Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 15 - Jul 20
For Your Every Summer RSVP, with Code: SUMMER15
Description
Carli Suspension XDK422 Torsion Sway Bar (For 0-4" Lift)The Carli Suspension Torsion Sway Bar CS DTSB3 1419 is designed to enhance the ride quality and control of your lifted Ram 2500 3500 4WD. Like any other spring native to a stock Ram HD, the factory Sway Bar is nearly immobile. Conversely, it's the most neglected spring on the vehicle as people fail to look past the front coils and rear springs when looking to "soften" the factory ride. Well, the factory sway bar is essentially a brace locking the axle
The Carli Suspension Torsion Sway Bar CS-DTSB3-1419 is designed to enhance the ride quality and control of your lifted Ram 2500/3500 4WD. Like any other spring native to a stock Ram HD, the factory Sway Bar is nearly immobile. Conversely, it's the most neglected spring on the vehicle as people fail to look past the front coils and rear springs when looking to "soften" the factory ride. Well, the factory sway bar is essentially a brace locking the axle to the frame. What does this mean? What you hit with one tire is immediately transferred to the other tire and into the frame causing a high frequency reverberation/chatter felt in the cab.
So where does the factory sway bar come in? These trucks are heavy. Even with radius arms (much better for sway control than a 4-Link), a bit of supporting spring rate plays a substantial role in keeping the body roll in check and suspension composed. The Factory sway bar is set up to load the truck to its MAX legal weight and haul it safely - for this application, there's no better bar.
For everyone that's not loaded to the GVWR daily, the Carli Torsion Sway Bar provides the final link lighting the last spring on the truck maximizing the ride quality of the RAM HD Platform. Keeping your factory bar limits comfort, removing it completely makes for questionable control when hauling or emergency maneuvering. After several revisions and years in development, the Carli Torsion Sway Bar Splits the difference perfectly allowing a small amount of differentiation side to side before progressively engaging to add the needed control as leverage is applied. Rip corners in the dirt with surgical precision knowing there's exactly enough rate to hold the body steady while cutting your line through the dirt. Hit the tarmac and enjoy the benefit of the lighter rate bar cruising around town with its on-road feel reminiscent of an independent front suspension - no more chassis reverberation on small bumps and let the suspension dance in the level cab while hitting off-camber driveways.
The arms are constructed of doubled and welded 3/8" cold-rolled steel - 3/4" thick at clamp area. The arms are locked to the bar by Carli's in-house machined 17-4 stainless preload washers and Grade 8 pinch Bolts. The bar itself is a custom rate, heat treated torsion bar passing through fabricated brackets that house the extreme duty, service free bushings. Finishing off the assembly are Sway Bar End Links featuring legendary FK Bearing 5/8" Heat-Treated, Chromoly Race Heims. This bar is designed to work with lift systems up to 4". In typical Carli fashion, there are no disconnects on the end links nor multiple holes in the bar to change the leverage applied. This bar is refined to work in conjunction with Carli custom tuned suspensions to throw an exponent on the ride quality. The rate is set, the bar will not hinder articulation justifying a disconnect.
So where does the factory sway bar come in? These trucks are heavy. Even with radius arms (much better for sway control than a 4-Link), a bit of supporting spring rate plays a substantial role in keeping the body roll in check and suspension composed. The Factory sway bar is set up to load the truck to its MAX legal weight and haul it safely - for this application, there's no better bar.
For everyone that's not loaded to the GVWR daily, the Carli Torsion Sway Bar provides the final link lighting the last spring on the truck maximizing the ride quality of the RAM HD Platform. Keeping your factory bar limits comfort, removing it completely makes for questionable control when hauling or emergency maneuvering. After several revisions and years in development, the Carli Torsion Sway Bar Splits the difference perfectly allowing a small amount of differentiation side to side before progressively engaging to add the needed control as leverage is applied. Rip corners in the dirt with surgical precision knowing there's exactly enough rate to hold the body steady while cutting your line through the dirt. Hit the tarmac and enjoy the benefit of the lighter rate bar cruising around town with its on-road feel reminiscent of an independent front suspension - no more chassis reverberation on small bumps and let the suspension dance in the level cab while hitting off-camber driveways.
