SKU: 93336490567

1997 Honda ATV TRX300 AN - FOURTRAX 300 18 Pole Stator Generator 31120-HC4-003

$23.19 $25.77
Save 10%
No.2 Bestseller on ateurope.org >

Pay in installments of $6.44 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 19 - Aug 24

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

1997 Honda ATV TRX300 AN - FOURTRAX 300 18 Pole Stator Generator 31120-HC4-003Generator Stator Fit for Honda ATV TRX300 TRX300FW Fourtrax 300 1988 2000 Features: Direct replacement to your original unit Plug and play, direct fit, easy installation. Highest grade lamination materials. Highest grade copper windings, resistant to 200 degrees Celsius. Connector included. Rubber grommet included. All products shipped are tested. As an inexpensive alternative to the expansive original part. Specifications: Condition: Aftermarket 100%

Generator Stator Fit for Honda ATV TRX300 TRX300FW Fourtrax 300 1988 - 2000

Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Connector included.
Rubber grommet included.
All products shipped are tested.
As an inexpensive alternative to the expansive original part.

Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Stator Coil

other specifications:
Number of wires: 6
Number of plugs: 2
Number of pins: 3 + 3
Number of poles: 18

Replacement Part Number:
31120-HC4-003
31120-HC4-004
31120-HC4-014
31120-HC4-750

THIS MODEL COMES IN 12 AND 18 POLE TYPE. THIS IS REPLACEMENT FOR 18 POLE TYPE.

IT WILL NOT FIT 12 POLES TYPE!!! MAKE SURE THAT YOUR ORIGINAL STATOR HAS 18 POLES.

Fits Make/Year/Model:
Fit for Honda ATV 1988 TRX300 A - FOURTRAX 300
Fit for Honda ATV 1988 TRX300FW A - FOURTRAX
Fit for Honda ATV 1989 TRX300 A - FOURTRAX 300
Fit for Honda ATV 1990 TRX300 A - FOURTRAX 300
Fit for Honda ATV 1990 TRX300FW A - FOURTRAX 4X4
Fit for Honda ATV 1991 TRX300 A - FOURTRAX 300
Fit for Honda ATV 1991 TRX300 AN - FOURTRAX 300
Fit for Honda ATV 1991 TRX300FW A - FOURTRAX 4X4
Fit for Honda ATV 1991 TRX300FW AN - FOURTRAX 4X4
Fit for Honda ATV 1992 TRX300 A - FOURTRAX 300
Fit for Honda ATV 1992 TRX300 AN - FOURTRAX 300
Fit for Honda ATV 1992 TRX300FW A - FOURTRAX 4X4
Fit for Honda ATV 1992 TRX300FW AN - FOURTRAX 4X4
Fit for Honda ATV 1993 TRX300 A - FOURTRAX
Fit for Honda ATV 1993 TRX300 AN
Fit for Honda ATV 1993 TRX300FW A - FOURTRAX 300 4X4
Fit for Honda ATV 1993 TRX300FW AN - FOURTRAX 300 4X4
Fit for Honda ATV 1994 TRX300 A - FOURTRAX 300
Fit for Honda ATV 1994 TRX300 AN - FOURTRAX 300
Fit for Honda ATV 1994 TRX300FW A - FOURTRAX 300 4X4
Fit for Honda ATV 1994 TRX300FW AN - FOURTRAX 300 4X4
Fit for Honda ATV 1995 TRX300 A - FOURTRAX 300
Fit for Honda ATV 1995 TRX300 AN - FOURTRAX 300
Fit for Honda ATV 1995 TRX300FW A - FOURTRAX 300 4X4
Fit for Honda ATV 1995 TRX300FW AN - FOURTRAX 300 4X4
Fit for Honda ATV 1996 TRX300 A - FOURTRAX 300
Fit for Honda ATV 1996 TRX300 AN - FOURTRAX 300
Fit for Honda ATV 1996 TRX300FW A - FOURTRAX 300 4X4
Fit for Honda ATV 1996 TRX300FW AN - FOURTRAX 300 4X4
Fit for Honda ATV 1997 TRX300 A - FOURTRAX 300
Fit for Honda ATV 1997 TRX300 AN - FOURTRAX 300
Fit for Honda ATV 1997 TRX300FW A - FOURTRAX 300 4X4
Fit for Honda ATV 1997 TRX300FW AN - FOURTRAX 300 4X4
Fit for Honda ATV 1998 TRX300 A - FOURTRAX 300
Fit for Honda ATV 1998 TRX300 AC - FOURTRAX 300
Fit for Honda ATV 1998 TRX300FW A - FOURTRAX 300 4X4
Fit for Honda ATV 1998 TRX300FW AC - FOURTRAX 300 4X4
Fit for Honda ATV 1999 TRX300 A - FOURTRAX 300
Fit for Honda ATV 1999 TRX300 AC - FOURTRAX 300
Fit for Honda ATV 1999 TRX300FW A - FOURTRAX 300 4X4
Fit for Honda ATV 1999 TRX300FW AC - FOURTRAX 300 4X4
Fit for Honda ATV 2000 TRX300 A
Fit for Honda ATV 2000 TRX300 AC
Fit for Honda ATV 2000 TRX300FW A - FOURTRAX 300
Fit for Honda ATV 2000 TRX300FW AC - FOURTRAX 300 4X4

(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)

Package Included:
1x Stator Generator

NOTICE:
Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.

Battery condition is important. No stator can make up for a bad or weak battery. If in doubt charge your battery and have it load tested, or simply replace it.
ALWAYS START WITH A FULLY CHARGED BATTERY !

