but sit well in the hand and have a nice action. The edge out of the box is only average, and the chef's knife had a decent roll to the edge out of the box. However, they sharpen easily and can take a fine edge with a little work with the steel (no word on edge longevity yet, they don't cook that often).
The shears come apart for cleaning (which is nice), although I found it a little too unstable when opening them wide, the rivet is at 90* so when taking a big bite they have a tendency to come apart rather than scissor. Changing to a design that doesn't separate until they're fully open would make them much better.
The woodblock is pine, and had a distinct pine scent out of the box (I suppose this is an area where they saved money, I would pay a premium to get a bamboo block instead). The exterior was well-finished, but the interiors of the knife slots did have some rough spots and/or splinters from the milling. Nothing that stops it from working as intended, a little back and forth solved the majority of problems.
Friend hand washed them after receiving them, but left them damp. Water spots, but no rust on any of the blades, the steel had light surface rust that came off with a scrubby sponge and soap. Overall I remain optimistic they will stand up to the abuse of a forgetful cook.
Having bought expensive German steel, and now these, I daresay I would probably be unable to tell the difference between the two in the kitchen.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 27, 2015
★★★★★ 5
This is an inexpensive quality knife set!
Size: 18-Piece, Style: Traditional Handle Design, Size: 18-Piece, Style: Traditional Handle Design
I have been a Chef for 17 yrs. and from experience know you don't get quality in an inexpensive knife set. This AmazonBasics Premium set really impressed me. The knives I use and have at home are mixed matched because I like good hefty knives. My wife always rags on me that the knives look crappy, so I got on here and started reading reviews. I was not gonna spend alot of money on a set knowing that I have good knives already. Then I saw this set, and looked at the video.
I got them in TWO days, and when I opened the package I was expecting the block to be split, chipped, or have saw marks. As you can see the one I got was flawless. I then took out the chefs knife and smiled. Easily comparable to a 8" Zwilling JA Henckels Pro Traditional Chefs Knife. It has the same quality, heft, and balance. TRUST ME I KNOW!!!! Beautiful knife. The thickness of the blade is equal to my Victorinox Fibrox Chefs Knife and I paid $45. for that knife alone!!! This here is a quality product at a good price. Treat them with respect and they will last for YEARS. If your looking for a good complete set, a nice wedding gift, of just looking to replace the "crappy" set you have look no further.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2016
★★★★★ 5
Amazing for the price
Size: 9-Piece, Style: Traditional Handle Design
At a higher price they would have been 4 or 3 stars, but for $50 this is an insane deal. The steel is pretty good quality. It almost seems like it's hardened VG-10 but I think they would advertise that if it were so I'm guessing it's a cheaper stainless steel that just comes harder without being treated though I'm just speculating based on price. Anyways they're flat ground, take an edge easily, and hold it reasonably well. Nicer knives would certainly hold an edge longer but I'm pretty happy with them. The flat ground shape of the blade is actually ever so slightly convex as well, it's not too apparent in use but you can certainly see it in the reflection. The serration on the bread knife is the inverse of what I would prefer, rounded metal with points cut into it vs points extending from the blade with the rounded parts cut out. When the rounded parts are cut out it's easy to sharpen. When the points are cut out it's almost impossible to sharpen.
The handles are the downfall of the knives. They're not smoothly finished and while they look alright they feel like a cheaply cut (although very solid) piece of plastic which is exactly what they are. A little bit better finishing on the handles would really improve the knives.
The holding block serves it's purpose well. The sharpener is ok but below average, though the rough steel rod sharpeners just aren't great to begin with. Diamond coated rods are much better, though ceramic rod sharpeners are the best.
Overall I love the knives and I'm glad I bought them. For the price they're the best deal I've ever found, no question. I love that there is no logo on them, but I just don't like to see branding in general even if it's a premium brand. If you're buying this for the bread knife or the sharpener, don't, they're not good. If you want the look and feel of a $300+ knife set, don't buy this, you'll be disappointed. If you want a good quality knife set but aren't willing to spend $300+ then absolutely buy these, they're great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 3, 2016
★★★★★ 5
Really decent knives
Size: 9-Piece, Style: Traditional Handle Design
Nice set of inexpensive knives and comfortable to use
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 23, 2026