SKU: 57945062162

2002-05 Buick Rendezvous w/ 3.4L V6 Quick Fix Fuel Hose Kit Stainless QFF0025SS

$114.67 $127.41
Save 10%
No.2 Bestseller on ateurope.org >

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 11 - Jul 16

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

2002-05 Buick Rendezvous w/ 3.4L V6 Quick Fix Fuel Hose Kit Stainless QFF0025SSOverview: Quick Fix Fuel Hose Kit for 02 05 Buick Rendezvous Pontiac Aztek with V6; Braided Stainless QFF0025SS. Our Quick Fix Fuel Line Kits comes with everything needed to replace your leaky fuel lines. They are Pre Cut to the exact length for your vehicle. Unlike the original fuel lines that use hard steel lines and rubber hose, our Quick Fix Fuel Line Kits use a braided stainless steel fuel line that will connect to your fuel tank (or drop hoses)

Overview:

Quick Fix Fuel Hose Kit for 02-05 Buick Rendezvous / Pontiac Aztek with V6; Braided Stainless - QFF0025SS. Our Quick-Fix Fuel Line Kits comes with everything needed to replace your leaky fuel lines. They are Pre-Cut to the exact length for your vehicle. Unlike the original fuel lines that use hard steel lines and rubber hose, our Quick-Fix Fuel Line Kits use a braided stainless steel fuel line that will connect to your fuel tank (or drop hoses) and run all the way up to the fuel rail.

All of the factory clamp locations are used to secure the fuel hose but you must simply remove the factory clips and use the supplied steel clips and fasteners in its place.

No more fighting the hard lines to try and get them installed, our Quick-Fix Fuel Line Kits install is a breeze. Don't let a repair shop patch your old lines with nylon hose that can easily crush when making tight bends, causing possible fuel starvation.

These Quick Fix Fuel Lines are PTFE with a Braided Stainless Steel outside to help protect the lines from road debris, weather, and other causes of wear and tear!

Details:

  • Applications:
    • 2002-2005 Buick Rendezvous
    • 2002-2005 Pontiac Aztek
  • Fuel Type: Gas 
  • Engine: 3.4L V6
  • Material: Stainless Steel
  • Quick Fix Fuel Line Kit
  • NOTE: This kit requires the use of the male-male fuel filter for the 02-05 Rendezvous/Aztek, the 2002-2005 Buick Rendezvous/Pontiac Aztek may have come with a female-male fuel filter. The female-male will NOT work with this kit! Below is a list of part numbers of Fuel Filters that are confirm to work with this kit!


Kit Contents:

  • 1x Main Fuel Hose (3/8 inch Diameter)
  • 1x Return Fuel Hose (5/16 inch Diameter)
  • 1x Vapor Fuel Hose (5/16 inch Diameter)
  • 5x Cushioned Tube Clamps
  • 5x Stainless Steel Bolts
  • 5x Stainless Steel Nuts


Fuel Filter Part Numbers:

  • FF898DL
  • 33689
  • F65617
  • 86689


Interchange:

  • OEM - 10332842
  • OEM - 19418662
  • OEM - 19418663
  • 819-001
Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 57945062162

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.9 ★★★★★
Based on 99 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
C
Verified Purchase
CLEVEinCR
Bozeman, US
★★★★★ 5
Great stuff
Seemed to work as well as or better than some more expensive catalytic converter cleaners. I put it in while at 1/3 tank and my Check Engine light went out almost immediately once I started driving. My Tundra has almost 230,000 miles and still runs great but was getting a little harder to start after I switched from full synthetic oil to conventional. I’ll never do that again and immediately switched back but the damage was done. Check engine light came on and I had to crank longer to get it started. Adding this Liquid Moly fixed both issues temporarily. I have to wonder if this was used regularly, say every 3 months, if it would clean the catalytic converter more permanently?
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 29, 2025
J
Verified Purchase
Jon.
Massapequa, US
★★★★★ 3
Ehh??
Didn't work for my on my 17 hyundai accent with 90k on it. I poured the whole bottle in with a half tank of gas. And went for a 3 day italian tune up.... no dice.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 8, 2026
J
Verified Purchase
Juan Gonzalez
Grantham, US
★★★★★ 5
Works great
Follow instructions and it will work. Had a p420 code, caught it early used this. No more code and passed emissions
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026
A
Verified Purchase
A regular Joe
Chelsea, US
★★★★★ 5
Nice Filter Wrench for my Volvo V70XC!
Size: 86mm x 16
I was needing a filter wrench for my 2001 Volvo V70XC and couldn't find anything that fit from the local auto parts stores. Not knowing what to expect, I took a chance on this one since most of the reviews were 5 star and the price was exceptional. When I received it, I was quite pleased with the construction and finish. I have a brand new oil filter housing for my Volvo (since the one currently on my car is chewed up from the former owner using slip-jaw pliers or something on it) and the fit is perfect! I have worked as a mechanic my whole life (aircraft & automotive), and spent a couple of years as a technician at an automotive dealership and I can say that the tool looks like it is designed for heavy-duty use. The stamped steel housing is thicker than those found in local auto parts stores and the drive adapter has a thick arc welded bead along the inside of the tool. So, it appears to be made to hold up to some fairly heavy torque. Although the product description states that it is 1/2", the drive adapter is actually made for direct attachment to a 3/8" drive. Perhaps this error stems from the fact that they offer a much larger wrench (118-131mm) and this is a more accurate description of their other offerings. The 3/8" drive adapter works perfectly and a 21mm socket fits nicely on the external hex. Fits with SAE sizes are a mixed bag, though. I was able to attach a 13/16" 12-pt. box-end wrench, but not the opposing open-end. A similarly sized 13/16" 6-pt. socket was extremely tight, so I wouldn't recommend this size and would just go with the 21mm if you had to use the external hex. Otherwise, just use the 3/8" drive adapter for easiest use of this tool. The adapter also incorporates ball detents on all four sides of the internal 3/8" drive, so your ratchet or extension won't easily fall off while in use. Since this tool is made for oil filter removal & installation, I'm sure that it will deliver as promised. I'll post an update after my next oil change and I get a chance to use it and install the new filter housing I have.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 25, 2014
C
Verified Purchase
Charles Szatkowski
Waukegan, US
★★★★★ 5
Makes the job easy
Size: 88.5mm x 16
Worked well for removing and installing the oil filter housing.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 17, 2026

recommand products

Campus Stamp for Seasonal Camps Notebook - SKG
33.00
Luggage Tag (TT, TD, CH, AIP) - MLS
14.40
T-shirt (1-6 years) - KNT
80.00
Staff T-shirt - PFL
53.00
Backpack - Medium (CH) - MLS
24.00