Pay in installments of $583.12 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 22 - Jul 27
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Carrier Comfort™ 5 Ton R454B, Package RTU Gas Heat/Elec Cool, Single Stage, 115k BTU, Low NOx, 460/3Single Packaged Products with Energy Saving Features and R 454B Puron Advance refrigerant. 13. 4 SEER2 11. 05 EER2 81. 0% AFUE ECM Motor Standard Direct Spark Ignition Low Sound Levels Dehumidification Feature Dense Wire Condenser Coil Guard Standard Cabinet air leakage of 2. 0% or less at . 5 in. W. C. when tested in accordance with ASHRAE standard 193. Refrigerant leak detection dissipation system for added safety Maximum allowed elevation is 10,000
Single-Packaged Products with Energy-Saving Features and R-454B Puron Advance™ refrigerant.
• 13.4 SEER2
• 11.05 EER2
• 81.0% AFUE
• ECM Motor-Standard
• Direct Spark Ignition
• Low Sound Levels
• Dehumidification Feature
• Dense Wire Condenser Coil Guard-Standard
• Cabinet air leakage of 2.0% or less at .5 in. W.C. when tested in accordance with ASHRAE standard 193.
• Refrigerant leak detection dissipation system for added safety
• Maximum allowed elevation is 10,000 ft (3,048m) above sea level
Features/Benefits
Features/Benefits
One-piece heating and cooling units with low sound levels, easy installation, low maintenance, and dependable performance.
Puron Advance is Carrier's latest choice of Refrigerant to help meet the 2025 GWP requirement. This unit is designed and tested with Puron Advance and contains a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained, combination gas heating/electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard and optional heating/ cooling size combinations with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging.
Convertible duct configuration
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes two horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when the room thermostat calls for heating. Standard units are furnished with natural gas controls. A low-cost field installed kit for propane conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which provides for clean and efficient combustion. The large monoport on the inshot (or injection type) burners seldom, if ever, requires cleaning. All gas furnace components are accessible in one compartment.
Turbo-tubular™ heat exchangers are constructed of stainless steel for corrosion resistance and optimum heat transfer for improved efficiency. The tubular design permits hot gases to make multiple passes across the path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 40°F (4.4°C) outdoor temperature. Motormaster® II low ambient kit is available as a field-installed accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate thermostat without anti-short cycle protection is used the Time Guard II field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with non-ozone depleting and low global warming potential Puron Advance (R-454B) refrigerant charge. Refrigerant service connections make checking operating pressures easier. Factory-installed leak detection dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Indoor and Outdoor coils are computer-designed for optimum heat transfer and efficiency. The indoor coil is fabricated from aluminum tube and aluminum fins and is located inside the unit for protection against damage. The outdoor coil is internally mounted on the top tier of the unit.
Low sound ratings ensure a quiet indoor and outdoor environment with sound ratings as low as 69.0 dBA.
Easy to service cabinets provide easy 3-panel accessibility to serviceable components during maintenance and installation. The basepan with integrated drain pan provides easy ground level installation with mounting pad. A nesting feature ensures a positive basepan to roof curb seal when the unit is roof mounted. A convenient 3/4-in. (19.05 mm) wide perimeter flange makes frame mounting on a rooftop easy.
Standard horizontal metal duct covers with insulation come with the unit \and cover the horizontal duct openings. These can be left in place if the units are converted to downflow.
Standard horizontal metal duct covers with insulation come with the unit \and cover the horizontal duct openings. These can be left in place if the units are converted to downflow.
Integrated Gas Control (IGC) board provides safe and efficient control of heating and simplifies trouble-shooting through its built-in diagnostic function.
Cabinets are constructed of heavyduty, phosphated, zinc-coated prepainted steel capable of withstanding 500 hours in salt spray. Interior surfaces of the evaporator/heat exchanger compartment are insulated with cleanable semi-rigid insulation board, which keeps the conditioned air from being affected by the outdoor ambient temperature and provides improved indoor air quality. (Conforms to American Society of Heating, Refrigeration and Air Conditioning Engineers 62.2.) The sloped drain pan minimizes standing water in the drain. An external drain is provided.
Limited Warranty*
• Default 5-year parts limited warranty
- 10-year parts limited warranty with timely registration. Equipment must be registered within 90 days of original installation, except in jurisdictions where warranty benefits cannot be conditioned on registration.
