- Volumes: lunchbox – 5.5 cups, thermos – 250ml
- Weight: 770g
- Keeps hot food hot and cold food cool. OmieBox uses two types of insulation, so meals are always served at the perfect temperature. Air insulation, vacuum insulation, plus an airtight seal minimizes heat transfer to keep its food fresh and yummy
- Great leak-proof design – the insulated container can hold liquids, and the cold compartments can hold ‘wet’ foods (e.g. dips, hummus, yoghurt but not watery liquids) without leaking
- Equipped with its own large handle, it’s easy for little hands to carry, and there’s no need for a lunch bag
- The thermos jar can easily be removed, and a sandwich can fit perfectly in its place when required
- The divider in the cold section is removable, maximising food options
- The thermos jar is wide and shallow, making it easy for kids to scoop their food out and also to clean
- Keeps food warmer for longer; 100C water will be 56C after 6 hours
- Made from 18/8 food grade stainless steel, BPA free & Phthalate free plastic, food grade silicone
OmieBox How to Use:
- Wet foods (soup, yoghurt) go in the Thermos!
- First, fill it with hot (or cold) water and let it stand with the lid off for 5 minutes. Then empty. Be careful with hot water!
- Do not fill above the inner ridge of the vacuum-insulated container; overfilling can cause leakage.
- Twist the securing insert around the Thermos in a clockwise direction. Skip this step if you’re not planning to put the Thermos inside OmieBox.
- To seal, hold the Thermos with one hand & the lid with your other hand. Twist the lid into the Thermos in a clockwise direction.
- The side compartments are great for dry foods (crackers, carrot sticks), but you can pack moist items here too. Just make sure there’s < 1 tsp of liquid in each compartment.
- To close OmieBox, fold down the lid and latch it. Use the palms of your hands to push down on the box lid once it’s closed. This will activate the lid seal.
- The divider is great for keeping peas away from carrots, but its sub-sections are not leakproof.
- HAND WASH only! Don’t put your OmieBox in the freezer or microwave.
- Use warm, soapy water to wash. Do not use abrasive cleaners or scrubbers.
Pay in installments of $27.50 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 1 - Aug 6
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
OmieLife | OmieBox Thermos Bento Lunchbox Purple PlumOmieBox is an insulated bento box that holds hot and cold food in one box. It has two temperature zones, so the main meal keeps warm while veggies and fruits stay cool. Finally you can send your little ones favourite meals to school and be confident that theyll look and taste great. Omiebox protects the love and hard work you put into every meal. So kids get the fuel they need to grow, and more importantly, they feel how much theyre loved. Your little
OmieBox is an insulated bento box that holds hot and cold food in one box. It has two temperature zones, so the main meal keeps warm while veggies and fruits stay cool. Finally - you can send your little one’s favourite meals to school and be confident that they’ll look and taste great. Omiebox protects the love and hard work you put into every meal. So kids get the fuel they need to grow, and more importantly, they feel how much they’re loved. Your little ones will eat better and healthier, and you’ll be happy knowing you’re providing them with the best nutrition to fuel their day.
Omiebox is designed to be super easy for kids to use. It’s easy to open, requires no setup, and lets kids easily scoop food out. OmieBox gives kids control over their meals, so they eat better.
Highlights:
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.3 ★★★★★
Based on 16 reviews
Sort
Product Reviews
★★★★★ 5
Quality Printer
Color: Black, Style: ET-2800-B, Pattern Name: Printer
Wonderful multi purpose printer. I bought this months ago and finally got it set up. Set up was easy. Love that the printer is so light weight and fairly compact that I can move it wherever if needed. The supply of ink that came with it was awesome. The ink goes a long way. I have printed out a lot of photos on this printer and the quality has been very good. I have not encountered any paper jams. The photo printing has not been smudged nor has the color been uneven. From documents to photos this little printer does it all and does it very well. When my work printer dies I will be replacing it w another Epson Eco Tank for sure.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 15, 2026
★★★★★ 1
0 STARS!! DO NOT BUY!! HORRIBLE!!
Color: Black, Style: ET-2800-B, Pattern Name: Printer, Color: Black, Style: ET-2800-B, Pattern Name: Printer
DO NOT BUY! 0 STARS
-I would give 0 stars if I could. This EPSON ET-2800 is the worst printer I have ever owned.
