do88 Front Charge Intercooler Radiator BMW F Series B58 Gen 1
SKU: 36809609793

do88 Front Charge Intercooler Radiator BMW F Series B58 Gen 1

Sale price$291.60 Regular price$324.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 6 - Jul 11

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

do88 Front Charge Intercooler Radiator BMW F Series B58 Gen 1Compatible with BMW M140i, M240i, 340i, 440i (B58 Gen 1) Unlock reliable performance from your tuned or track driven B58 powered BMW with do88s upgraded Front Intercooler Water Cooler. Designed as a direct fit replacement for the factory heat exchanger, this TIG welded all aluminium unit massively increases cooling capacity to combat heat soak a known issue on B58 cars under prolonged load. Why Upgrade? Heat Soak A Common Limiting Factor on Tuned B58

Compatible with BMW M140i, M240i, 340i, 440i (B58 Gen 1)

Unlock reliable performance from your tuned or track-driven B58-powered BMW with do88’s upgraded Front Intercooler Water Cooler. Designed as a direct-fit replacement for the factory heat exchanger, this TIG-welded all-aluminium unit massively increases cooling capacity to combat heat soak — a known issue on B58 cars under prolonged load.


Why Upgrade?

Heat Soak – A Common Limiting Factor on Tuned B58 Engines

Just like the S55 in the F80 M3/M4, the B58 uses a water-to-air intercooler system — but with the intercooler integrated into the intake manifold. Unfortunately, this makes the system prone to heat soak, especially when tuned or driven hard. When intake temperatures rise, the ECU will reduce ignition timing or enter limp mode to protect the engine.


do88’s Cooling Solution

The do88 Front Intercooler Water Cooler dramatically increases the system’s ability to shed heat, allowing your B58 to maintain consistent performance during spirited road driving or track sessions.

Key Features

  • 66% larger cell pack than OEM

  • 48mm thick dual-row core for a 120% increase in active cooling area

  • Triple-pass design ensures coolant passes through three times for maximum efficiency

  • All-aluminium construction with TIG-welded end tanks for strength and durability

  • Higher fluid volume for improved thermal stability

  • Direct-fit installation with provisions for original transmission cooler


Compatibility

  • BMW M140i (F20/F21)

  • BMW M240i (F22/F23)

  • BMW 340i (F30/F31/F34)

  • BMW 440i (F32/F33/F36)

  • Suitable for B58 Gen 1 engines only


Installation Notes

No cutting, trimming or permanent modifications are required. Supplied with detailed installation instructions, this is a straightforward upgrade for any B58 owner seeking enhanced reliability and performance. Includes integrated mounting points for the factory transmission cooler.


Why Choose do88?

Backed by extensive development and CFD testing in Sweden, do88 products are engineered to perform under the most demanding conditions. With real-world testing on both track and road, their products are trusted by enthusiasts and motorsport professionals alike.


Need More Cooling?

Pair this heat exchanger with do88’s full intake manifold and charge pipe upgrades for a complete solution to airflow and intake cooling on the B58 platform.

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 36809609793

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.5 ★★★★★
Based on 2396 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
P
Verified Purchase
Pure C.
Draper, US
★★★★★ 4
Short
Size: 8 cube
Little bit shorter than what I thought it would be but it was not hard to put together and I like it
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 25, 2026
T
The Wachiras
Draper, US
★★★★★ 5
Nice entry way table
Size: 8 cube, Size: 8 cube
Great-looking 8 cube organizer with a really nice finish. The color is beautiful, and the top has a slightly matte stain that gives it a clean, modern look without being too shiny. Assembly does take two people at certain points, as you’ll need someone to hold pieces in place while aligning and securing them. Not difficult overall, just easier with an extra set of hands. It’s a bit shorter than a typical entry table, but the width is great and it offers plenty of storage space. Perfect for organizing baskets, shoes, or everyday items while still looking stylish.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 29, 2026
Z
Verified Purchase
zeel
New York, US
★★★★★ 5
Anyone with multiple monitors should buy this
I have been wanting something like this for years. I use three monitors, and keeping them all aligned is impossible. I've considered using tape, but that seems like it would lead to a sticky mess and it would never hold well. I imagined some solution with magnets, but never came up with anything that I thought I could implement myself. As soon as I saw this product, I was ordered two sets. I knew that this was either going to be a revolution, or a huge disappointment. It was not a disappointment. Installation is simple as can be, clean off your monitor back with some alcohol wipes (they should consider including some, would be a nice touch). For my screens, alignment was super easy because they have really square corners so I just stuck my aligners right at the corners and it worked great. For a screen with a curved back or something more geometric you probably want to get the screens in place first, then stick both parts at the same time. Either way, they stuck really well and the pads are flexible so they would work on a curved back just as well as flat. The brackets also have a locking part that allows you to slide them side to side a bit giving you more flexibility in mounting, and then you can lock them down once everything is lined up so they hold nice and firm. I also managed to screw up and put the wrong part on the wrong side, but luckily if you unlock the bracket you can slide the main part off of the adhesive part completely, so I was able to simply swap the two main parts without needing to peel the adhesive part off. It's a well thought out design and I was impressed by just how much flexibility there was in the mounting solution while still allowing for a very easy installation and rigid final setup. The magnets are strong, strong enough that if I needed to move a monitor regularly it would actually be annoying because while you can definitely take these apart they hold way too well to be doing so all the time. These are clearly intended for a permanent installation, without making it overly difficult to take things apart if you have to. If you have to turn a screen often though, such as to show something to a client or make the screen visible from another area of the room, I'm not sure if these will be what you need as they don't just come apart easily. If you want your screens to stay where you put them though, they are awesome! For me, these were perfect, and based on the design I think they should work well for most monitors and most setups. I'm so glad this product exists, it was well worth the money.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on August 10, 2025
J
Verified Purchase
Jimmy Mitchelll
West Palm Beach, US
★★★★★ 5
Great product!!!
I feel the price is a little high, but the product is amazing! Works just as described!!! I will be purchasing another set for the bottom of my work monitors. Currently their is just 1 set keeping these level.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 3, 2026
R
Verified Purchase
Ryan's Reviews
Belleville, US
★★★★★ 5
I'd give 10 stars if I could
Holy cow! This is it! For YEARS I've been looking for a product that would align the bezels on my monitors. I found this product by scrolling through reels and then found the link to Amazon. The price was steep and I was hesitant, but I took the gamble and I'm so glad I did. Installation is slightly confusing, and you really want to know how this works before you adhere it to any surface. I'll break it down for you: Align your monitors flat next to each other. Attach one side with the adhesive, then snap the other side on with the magnet. Peel that adhesive strip and lay it on your second monitor so that they are even. Repeat for the bottom. Twist the U shape up for the left, down for the right. Adjust your angle and then lock them by putting the U shape back to how it was. That's it. The stability on these simple magnets is excellent. I went from a wobbly mount to locked in and only moving when I want it to. I'm so happy this product exists. That's German engineering for you. 💪💪
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 17, 2026

recommand products