Pay in installments of $587.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 19 - Jul 24
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Carrier Comfort™ 5 Ton R454B, Package RTU Gas Heat/Elec Cool, Single Stage, 130k BTU, Low NOx, 208/3Single Packaged Products with Energy Saving Features and R 454B Puron Advance refrigerant. 13. 4 SEER2 11. 05 EER2 81. 0% AFUE ECM Motor Standard Direct Spark Ignition Low Sound Levels Dehumidification Feature Dense Wire Condenser Coil Guard Standard Cabinet air leakage of 2. 0% or less at . 5 in. W. C. when tested in accordance with ASHRAE standard 193. Refrigerant leak detection dissipation system for added safety Maximum allowed elevation is 10,000
Single-Packaged Products with Energy-Saving Features and R-454B Puron Advance™ refrigerant.
• 13.4 SEER2
• 11.05 EER2
• 81.0% AFUE
• ECM Motor-Standard
• Direct Spark Ignition
• Low Sound Levels
• Dehumidification Feature
• Dense Wire Condenser Coil Guard-Standard
• Cabinet air leakage of 2.0% or less at .5 in. W.C. when tested in accordance with ASHRAE standard 193.
• Refrigerant leak detection dissipation system for added safety
• Maximum allowed elevation is 10,000 ft (3,048m) above sea level
Features/Benefits
Features/Benefits
One-piece heating and cooling units with low sound levels, easy installation, low maintenance, and dependable performance.
Puron Advance is Carrier's latest choice of Refrigerant to help meet the 2025 GWP requirement. This unit is designed and tested with Puron Advance and contains a dissipation system.
Easy Installation
Factory-assembled package is a compact, fully self-contained, combination gas heating/electric cooling unit that is prewired, pre-piped, and pre-charged for minimum installation expense. These units are available in a variety of standard and optional heating/ cooling size combinations with voltage options to meet residential and light commercial requirements. Units are lightweight and install easily on a rooftop or at ground level. The high tech composite base eliminates rust problems associated with ground level applications.
Innovative Unit Base Design
On the inside a high-tech composite material will not rust and incorporates a sloped drain pan which improves drainage and helps inhibit mold, algae and bacterial growth. On the outside metal base rails provide added stability as well as easier handling and rigging.
Convertible duct configuration
Convertible duct configuration
Unit is designed for use in either downflow or horizontal applications. Each unit is converted from horizontal to downflow and includes two horizontal duct covers. Downflow operation is provided in the field to allow vertical ductwork connections. The basepan seals on the bottom openings to ensure a positive seal in the vertical airflow mode.
Efficient operation High-efficiency design offers SEER2 (Seasonal Energy Efficiency Ratios) of 13.4, 11.05 EER2, and AFUE (Annual Fuel Utilization Efficiency) ratings of 81.0%.
Energy-saving, direct spark ignition saves gas by operating only when the room thermostat calls for heating. Standard units are furnished with natural gas controls. A low-cost field installed kit for propane conversion is available for all units.
Low NOx units meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
Durable, dependable components
Durable, dependable components
Monoport inshot burners produce precise air-to-gas mixture, which provides for clean and efficient combustion. The large monoport on the inshot (or injection type) burners seldom, if ever, requires cleaning. All gas furnace components are accessible in one compartment.
Turbo-tubular™ heat exchangers are constructed of stainless steel for corrosion resistance and optimum heat transfer for improved efficiency. The tubular design permits hot gases to make multiple passes across the path of the supply air.
In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
In addition, dimples located on the heat exchanger walls force the hot gases to stay in close contact with the walls, improving heat transfer.
ECM Motor is standard on all models.
Direct-drive PSC (Permanent Split Capacitor) condenser-fan motors are designed to help reduce energy consumption and provide for cooing operation down to 40°F (4.4°C) outdoor temperature. Motormaster® II low ambient kit is available as a field-installed accessory.
Thermostat controls
Time Guard® II anti-short cycle protection circuitry. If a non-corporate thermostat without anti-short cycle protection is used the Time Guard II field-installed anti-short cycle kit is recommended.
Refrigerant system is designed to provide dependability. Liquid filter driers are used to promote clean, unrestricted operation. Each unit leaves the factory with non-ozone depleting and low global warming potential Puron Advance (R-454B) refrigerant charge. Refrigerant service connections make checking operating pressures easier. Factory-installed leak detection dissipation system for added safety.
High Pressure Switch provides added reliability for the compressor.
Indoor and Outdoor coils are computer-designed for optimum heat transfer and efficiency. The indoor coil is fabricated from aluminum tube and aluminum fins and is located inside the unit for protection against damage. The outdoor coil is internally mounted on the top tier of the unit.
Low sound ratings ensure a quiet indoor and outdoor environment with sound ratings as low as 69.0 dBA.
Easy to service cabinets provide easy 3-panel accessibility to serviceable components during maintenance and installation. The basepan with integrated drain pan provides easy ground level installation with mounting pad. A nesting feature ensures a positive basepan to roof curb seal when the unit is roof mounted. A convenient 3/4-in. (19.05 mm) wide perimeter flange makes frame mounting on a rooftop easy.