The arms are constructed of doubled and welded 3/8" cold-rolled steel - 3/4" thick at clamp area. The arms are locked to the bar by Carli's in-house machined 17-4 stainless preload washers and Grade 8 pinch Bolts. The bar itself is a custom rate, heat treated torsion bar passing through fabricated brackets that house the extreme duty, service free bushings. Finishing off the assembly are Sway Bar End Links featuring legendary FK Bearing 5/8" Heat-Treated, Chromoly Race Heims. This bar is designed to work with lift systems up to 4". In typical Carli fashion, there are no disconnects on the end links nor multiple holes in the bar to change the leverage applied. This bar is refined to work in conjunction with Carli custom tuned suspensions to throw an exponent on the ride quality. The rate is set, the bar will not hinder articulation justifying a disconnect.
Parts Included: CS-DTSBBRKT3-1419; CS-DTSBKIT
Features:
- Compatible With 0"-4" Front Lift
- Easily The Best Bang For The Buck Upgrade For Ride Quality
- Allows Front Suspension To Move Freely Without Giving Up Control
- Torsion Bar May Be Black Or Silver Zinc; Depends On Supply-Chain Availability (Not Requestable)
Note:
Requires Removal Of Electronic Sway Bar On Power Wagons
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.0 ★★★★★
Based on 43 reviews
Sort
Product Reviews
★★★★★ 5
Adequate sponge organizer
Color: Black, Color: Black
This is a black matte metal sponge organizer. It does have a tilted drip tray so the water drips down into your sink. The metal is cheap but effective. For the price, the added organization you get from this item is worth it! Could also be used in a bathroom. There is no mounting hardware included, not even adhesives.
The metal is already warped out of the box. This is not a high quality item, but the price is fair!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 23, 2026
★★★★★ 5
Great dish soap, cloth and scrubbies organizer!
Color: Black, Size: with Dishcloth Holder, Color: Black, Size: with Dishcloth Holder
I love the fact that it holds all my tools for the dishes. It helps to keep the area tidy.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
★★★★★ 5
Great organizational tool!
Color: Silver, Size: with Dishcloth Holder
Looks nice and keeps everything in it's place!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 7, 2026
★★★★★ 4
sturdy and they work well
Color: Black, Size: with Dishcloth Holder
my husband been complaining we need something in there to put sponges, etc. in and I’ve agreed with him for two or three years now we bought some different things and none of them really worked. They weren’t what I wanted.
I saw this and bought it and it’s definitely worth the money. It looks great. It’s easy to install sturdy. It’s going to drain easily and it has one of the top little baskets that you can move to wherever you want it I couldn’t ask for anything better this is going to be definitely what we wanted.
I just tried other things that go over the faucet and things like that and they did not look right and they were flimsy so before you buy one of those check this out first if you have enough room by
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 22, 2025
★★★★★ 5
Where has this been all my life. Fits a lot. Doesn’t get gross.
Color: Black, Size: with Dishcloth Holder
I don’t know where this thing has been all my life. Over the years I’ve tried so many ways to keep all the dishwashing stuff organized and not dripping on the counter or getting lost in the sink. Every holder I had before would catch water and end up gross. This one actually works. It fits perfectly on the back ledge of my sink, and I love the little spout that angles into the sink. It’s just big enough to clear the edge but small enough that it’s not in the way. The rack for hanging our blue scrubby is my favorite part. There is never a great place for that thing. The rack does come unhooked easily, including if we bump it, but was easily fixed by taking some pliers and just tightening where it clamps on a bit. It holds more than I expected. The bottom is angled so water drains right out through the spout instead of pooling. It’s very nice quality - does not feel cheap. Honestly, I love it more than I thought I would.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 12, 2025