DMD Remote 2 Handlebar Controller (Standard)

DMD Remote 2 Handlebar Controller (Standard)The DMD Remote 2 With a 360 joystick! The original black button model. Full 360 degree map panning with multi sensitivity, its the most accurate and precise remote for the DMD2 map. Thinner and shorter model 5 levels of sensitivity Full 360 degree map panning (only by cable connection) Both Bluetooth and Cable connections available Injected plastic chassis Full unique design of electronics and chassis 100% Water proof Dust proof buttons Can be

The DMD Remote 2 – With a 360 joystick! The original black button model.

Full 360 degree map panning with multi sensitivity, its the most accurate and precise remote for the DMD2 map.

• Thinner and shorter model
• 5 levels of sensitivity
• Full 360 degree map panning (only by cable connection)
• Both Bluetooth and Cable connections available
• Injected plastic chassis
• Full unique design of electronics and chassis
• 100% Water-proof
• Dust-proof buttons

Can be connected by Bluetooth or Cable (cable connection is compatible with all DMD Devices). Cable connection is easy, straight into the DMD 12V wiring harness. No extra power supplies required.

Includes cable with M12 connector to convert from our connector to open wires for motorcycle 12V connection.

Note for the DMD-T665:

The optional splitter cable is required if you want the Remote 2 to receive power and send data through the DMD-T665 harness. You can purchase it here.

If you're powering the DMD-T665 using the waterproof USB cable, the splitter can also be used to power the Remote 2. However, please note that a direct wired data connection between the two devices is not supported in this setup—the Remote 2 will need to connect via Bluetooth.

SPLITTER CABLE IS ONLY FOR THE DMD-T665

Compatible with most navigations apps like DMD2, OSMAnd, LOCUS, Google Maps, Waze, GURU Maps, GAIA GPS, Kurviger and more.

See the video below for a quick rundown on DMD and how the Remote 2 can be used…