Standard horizontal metal duct covers with insulation come with the unit \and cover the horizontal duct openings. These can be left in place if the units are converted to downflow.
Standard horizontal metal duct covers with insulation come with the unit \and cover the horizontal duct openings. These can be left in place if the units are converted to downflow.
Integrated Gas Control (IGC) board provides safe and efficient control of heating and simplifies trouble-shooting through its built-in diagnostic function.
Cabinets are constructed of heavyduty, phosphated, zinc-coated prepainted steel capable of withstanding 500 hours in salt spray. Interior surfaces of the evaporator/heat exchanger compartment are insulated with cleanable semi-rigid insulation board, which keeps the conditioned air from being affected by the outdoor ambient temperature and provides improved indoor air quality. (Conforms to American Society of Heating, Refrigeration and Air Conditioning Engineers 62.2.) The sloped drain pan minimizes standing water in the drain. An external drain is provided.
Limited Warranty*
• Default 5-year parts limited warranty
- 10-year parts limited warranty with timely registration. Equipment must be registered within 90 days of original installation, except in jurisdictions where warranty benefits cannot be conditioned on registration.
* Applies to original purchaser/homeowner and 5 years to subsequent owners.
• Default 5-year on compressor limited warranty
-10-year on compressor limited warranty with timely registration. Equipment must be registered within 90 days of original installation, except in jurisdictions where warranty benefits cannot be conditioned on registration.
* Applies to original purchaser/homeowner and 5 years to subsequent owners.
• Default 20-year stainless steel heat exchanger limited warranty
- Life stainless steel limited warranty with timely registration. Equipment must be registered within 90 days of original installation, except in jurisdictions where warranty benefits cannot be conditioned on registration.
* Applies to original purchaser/homeowner and 5 years to subsequent owners. See warranty certificate for complete details and restrictions.
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.2 ★★★★★
Based on 21 reviews
Sort
Product Reviews
★★★★★ 5
Outstanding Frother!
Color: Space Gray
Exceptional! This frother is in another league compared to the cheapo push button frothers. The motor is smooth, quiet and powerful. This has an intuitive thumb dial on top that operates smoothly with a wide range of smooth speed adjustment. It’s gentle enough to froth a little bit of milk for a macchiato and powerful enough to scramble 3 eggs. The head is removable for easy cleaning. It’s also rechargeable. I charged this the day I bought it on April first. I use it at least twice a day. It’s September 26th today and I have yet to recharge it and it’s not showing any signs of needing a charge. One minor quibble is that they give you 2 of the same frother heads. They are built so well, that I don’t imagine it ever wearing out. It would have been nice to get a whisk or something different. Not a deal breaker at all though.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 26, 2025
★★★★★ 5
Solid unit
Color: Black
Handheld Mixer/Frother Review
A Premium Choice That Transforms Morning Coffee
I am thoroughly impressed with this handheld mixer and frother. Each morning, I blend cacao and collagen powder into my coffee, and in the past, I always ended up with stubborn lumps using only a spoon or whisk. I had previously purchased a few inexpensive handheld mixers, but they disappointed me both in price and performance, struggling to mix the powders thoroughly—especially at the bottom of the cup. I came close to abandoning handheld mixers altogether, but decided to give it one last try.
After reading countless reviews and carefully comparing models, I opted to invest in a higher-end handheld mixer. The anticipation was high—would this mixer truly distinguish itself from the budget options cluttering my kitchen drawer? From the moment I unboxed it, the difference was clear. The mixer felt substantial in my hand, and the build quality reflected thoughtful engineering.
While this model cost roughly twice as much as the cheaper alternatives, it proved to be well worth the investment. Initially, I was concerned about the dial at the top, fearing it might be difficult to control. However, I was pleasantly surprised by its intuitive operation. The unit offers a solid feel, plenty of power, and a versatile range of speeds—from a gentle stir perfect for coffee to an impressively fast setting.
I had not previously considered using this mixer as a frother, but as a cappuccino enthusiast, I decided to give it a try. I heated both 2% milk and oat milk to take the chill off, then submerged the mixing wand. Allowing the mixer to rise above the milk introduced air and created a rich, creamy foam—an unbelievable result. My homemade cappuccino now tastes like something from a café.
The controls are robust, the construction is reliable, and the power is consistent. Cleanup is effortless, requiring only a quick rinse under the tap. The battery life is also noteworthy, lasting through several uses without losing strength.
If you are hesitant to spend a bit more on a quality handheld mixer, I wholeheartedly recommend making the investment. This mixer has become an essential part of my morning routine. Excellent product—well done!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 13, 2025
★★★★★ 5
Solid, powerful, rechargeable
Color: Black
Very impressed with its weight, speed and performance. The dial is great
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 29, 2026
★★★★★ 4
Very nearly the perfect frother for all your basic frothing & mixing needs
Color: Black
There are a lot of middle-of-the-road frothers out there. I've been through a few of them in my recent search for something that could mix and froth well, without taking up any more outlets in my basement kitchen. Of the three Maestri frothers I've tried so far, this one wins the race by a nose.
