SKU: 93456599475

Brai Outdoor Table - Taupe

$161.10 $179.00
Save 10%
No.2 Bestseller on ateurope.org >

Pay in installments of $44.75 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 18 - Aug 23

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

Brai Outdoor Table - TaupeBrai outdoor table in taupe galvanised steel 70 x 70cm The Brai collection combines the modernity of minimalist design with hard wearing functionality, ideal to accompany you in your outdoor spaces all year round. This collection stands out for its clean, contemporary style and durability: the galvanised steel is highly resistant to abrasion and corrosion, ensuring that the piece maintains its integrity and beauty even in outdoor environments. Its

Brai outdoor table in taupe galvanised steel 70 x 70cm

The Brai collection combines the modernity of minimalist design with hard-wearing functionality, ideal to accompany you in your outdoor spaces all year round. This collection stands out for its clean, contemporary style and durability: the galvanised steel is highly resistant to abrasion and corrosion, ensuring that the piece maintains its integrity and beauty even in outdoor environments. Its base is also reinforced with cement to provide stability. Its design features rounded corners and subtle grooves that give it a distinctive touch, providing visual softness and a fluid aesthetic that adapts to any modern décor. Plus, the plastic leg protectors protect the floor, preventing scratches and ensuring stability on any type of floor surface. Suitable for indoors and outdoors, this is a designer collection that adds functionality and elegance to your outdoor moments. Ideal for those looking for a balance of style and resistance.

About this product

  • Brai table in galvanised steel, with rounded corners and subtle grooves, designed for outdoor use all year round.
  • Suitable for outdoor use.
  • More colours available

Dimensions

Width 70 cm

Length 70 cm

Height 73 cm

Delivery Information: Delivery times may vary depending on stock availability and can take 4-6 weeks. For a more accurate estimate, please call 061-414490 or email [email protected]

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 93456599475

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.6 ★★★★★
Based on 10 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
S
Verified Purchase
Steve M.
San Leandro, US
★★★★★ 5
Works well. You need to drill a 3/8” hole
Appears to be well made, alignment bar slides in nicely. As stated, you need to drill a hole in the bar for the gimble bearing driver, the directions are not clear, what I did was before I take out the old gimble bearing, put an O ring on the bar close to the last step on the bar, slide the bar all the way in, then carefully slide the bar out, this marks the distance from the back of the gimble bearing to where the shaft on the outdrive bottoms out, move the O ring a 1/4” towards the stepped part of the alignment tool (this is so you won’t bottom out the alignment tool when driving the gimble bearing in) then slide the driver puck up to the O ring and use a 3/8” diameter transfer punch through the side hole in the puck to mark the bar. You need to drill a 3/8” diameter hole in the alignment bar, two V blocks, some clamps, and a drill press will make drilling much easier, after the bar is securely mounted and centered in the drill press, use a center drill, then 1/4” drill first, using plenty of oil, drill all the way through, then use the 3/8” drill, deburr both sides and you should be good to go. People complain that it doesn’t come pre-drilled, the reason is that not all out drives are the same so you have to fit it to the outdrive that you have. Fortunately, I have a machine shop at my house and have a jig setup with various drill bushings, but the method I described above should work for you. Just make sure you’re perfectly centered and secure before you start drilling.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
N
Verified Purchase
Nancy filippi
San Leandro, US
★★★★★ 5
A must pull your gimbal bearing
You do need to drill a hole but worked perfect
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 26, 2025
R
Verified Purchase
rich911s
Whiting, US
★★★★★ 5
Worked for Volvo Penta SX Gimbal Bearing
Very heavy tool, I was surprised. Pulled my bearing like it was nothing. Putting the new bearing in was a little more difficult as you have to drill a hole in the engine alignment shaft where it will work for your particular outdrive. Not hard, but it does not come pre-drilled as the required depth for each particular gimbal bearing differs by manufacturer and model. Measure your bearing placement before removal and check that it was installed correctly in the first place. The bearing should line up with the grease fitting and the o-rings on the drive shaft should end up riding in the middle of the bearing. once you have your measurement drill the hole, I used a drill press. I suppose you could use it on multiple outdrive models as long as you can drill more holes.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 5, 2023
G
Verified Purchase
Greg
Houston, US
★★★★★ 5
Great value
This kit worked perfectly on my Alpha one mercury outdrive. I saw a lot of people mention that it was a hassle to drill the hole when you better have all this alignment stuff. I threw it in use my regular drill drill guide and then the second hole was lined up. Pulling Gimble be very easy. I did have to adjust it up at an angle because my bearing was sitting in their crooked and it came out the second time I made the adjustment to the angle. I would highly recommend this.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2024
T
Verified Purchase
Tommy Knapp
Lexington, US
★★★★★ 1
Unfinished product - doesn't work - waste of money
in order to use this as an installation tool the directions tell you to drill a hole through the 2 inch steel rod..... either this hole should already be drilled, or this should not be advertised as an installation tool..... it will not install any bearings without extensive modification and requires the use of a drill press or a lathe. very dissatisfied that I now have to buy ANOTHER tool just to finish this job because this one doesn't do what it's described to do.... piece of junk... typical amazon garbage.... this is why I haven't used amazon in over a year... they rip you off with garbage.... I should have known better .... don't buy this junk .... Now they say 20 -30 days to get my refund .... Don't waste your time
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 26, 2026

recommand products

1 Kirby Vacuum Part 163514 / Trim Strip- Headlight Cap- Av / AV2
13.26
MEN'S MONK ROBE DELUXE-XXL - Scary Halloween Costume Adult Outfit Cosplay Party
82.59
1 Kirby Vacuum Part 224212 / Air Intake Guard Sentria Ii
18.84
1 Kirby Vacuum Part 300306S / Repair Kit, Sentria Ii, Css Tank
25.03
1 Kirby Vacuum Belt 519212 / Lifter Sentria Ii, Renovator Nozzle
17.80