Steeda Adjustable Front Sway Bar 1-3/8'' 555-1015 Ford Mustang 2015-2026

Steeda Adjustable Front Sway Bar 1-3/8'' 555-1015 Ford Mustang 2015-2026Part Number: 555 1015 Steeda has the track proven anti roll bar combinations that will give you reduced body roll, adjustability, and the best handling of any sway bar package out on the market. Our press fit welded billet ends are far stronger than stamping the end of the bar. Billet machining construction of the Steeda Mustang Front and Rear Sway Bar ends makes for far greater strength for a bulletproof anti roll bar. Our sway bars have machined

Part Number: 555-1015

Steeda has the track-proven anti roll bar combinations that will give you reduced body roll, adjustability, and the best handling of any sway bar package out on the market.

Our press-fit welded billet ends are far stronger than stamping the end of the bar. Billet machining construction of the Steeda Mustang Front and Rear Sway Bar ends makes for far greater strength for a bulletproof anti roll bar.

Our sway bars have machined steel billet sway bar ends, whereas others on the market have coined ends. What does this mean? Our sway bar ends are machined out of billet steel round stock, in-house, on our multi-axis CNC lathes and go through hundreds of computer simulations to ensure the ultimate in strength and performance - this provides greater resistance to bending stresses, and has three major advantages:

These parts are less prone to cracking/fatigue failure on the ends themselves.
It also reduces unwanted deflection in the sway bar end. Excess deflection creates unwanted geometry changes, which physically changes your sway bar stiffness to a non-ideal rate. With less unwanted deflection, our bars will 'wear out' slower - any spring will eventually become softer over time as it is cycled through its life, our bars will maintain their designed rate for longer with less unwanted deflection.

Our bar rates are developed and optimized through advanced vehicle dynamic simulation and through extensive real-world testing. We engineered these bars to control the vehicles' roll stiffness properly while still allowing you to run softer springs. This optimizes your overall grip and balance of the vehicle while still allowing you to maintain exceptional ride quality.

As a recommended initial "standard" setup we advise using the middle of the 3 holes on the rear and the second hole from the end of the bar on the front bar (4 holes). Then adjust to suit driving style, car setup and conditions!

Don't settle for sway bars that are not track tested and made by companies who do not specialize in Mustangs. Steeda engineers, races, and wins with what it sells, Order the best package for your daily driven or track driven 2015+ Mustang today!

Homologated / Certified for European use

Product Benefits

• Improved handling, more stable cornering
• Reduced body roll
• Front ARB diameter 1-3/8" (35 mm)
• Designed and manufactured in-house in the USA by Steeda
• Competition and street-proven
• Includes anti roll bar bushing
• As used in our Steeda Q-Series Mustangs
• Homologated / Certified for European use
• Normally in Stock

OPTION: Include Steeda Billet Anti Roll Bar brackets - Super Strong and Super Good Looking - Essential for Track Users.

Note:Front Sway bar will fit vehicles equipped with MagneRide Suspension but cannot be used at softest setting due to contact with factory ride height sensor.

Fitment:
2015-2023 inc 2018+ GT & Ecoboost, including Bullitt & Mach one
2024+ GT, Ecoboost and Darkhorse

STEEDA EUROPE NOTE: The rear roll bar (555-1016) USED to be 1 1/4" (31.75mm) but was redesigned at the end of 2021 to be the same stiffness with a smaller diameter. So older bars will NOT be 1"