DinanTronics Stage 1 Tuner for BMW | F10 | F3X | N20 (NLA)

DinanTronics Stage 1 Tuner for BMW | F10 | F3X | N20 (NLA)The DinanTronics Power Module is the least invasive way of getting more power from your 328 428. The Dinan tuner box plugs into the existing sockets on your engine computer(s). The original wiring harness plugs into the Dinan tuner box. There is no cutting or splicing into wires and the whole harness is completely reversible at any time. Dinan has shown a gain of 46hp and 44ft lbs of torque with this system. Because the DinanTronics module plugs

The DinanTronics Power Module is the least invasive way of getting more power from your 328/428. The Dinan tuner box plugs into the existing sockets on your engine computer(s). The original wiring harness plugs into the Dinan tuner box. There is no cutting or splicing into wires and the whole harness is completely reversible at any time. Dinan has shown a gain of 46hp and 44ft-lbs of torque with this system.

Because the DinanTronics module plugs directly into the engine computer, it can control the data from every sensor on the engine - not just the two or three that other piggyback-style modules use. Instead of only modifying a boost and RPM sensor, the Dinan power module sends a modified signal for fuel and ignition tables, target Lambda (AFR), exhaust temperature, knock sensors, and more. It has the ability to correct short term fuel trim and ignition timing errors so even as the boost increases through the whole RPM range the engine mapping remains where it should. Not only does it make a lot of peak power, but it's also a smooth and consistent power gain over the entire RPM band. The Dinan tuner module is the most sophisticated on the market and is the only one that is 50-state legal.

Installation is plug and play but requires access to the entire engine compartment. The engine computer(s) is part of the intake manifold so access is tight. The Dinan module is installed under the radiator support and the harness has to be run to each computer. Detailed instructions are included but professional installation is strongly advised if you're not used to working around your engine.

Note: This version of the DINANTRONICS Performance Tuner is only compatible with vehicles equipped with the N20 engine. Vehicles with a manufacture date prior to 07/2013 should utilize a mechanical wastegate. Vehicles with a production date after 06/2013 should utilize an electronic wastegate. Only a visual identification is 100% accurate however. Please consult the wastegate identification guide HERE to accurately identify what is on the vehicle.

Benefits of the DINANTRONICS Stage 1 Performance Tuner for BMW N20 Engines:

• +46 HP @ 5500 RPM, +44 lb/ft @ 3500 RPM
• Won't void or negate your warranty
• Emissions legal in all 50 states
• Plug & play installation in two hours or less
• Quick, easy, and discrete installation

VEHICLE FITMENT

• 7/2013+ F30 BMW 328i 328i X-Drive - Sedan
• 7/2013+ F31 BMW 328i X-Drive - Touring Wagon
• 7/2013+ F32 BMW 428i 428i X-Drive - Coupe
• 7/2013+ F33 BMW 428i 428i X-Drive - Convertible
• 7/2013+ F34 BMW 328i 328i X-Drive - Gran Turismo
• 7/2013+ F36 BMW 428i 428i X-Drive - GranCoupe/ZCP
• 7/2013+ E84 BMW X1 sDrive28i X1 xDrive28i
• 7/2013+ F25 BMW X3 28i sDrive X3 28i xDrive
• 7/2013+ E89 BMW Z4 28i sDrive