The product on offer is an accessory or spare part and thus is not an original product of the vehicle manufacturer.
The name of the vehicle manufacturer is stated only as an indication of the determination of the product being offered as an accessory or spare part, to clarify, for which vehicle the product on offer fits.

Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 93336490567

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 13 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
B
Verified Purchase
B. Colonna
Houston, US
★★★★★ 4
Takes The Edge Off!
This is a decent product. If you are going to do a lot of edging, or want to do deep trenching to run conduit, etc. this is NOT the product you want. It is electric, so you are tethered to an outlet, and of course, the farther you go on extension cords, the less of the 12 amp juice you get. It also trenches to 1 1/2", which is OK, but not enough to dump conduit, etc. That said, this is a very good edger. Out of the box, it is minimal assembly. You connect the three pieces of the shaft, removing some edge tape from it, and inserting two metal bolts and plastic knobs, similar to most lawn mowers these days. Then you install the plastic handle with another bolt. That's it. For use, you have a lever which you pull up for edging and lower for trenching to adjust the group clearance. You also choose 1", 1/4", or 1 1/2" depth. Then you plug it in. There is a white line on top of the blade cover so you know where the blade is. You just pull the trigger to run the blade, or release the trigger to stop the blade. Be careful not to lose sight of your electric cord so you don't hit it! I edged along my driveway, about 50' on each side, as well as my front of my lawn, so another 85' along the lawn and the apron (both sides). That's over 350'. It cut through the grass and dirt easily. It struggled a couple of times, on some tough mounds of grass, but like any other tool, you don't force it when that happens, just back up and do that area again slowly. If you come too close to blacktop, Belgian block, stone, etc. you will see sparks so you will know. Just keep in mind, this is an edger. You will be left with the severed grass/sod to remove. In my case I was loooong overdue for a edging, so I spent a long time scraping the sod off the pavement with a shovel. I expect with more frequent ending, and now working with a cleaner edge, this will be less of an issue. Either way, that is not on the product, but the state of the lawn. The edger has 2 read wheels and one smaller front wheel so , although this is not like a big, gas-powered curb jumping unit, you have the option of attacking a curb edge from either the blade side or other side of the edger, so you can get real close to a Belgian block curb. I also did the edge where my grass meets my mulched flower bed, but that was more of a trimming than a edge removal. Overall, the Work edger did as good, or better, a job than my string trimmer, and I didn't have to stop every few minutes to rewrap string. Plus it trenched enough to give me a definitive edge, whereas the string edger just cuts into the grass, not a real trench.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on September 28, 2020
L
Verified Purchase
Lynetta Mason
West Palm Beach, US
★★★★★ 5
Easy to use for a clean looking cut!
I do wish there was a cordless version but I'm so glad I bought this. It took some time to edge everything the first time because I had to cut the lines but it's been a breeze ever since. I just walk the perimeter of the yard and driveway and it does it's job with ease. The front wheel has three settings which determines how far down the blade cuts and the blade has two settings for edging or trenching. The handle is stationary but it can be lifted up or down. There's a guideline on top of the blade guard that helps identify where the blade is going to make the cut. TIP: Lean it back on the back wheels before pulling the trigger and slowly bring it down because it will jump if the blade isn't lined up and touches the concrete. It doesn't roll well in the grass but it's very smooth when rolled on the concrete. It's definitely worth having to give a clean and finished look. It's well built and isn't too heavy but definitely has some weight to it. It's only loud when the blade hits the concrete otherwise it sounds like a drone. The only complaint I have is that I have to watch the cord closely other than that it's the perfect tool to give a clean look to the yard.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 5, 2025
M
Verified Purchase
Marc A.
Cuba, US
★★★★★ 5
Great product for the $$$$
This edger is awesome. Easy to put together. Intuitive. I put it together inside of 10 minutes. Shifted the edger "guide" down, and went to work. This corded electric model is WAYYY cheaper than the battery powered (or gas powered) models, and is absolutely up to the task. Lightweight and maneuverable. Quiet. Easy to store. The motor got a little "bound" when I tried to edge too fast, but the manual had clearly warned me on this - to back up, let the blade get back up to speed, and then edge again. The lawn edges are now straight, well-defined, and immaculate.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 2, 2026
J
Verified Purchase
JW
Alexandria, US
★★★★★ 5
Great edger
This was a gift for someone very picky about their yard. They loved it and said it works great.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 9, 2026
P
Verified Purchase
PrimeUser7887
Cuba, US
★★★★★ 3
Great but could be Epic
If you’re looking for a solid edger for sidewalks and driveways, this is a great tool. It’s powerful, well-built, easy to assemble, and simple to use. For edging, I would definitely recommend it. However, I wouldn’t recommend it as a true trencher. I bought it for both purposes but mainly needed it for trenching. The maximum cutting depth is only about 1.5 inches, which isn’t deep enough for most garden borders or running cable. In my opinion, a real trencher should be able to reach at least 3 inches deep. The limitation comes down to the blade size and guard design. WORX could improve this model with a larger blade guard and additional wheel depth settings. If they released a version capable of 3–3.25 inch trenching depth, it would really stand out in the market. Overall, it’s an excellent edger, just not a true trencher.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026

recommand products

Louis Armstrong Newport Jazz Festival Poster
21.21
Kellers Sconce Black
135.00
Fernand Leger Galerie Louise Leiris Exhibition Poster
21.21
Nat King Cole New York Studio Sessions Poster
21.21
Moss Mat 12"
15.00