J-Hook Circuit Breaker Attachment

J-Hook Circuit Breaker AttachmentFinally! A clean cost efficient way to mount your Circuit Breakers as close to the source as possible. Mounting circuit breakers directly by the battery is safest option. Remember, circuit breakers protect the cable, not the device. To maximize the effectiveness of your circuit breaker you want to minimize the amount of unprotected cable. The J Hook Dual Circuit Breaker Attachment allows you to mount one or two of our premium circuit breakers directly

Finally! A clean cost efficient way to mount your Circuit Breakers as close to the source as possible.

Mounting circuit breakers directly by the battery is safest option. Remember, circuit breakers protect the cable, not the device. To maximize the effectiveness of your circuit breaker you want to minimize the amount of unprotected cable. 

The J-Hook Dual Circuit Breaker Attachment allows you to mount one or two of our premium circuit breakers directly to the front of the battery. This provides the same functionality as our Dual Circuit Breaker Battery Tie-Down without the need to have a special flat top battery. It is a universal solution that will work for all battery styles.

We also include a single replacement J-hook as the factory J-hook on your Toyota is not threaded far enough for this to install. We don't include a 2nd J-Hook because many Toyota vehicles have the rear J-hook permanently attached to their factory tiedown. Also on this product we wanted to keep costs down.

This product is for the J-Hook Circuit Breaker Attachment, 10 inch J-Hook, and mounting hardware.

It does not include the Circuit Breakers, Power/Ground Cables, etc. Click here to purchase your PowerTrays Compact Waterproof Circuit Breakers.

Features

• PEM® Fasteners with Stainless Steel Screws - Pressed into the bottom of the PowerTray, genuine PEM fasteners become a permanent feature of the tray so you never have to worry about losing a nut while adding mods to your rig. Also included is matching stainless steel hardware to mount those accessories to the tray.
  
• 1/8th Inch 5052 Aircraft Aluminum - Possibly a little overkill to use for mounting electrical accessories that tend to weigh in the ounces, not pounds. But with a weight coming in at 3X lighter than steel and corrosion resistance far superior to even stainless steel, aluminum is the clear choice for weathering the harsh conditions we put our vehicles though.
• High Quality Zinc Coated J-Hook  - A single 10 inch Zinc coated 1/4-20 J-Hook will keep your circuit breaker nice and secure on your adventures.
• Laser manufacturing - Guarantees precise cuts with an accuracy of ±0.001", which is why it is used globally in many industries for intricate designs and jobs which require high tolerances.
• Chamfered edges - This is the only step where we cut corners (hehe). To avoid sharp edges we chamfer all jagged edges and corners by hand with a specialized high-speed router bit. So you don't have to worry about cutting your hands or scratching your vehicles paint during installation. Also with a 45° chamfer on the edges you minimize the risk of vibration wearing though the protective sleeving on cables and wires which would short out the circuit.
• Perfect fit -  Don't sacrifice access to your factory components. This mount is designed to not obstruct accessing your factory components like headlights when its installed
• Power Made Easy - Delivered right to your door with step-by-step installation instructions.