Pay in installments of $169.38 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 30 - Aug 4
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Oil Separator for BMW 1, 3 & 5 - 402302Vehicle Fitment & Part Details The Oil Separator is listed for the BMW 1 (2004 2011). Confirm compatibility by matching the listed fitment details. Verify VIN engine. Key Details SKU 402302 Component Oil Separator Primary Fitment BMW 1 (2004 2011) Vehicle Fitment Includes 18 supplied applications covering BMW. Use the full table below to confirm model, chassis, year range, engine and power before ordering. View Full Vehicle Fitment (18 applications)
Vehicle Fitment & Part Details
The Oil Separator is listed for the BMW 1 (2004-2011). Confirm compatibility by matching the listed fitment details. Verify VIN/engine.
Key Details
- SKU
- 402302
- Component
- Oil Separator
- Primary Fitment
- BMW 1 (2004-2011)
Vehicle Fitment
Includes 18 supplied applications covering BMW. Use the full table below to confirm model, chassis, year range, engine and power before ordering.
View Full Vehicle Fitment (18 applications)
| Make | Model | Chassis | Years | Engine | Power |
|---|---|---|---|---|---|
| BMW | 1 | E87 | 2004-2011 | 130 i N52 B30 A; N52 B30 AF; N52 B30 BF | 195 kW / 265 HP |
| BMW | 3 | E90 | 2004-2011 | 323 i N52 B25 A; N52 B25 B; N52 B25 BE; N52 B25 BF | 130 kW / 177 HP |
| BMW | 3 | E90 | 2004-2011 | 325 i N52 B25 A; N52 B25 B; N52 B25 BF | 160 kW / 218 HP |
| BMW | 3 | E90 | 2004-2011 | 330 i N52 B30 A; N52 B30 BF | 190 kW / 258 HP |
| BMW | 3 Touring | E91 | 2004-2012 | 323 i N52 B25 A | 130 kW / 177 HP |
| BMW | 3 Touring | E91 | 2004-2012 | 323 i N52 B25 A | 140 kW / 190 HP |
| BMW | 3 Touring | E91 | 2004-2012 | 325 i N52 B25 A | 160 kW / 218 HP |
| BMW | 3 Touring | E91 | 2004-2012 | 330 i N52 B30 A | 190 kW / 258 HP |
| BMW | 5 | E60 | 2001-2010 | 523 i N52 B25 A; N52 B25 B; N52 B25 BE | 130 kW / 177 HP |
| BMW | 5 | E60 | 2001-2010 | 525 i N52 B25 A; N52 B25 B; N52 B25 BF | 160 kW / 218 HP |
| BMW | 5 | E60 | 2001-2010 | 525 xi N52 B25 A | 160 kW / 218 HP |
| BMW | 5 | E60 | 2001-2010 | 530 i N52 B30 A; N52 B30 BF | 190 kW / 258 HP |
| BMW | 5 Touring | E61 | 2004-2010 | 523 i N52 B25 A; N52 B25 B; N52 B25 BE | 130 kW / 177 HP |
| BMW | 5 Touring | E61 | 2004-2010 | 525 i N52 B25 A; N52 B25 B; N52 B25 BF | 160 kW / 218 HP |
| BMW | 5 Touring | E61 | 2004-2010 | 530 i N52 B30 A; N52 B30 BF | 190 kW / 258 HP |
| BMW | Z4 Coupe | E86 | 2006-2008 | 3.0 si N52 B30 A; N52 B30 BF | 195 kW / 265 HP |
| BMW | Z4 Roadster | E85 | 2002-2009 | 2.5 si N52 B25 A | 160 kW / 218 HP |
| BMW | Z4 Roadster | E85 | 2002-2009 | 3.0 si N52 B30 A; N52 B30 BF | 195 kW / 265 HP |
Fitment Notes
- Always match vehicle details before ordering. Verify VIN/engine.
Compatibility Verification Notes
- Confirm compatibility using VIN, engine code, chassis / platform, OE reference and original part comparison before ordering.
- Match the supplied fitment details to your vehicle, including model, year range and any listed engine or chassis information.
- Fitment data may vary by production date, market, import history and engine variant.
- This listing is for part identification and compatibility checking only. Installation must be carried out according to the vehicle manufacturer's service information by a suitably qualified person.
Common Questions
Will the Oil Separator fit my BMW 1?
This part (402302) is listed for the fitments shown on this page. Confirm by matching the fitment details. Verify VIN/engine.
How do I confirm fitment if there are multiple variants?
Compare the supplied fitment details, original part details and any listed variant information before ordering. Verify VIN/engine.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.4 ★★★★★
Based on 27 reviews
Sort
Product Reviews
★★★★★ 5
Superior Design!
Size: 6 Pairs / 12 pcs
Delivery was lightning fast.
