Cortec VmCI-307 - Anti Rust Powder for Multi-Metals

Cortec VmCI-307 - Anti Rust Powder for Multi-MetalsKey Features: Protects both ferrous and non ferrous metals from rust. Creates a protective layer on metal surfaces. Provides up to 24 months of corrosion protection. Apply by dusting, fogging or sprinkling. Easily removable Efficient to protect metals within enclosed spaces and cavities. Description: Cortec VmCI 307 is a Vapor phase Rust Inhibitor Powder for corrosion protection of both ferrous and non ferrous metals in recessed areas, interior

Key Features:

• Protects both ferrous and non-ferrous metals from rust.
• Creates a protective layer on metal surfaces.
• Provides up to 24 months of corrosion protection.
  
• Apply by dusting, fogging or sprinkling. Easily removable
  
• Efficient to protect metals within enclosed spaces and cavities.

Description:
Cortec® VmCI-307® is a Vapor phase Rust Inhibitor Powder for corrosion protection of both ferrous and non-ferrous metals in recessed areas, interior cavities and voids. The VCIs vaporize and adsorb on all metal surfaces. They create an inhibiting layer that provides up to 24 months of rust prevention. The protective layer self replenishes by continuous vapor redeposition. It does not contain nitrites, phosphates or heavy metals. Little or no surface preparation needed. Protected products can be shipped to customers without removing powder.

Packaging:
Available in 5 pound (2.3 kg) and 50 pound (23 kg) fiber-lined drums. Store indoors and out of direct sunlight. Contact Us to get a quote for this product in 100 pound (45 kg) drums.

How to Use:
Apply Cortec® VmCI-307® powder by dusting, fogging or sprinkling. After application simply cover, close or seal the interior cavity or void. Fog using a low pressure air hose and sandblast cup. Large conventional sandblasting systems can also be used. The product can be removed using a low pressure air gun or by a water rinse.

Precautions:
VmCI-307® has a tendency to clump in the packaged drum. Clumping does not affect performance. Large clumps can be broken apart and use as normal. Powder is not soluble in hydrocarbon fluids. Rinse from vessels before adding hydrocarbon fluids. Powder should be removed from area before welding.

Dosage:
Use 0.3-0.5 ounce of powder per 1 cubic foot of enclosed space (300-500 g/m3).

Typical Applications:
VmCI-307® protects carbon steel, stainless steel, copper, brass, aluminum, cast iron, silver, galvanized steel and tinplate. VmCI-307® can be used to protect tubular structures, pipes and vessels. For bottom plate protection of above-ground petroleum storage, internal surfaces of compressors, turbines, engines, tanks, boilers, heat exchangers. Use for dry layup of closed circuit cooling systems. It can also be used to protect equipment after hydrostatic testing and to protect cavities and void spaces on ships, barges, offshore platforms and sewage plants.