RockJock 2021+ Bronco Rear Axle Johnny Joint 2 1/2in Narrow Weld-On 70mm x 16mm Ball

RockJock 2021+ Bronco Rear Axle Johnny Joint 2 1/2in Narrow Weld-On 70mm x 16mm BallRockJocks narrow style weld on Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high density urethane bushings that encase the inner ball. The heat treated center balls are cross drilled for thru bolt lubrication and the joint internals are retained

RockJocks narrow style weld-on Johnny Joints for fabricators and suspension system builders offer up to 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane bushings that encase the inner ball. The heat treated center balls are cross-drilled for thru-bolt lubrication and the joint internals are retained with 2 heavy duty, heat treated side washers and a snap ring. The 2 1/2 in. narrow style outer shell is weldable CNC machined DOM tubing that is fitted with a zerk fitting for greasing. This specific joints 70mm mounting width ball with a 16mm thru bolt hole is designed to fit the axle side of the 2021 and up Broncos rear control arms.