I tried a pack of two pairs of these banana jacks as a sample to see if these would meet my needs. The design of these plugs is superior. The design was exactly what I wanted because the speaker wire is secured with TWO set screws. Then I ordered an additional six pairs of plugs to hook up my subwoofer to my amp and speakers.
(I feed the audio output from the amp to the sub. The sub has a crossover that keeps the low frequencies and sends the mid and treble frequencies to my bookshelf speakers.)
I love the security of two set screws on each plug and love the barrel that screws on AFTER the wire is secured by the set screws. Most banana plugs have a hole through the shaft of the plug that receives the stripped wire. Then the barrel cover is screwed down to secure the wire in the plug. This design compresses the speaker wire but eventually the cap loses it grip and allows the connection between the wire and the plug to become loose. Then the transfer of the audio signal becomes poor and the speakers sound bad. Every month or two I needed to check all the banana plugs and re-tighten many of them for the best performance. The two set screws eliminate this problem. The set screws are quite small and take a little extra care in installation. You will need a small flat blade screwdriver to tighten them. I used the 1/8" flat blade driver from a set of jewelers screwdrivers.
These well made plugs are a bit pricier that many of the banana plugs available but certainly not the priciest plugs available. For me, the slightly higher price was more than offset by the security of the wire within the plug.
I'm not thrilled with the extra tight fit of the tip on the plugs into the jacks. It took a lot of effort to insert the in the jack. Actually I "greased" the pins (very sparingly) with with non-corrosion, conductive paste (Ox-Gard, No-Corrode, etc. Do NOT use any other grease.) Next time I'll use pliers to compress the pin.
My only quibbles are that the spring pins that go into the jack are very tight and that the plugs are only sold in quantities of two pairs or 12 pairs.
I recommend these banana plugs for all who are using the banana plugs and jacks for hooking up your speakers. It's a very convenient way of connecting speakers if your speakers and amplifier have the banana jack as part of the binding post. Further, it's much safer to use banana plugs since the possibility of shorting your amplifier with a stray strand of wire is practically zero. Easy Five Stars.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 13, 2018
★★★★★ 5
Top banana
Size: 5 Pairs / 10 pcs
Theses banana plugs are hight quality non magnetic. Banana plugs easy to usexand very high quality sound different because of the better connection and quality.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
★★★★★ 5
Very easy to use
Size: 12 Pairs / 24 pcs
I have an Onkyo audio/video receiver along with an Emotiva amplifier. Both have speaker "post" terminals which will accept banana plugs, OR I can connect the speaker wires by unscrewing the posts, poke the speaker wires into the terminals and then tighten the posts. The problem with poking the wires into the terminals and tightening the posts vs using banana plugs is that there is a risk of the wires touching the metal on the back of the chassis or touching other speaker wires, causing a short if one is not careful. With banana plugs, they simply plug into the back/top of the posts, eliminating the rsick of a short circuit. They can also be unplugged very easily if needed. Banana plugs are DEFINITELY the preferred way to connect speakers to an receiver or amplifier if they have post-style terminals.
These particular banana plugs came in a package of 12 I believe. They were very reasonably priced, and simple to connect to the end of the speaker wires. Simply unscrew the banana plugs, use a small, standard jewelry screwdriver and loosen both of the set screws, insert the speaker wire, then tighten the set screws, and then screw the banana plug back together.
The plugs have either a red band which would typically be used for your "Right" speakers, or a black band which would typically be used for the "left" speakers. The banana plugs insert into the top or front of the speaker terminal posts on the amp and receiver. They fit VERY snug, and so I did have to apply just a little bit of pressure in order to insert them into the posts, but once plugged in, rest assured they're not going anywhere. They are snug.
I highly recommend these.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 2, 2025
★★★★★ 5
Heavy-Duty 4 AWG Cable With Flexible Insulation
Size: 10ft, Color: 4awg
I am satisfied with this 4 AWG cable. The insulation coating is soft, and the cable itself is very pliable, making it easy to bend and route into the configuration needed for installation. Despite the flexibility, it still feels like a heavy-duty cable designed to handle demanding applications.
I am using this cable to provide the necessary amperage to start the generator on my trailer, and it performs as expected. I also like that the wire gauge and cable properties are clearly printed along the side of the insulation, making identification easy during installation or future maintenance.
The cable arrived in good condition with no obvious odor from the insulation or packaging. Overall, this appears to be a quality heavy-duty cable that is flexible, easy to work with, and suitable for high-current applications.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
★★★★★ 5
True copper battery cables that are high quality
Size: 10ft, Color: 4awg
I love having heavy duty cable on hand for my cars. It's so nice to be able to make your own starter and alternator cables when restoring cars.
These cables are 100% copper, not CCA (copper clad aluminum) like many others are. Copper is far superior for conductivity and handling higher loads.
The rubber on the cable is thick and yet very flexible..it's clearly marked and seems very durable. I like to use a hydraulic crimping tool and then add marine grade heat shrink tubing with the adhesive inside of it to keep it as weatherproof as possible.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026