* Applies to original purchaser/homeowner and 5 years to subsequent owners.
• Default 5-year on compressor limited warranty
-10-year on compressor limited warranty with timely registration. Equipment must be registered within 90 days of original installation, except in jurisdictions where warranty benefits cannot be conditioned on registration.
* Applies to original purchaser/homeowner and 5 years to subsequent owners.
• Default 20-year stainless steel heat exchanger limited warranty
- Life stainless steel limited warranty with timely registration. Equipment must be registered within 90 days of original installation, except in jurisdictions where warranty benefits cannot be conditioned on registration.
* Applies to original purchaser/homeowner and 5 years to subsequent owners. See warranty certificate for complete details and restrictions.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 13 reviews
Sort
Product Reviews
★★★★★ 5
My Dog Is Obsessed — Long-Lasting and Worth Every Penny
The Benebone Wishbone is hands-down one of my dog’s favorite chew toys. He cannot get enough of it. The real chicken flavor keeps him interested, and the wishbone shape gives him a solid grip from any angle.
What stands out is the durability. My dog is a strong chewer, and this thing holds up far better than most toys on the market. No soft spots, no chunks breaking off, and no mess—just a tough, long-lasting chew that keeps him busy.
Made in the USA is a bonus, and the medium size works great for a wide range of breeds. If you’ve got an aggressive chewer or a dog who goes nuts for flavored bones, this one is absolutely worth having in the rotation.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 24, 2025
★★★★★ 4
Great dog chew lasts a while, enjoyed by most every dog
These bones are great for a few small, yet significant reasons. Bottom line up front: They're great and a dog owner would be well served to pick up one or two of these as a long term chew toy your dog is almost sure to love.
1) The first being the odd shape of the bones. The shape enables the dog to pick up the bones with ease rather than some of the more flat bones or chews which can lead to a struggle and frustration. The three prongs and the elevated middle portion alleviate this concern.
2) These bones aren't ground material shaped into a bone shape, they are tough, plastic-like substances. They have a very subtle aroma of the flavor they are supposed to be (bacon, chicken, etc) but are completely safe for the dogs to munch on. The best part of the bones being this substance is that they last quite a long time.
3) The bones are lightweight and won't hurt you if you stub your toe as you walk around the house barefoot.
4) Dogs seem to love them. Only the most picky or reclusive dogs will ignore these bones.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 30, 2015
★★★★★ 5
Good size, lasts a long time
Dog likes these. She has her moments when this is only chew toy she wants, and spends days gnawing on it. She likes these bacon and chicken flavors. I like the fact that there is no squeak. This is a good size for full size Aussie, and I also like that she doesn’t “throw” these at me, she lays on the couch or floor and chews. They help to keep her teeth clean from plaque and tartar, so to me they are very functional. This is 4th or 5th buy again, so I wouldn’t buy again if she didn’t like. It does take a while for her to chew to point of needing new, since I keep variety of chew toys for her.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 18, 2026
★★★★★ 5
Great chew
My pup’s favorite, great quality and it doesn’t give him a tummy ache. Lasts a good while and keeps him occupied.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 29, 2026
★★★★★ 5
Awesome!
**update: we have had this toy for over a year! I have found one other con. Once chewed if you step on it you will immediately drop to the floor in agonizing all encompassing pain or (my personal favorite) say every dirty curse word you have ever heard while clutching your destroyed instep. BUT even though this chewed bone is the demon child of a LEGO and a race car to step on my dogs still love it, still chew it and we haven’t had to replace it yet!
I have an insane chewer where toys usually last us less than 24 hours. It has become almost impossible for us to keep up with toys because of how expensive it has become. This toy is not only insanely durable but she has not left it alone for the 3 days we’ve had it.
I was concerned that being “chicken flavored” would mean stinky or sticky and I was very pleasantly surprised that it was neither! It doesn’t leave a stain once chewed, it doesn’t smell, and it doesn’t have a weird coating on it.
The only con so far is that due to it being so durable and hard it makes a loud noise when dropped on the tile or hardwood which made her nervous toward it at first but now that she’s started working on it she could care less about the noise. Super happy with this purchase and will 100% buy more in various sizes for our other pups.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 26, 2023