Most recently, these Maestri frothers come in basically three versions: A single-speed @ 8000 RPM, a two-speed @8000/5500 RPM, and this stepless variable-speed version. Aside from that, the only real difference in recent version pack-outs is which attachments they come with.
Look over the reviews of the single-speed version and you'll find that while it can and does froth well, it starts at a single, high speed and gets there fast. This makes it pretty easy to spin liquid right out of most common cups and mugs.
There is a two-speed version, but it's harder to find, only comes in one color (Grape Purple), and while it's much better than the Maestri single-speed, it still has a couple of quirks that make this variable-speed version win out.
This mixes and froths whole milk, half-and-half, or heavy whipping cream, or just about anything else very well. Like all frothers, it takes a little time to learn its nuances and nail down the technique, this will definitely get you there.
The best feature of this is easily the speed control. Turn the knob to turn it on at a low speed that's great to get things started, then turn the knob to crank up the speed just enough to do what you need, whether that's mixing or frothing. The low starting speed makes it easy to keep things under control without undue spilling, and the max speed is more than enough to make quick work of getting your froth on.
There are really only two complaints I have with this stepless, variable speed version:
- I'd really like to have a Press On / Release Off button in addition to the Speed Control knob. More than one time have I gone to turn this off, only to spin the knob the wrong way and crank the speed up to ludicrous, sloshing liquid on the counter. Being able to turn it Off just by letting go of the button would be quick and easy. This configuration would allow using a preferred speed right from the start, while still allowing speed to be adjusted on-the-fly when needed.
- Give it a bigger battery. It would cost mere pennies to give this a 2000mAH+ instead of a 1200mAH battery, and I can't think of any reasonable downside to that.
- Give the motor a little more torque. It's fairly easy for the current motor, at any speed, to get bogged down in a thick protein powder mix, or when pressing the frother or other attachment a bit too hard into the bottom or side of the frothing container. A bit more "oomph" would prevent that.
I really like the overall design and features of thes Maestri frothers better than many other, cheaper versions. This variable-speed version is pretty great as it is and probably the one I would recommend over the single- or two-speed, for most people. But I often find myself using two hands -- one to hold it steady, and the other to turn it on and tweak the knob to the desired speed(s) -- for a device that should arguably need only one hand to use. Just a couple of minor tweaks as noted above would make this the overall best frother of its type that I've used.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2025
★★★★★ 5
Hands down, the BEST handheld frother I've ever used!
Color: Black
Hands down, the BEST handheld frother I've ever used! I got the black one, but any color will have the same results.
Over the past 12 years or so, I've used so many different handheld frothers and they've ALL fallen short of expectations for quality, longevity, power, features, and usability.
I've used everything from cheap, $15 models to $50+ models and everything in-between. Some with fancy attachments for various types of mixing, frothing, beating, whipping, etc. Some with rechargeable batteries, some without. Some AC powered, some with fixed whisks, some with detachable/replaceable whisks, some with stands, etc. NONE have been spectacular. Most broke within 6 months and got tossed. ALL were major disappointments in the end, including the "revered" Zulay models of which I tried several.
I finally found this Maestri House branded, variable speed frother with detachable / replaceable whisks and got one to try. I was literally on Cloud Nine the first time I turned it on. Like, WOW! Not only was it FAST on the highest speed, but it was powerful enough to churn right through milk, eggs, cream, etc, without bogging down like many others.
This thing makes milk froth like a milkshake and Matcha Lattes like nothing else I've ever experienced. I used to have to sift my Matcha, then whisk it in hot water, then froth milk and then blend them together to make the perfect latte. and if the milk was cold (my preference), pre-whisking in hot water was a must to avoid lumps. However, with THIS frother? I literally pour my milk into a tall tumbler, drop in un-sifted Matcha powder, and spin up the Maestri House frother at first on a medium low speed to get it mixed, then jump straight to the highest speed to really whip that milk and match up. After about 30-45 seconds, I've got the thickest, richest, smoothest, most aerated latte around. And NO LUMPS at all!!! What a time and dish saver!
And cleaning? I just run it under hot running water to get the shaft cleaned and then spin it up in a dish with hot running water for a few moments, then spin it on high for a few seconds in the air to dry it off instantly.
Now, I'll be honest here, too. The specs say it can go months on a charge, using it for a couple minutes a couple times daily. Well, I guess it could do that and still spin. But I use it FULL SPEED, churning hard for at least a minute a couple times per day. After about 2 weeks, I can start to notice a speed reduction so I just plug it back in on the charger. All things considered, this is still better than all the other handheld frothers I've used over the years.
After using the heck out of this thing for the past 7 months, I've even decided to start selling these in our Japanese gift shop. The manufacturer is has been very responsive both in customer support (I called them about an issue I thought I was having, and they called me back with a couple hours even though I didn't leave voicemail when they didn't answer right away) and in reseller support. I have to give these guys an A+ for responsiveness and quick resolution when problems might arise.
HIGHLY recommended!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on October 17, 2025