-I work from home where I need to do small print jobs throughout the month. I didn’t need a printer that is super fast or had a lot of bells and whistles. I searched many, many, many reviews and this Epson ET-2800 kept coming up as a really good option for my purposes. It had great reviews and it supposedly uses less ink.
-I went ahead and bought it and it was delivered Dec. 28.
-Throughout the month of January I did a few print jobs here and there. Everything seemed ok.
Toward the end of January I noticed that there was black shadowing behind a whole horizontal line on one of my print jobs. The shadow went the whole width of the paper. Thought it was a one-off and didn’t think about it too much since I had so much going on at the time. I also never dreamed that I would need to clean my printer since I hadn’t even owned it for a month at this point.
-February 2 I started printing some things for work again and the lettering had lines through the center of the page. Even though I had just had the printer for a month and hadn’t printed that much stuff so I really shouldn’t have to clean it already, I used the “clean nozzle” tool on the printer. **I had to do the cleaning cycle 8 times before it was printing correctly meaning there were no missing segments on the sheet that is printed after the cleaning. ** This was a huge waste of my time and ink and paper!!!
-February 16 I attempted to print some pages and again there were lines throughout the papers!!
-February 17 I called Amazon to try to get a refund and they said I was outside of the return window. So -I called Epson. I explained what was happening and the lady told me before they would do anything I had to go through some “detailed instructions” on how to clean the printer. Only AFTER I completed all the steps would they even think about helping me.
-So first step is to perform a nozzle cleaning per the instructions. Did this.
-Instructions say to wait 12 hours before doing anything else. So I waited 12 hours and did another cleaning. Did this twice.
The printer showed no broken/missing segments.
-So I printed some pages and several of the pages had black smudges/lines/dots on the tops of the pages and most of them had black ink all over the bottom right corners of the papers.
-Did the print nozzle cleaning and had broken/missing segments again.
-Instructions say to do a head cleaning. Did head cleaning twice I think, and no broken/missing segments.
-Printed a few pages and several of the pages had the shadows behind the whole horizontal line again and also some random black dots sprinkled throughout several pages.
-Ran a Power Cleaning which is the last step of this process.
This process by the way uses up A LOT of ink! My black ink is now less than half!! All the colors are down by ¼! They were full obviously when I started using the printer and the black was only down a smidge at the beginning of this whole cleaning process.
-Now I have to wait 12 hours to see if the quality improves.
-This is absolutely ridiculous!!!
This whole process has wasted my time (each cleaning takes at least 3 minutes to do. The Power Cleaning takes 12 minutes).
This whole process has used up a TON of my ink!
This whole process has used up a ton of paper!!
I shouldn’t have to clean my printer head or nozzle every single time I need to print!
I have only had this printer for 7 weeks!!!
DO NOT BUY THIS PRINTER! It is junk!
I only hope I can get a refund after all this...
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 18, 2025
★★★★★ 5
Almost a year after purchase and this printer has not let me down!
Color: Black, Style: ET-2800-B, Pattern Name: Printer
I wanted to wait to write a review on this printer to see how it held up over time. Happy to report, after almost a year, it is still working perfectly! I was very nervous about purchasing a printer since it was my first time having to shop for one and almost every printer I looked at had something negative to say about the product. After extensive research, I decided to take a leap with the Epson EcoTank 2800.
I was looking for a printer to use for recreational use. Something with decent print quality and longevity as well as something on a reasonable budget. I normally print full pages of color and have been using it regularly for around a year and I have about half of the ink that came with the printer left. Safe to say, the ink lasts a while. The quality may not be the top of the line quality you can get with a more expensive printer, but for the price and just everyday use, the quality is satisfactory. It was easy to set up and walked you through the instructions to connect to devices and configure it. The screen is a little small but if you can overlook that, it really is a nice printer. I have used regular printer paper, card stock, and sticker paper with this printer and I try to load only a few sheets at a time to avoid a jam but I haven't had any issues with it so far.
Overall, I am extremely happy with my purchase. It can be extremely difficult to find a decent printer and some reviews can be misleading or leave you with questions on if the product is for you. If you are looking for something for printing everyday with decent quality and ink consumption that won't cost you a fortune, this printer is definitely worth taking a chance on!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 24, 2026
★★★★★ 4
Printing is great, wifi is a problem (I figured out how to make it work!)
Color: White, Style: ET-2800-W, Pattern Name: Printer
I was on the fence about buying this printer because most of the 1 star reviews all said the same thing... "The Wifi would not work"
So I followed the instructions, Turned on the print, downloaded the IOS app, connected to the printer via Bluetooth, installed the ink, initialized the printheads. While that was going on, the app asked me to setup the wifi. a List of SSID's came up and I selected the one I wanted. I put in the password and it connected and the icon on the printer turned blue. I have a Unifi setup and I could see that the printer connected to access point #3 @ 2.4ghz and got an ip address. I locked the IP address to the printer.
(For my instructions to work for you, you need to make a reservation or lock the ipaddress that your DHCP server provided to the printer. ) If you don't do this, you will get a different address every time you turn the printer on and the computer and app will not be able to find the printer.
When the initialization was complete, the app on my phone said it could not connect to the printer. I decided to try to connect to a computer and come back to the phone app. I downloaded the software package from Epson and ran it. When it went to connect to the printer it could not find it and brings up a list of troubleshooting steps that are not likely to do anything.
There are videos about this problem and they are all useless. I am an IT professional with 26 years of experience. I am not going to unplug the printer and wait five minutes, I am not going to re-boot my router, I have a Unifi network environment with over 150 devices connected... (I have great wifi coverage, I am not moving my printer anywhere) My network works just fine, this printer is the issue!
So at this point, I know that the printer IS connected to my wifi and it got an IP address. This is not a wifi problem as everyone seems to think it is. It is an issue with the Epson software.
I decided to try to install it via the windows printer installer. I selected install via TCP/IP and put the ipaddress that my Unifi system provided to the printer. Windows found the printer and since the Epson app had already installed the drivers... just asked me what drivers I wanted to use. The ET-2800 showed up on the right hand side of the screen. I selected it, it installed and I was able to try a test print. It worked fine. I can print from my computer to the printer via the network.
Next was the phone app. The phone app has the option to find the printer via the IP address. I put the IP address in and it found the printer. The phone app works now too.
So, It took me some time to get this working, it should not have taken any time at all if the software worked correctly. The printer is really nice, it is a shame that the software is so bad when it comes to connecting to the printer.
So if you decide to buy one of these printers, save yourself the headache and just install using the ip address, it is quick and easy that way and it just works. I would have just purchased an HP printer, but I did not want to deal with all the issues of their subscription ink service. I feel like the cost of ink makes this printer worth the hassle of getting it to work.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 2, 2024
★★★★★ 5
Premium Print Quality Meets Economic Design
Color: White, Style: ET-2803, Pattern Name: Printer
I am very impressed with the manufacturer quality of this printer. It feels durable and well-engineered. The print quality is equally excellent; colors are vibrant and text is sharp, easily meeting the standards I need for both documents and photos.
Moving away from cartridges is a huge win. The ink lasts incredibly long, and the refill process is clean and simple.
The only thing I miss is a USB port for printing directly from external storage. My old HP printer had this feature, and it was extremely useful for printing files quickly without a computer. I wish this Epson model included that same convenience.
Final Verdict
A high-quality, reliable printer that produces great results. If you don't mind the lack of a direct USB drive slot, it’s an outstanding choice for home use.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 19, 2026