SKU: 51527278285

L2000® DXT PCB/Chloride Reagents

Sale price$153.00 Regular price$170.00
Save 10%

Pay in installments of $42.50 with ShopPay, AfterPay and Klarna

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Aug 8 - Aug 13

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

L2000® DXT PCB/Chloride ReagentsL2000 Reagents for On Site PCB Testing of Transformer Oil The Oil Reagent packs for use with the L2000DX or DXT analyzer include everything needed for PCB screening of transformer oil and are available by packs of 40 and bulk packs of 200. Preparing an oil sample for analysis is simple and takes less than 5 minutes. The L2000 test method involves reacting an oil sample with a sodium reagent to strip the covalently bonded chlorine from the PCB molecule

L2000 Reagents for On-Site PCB Testing of Transformer Oil

The Oil Reagent packs for use with the L2000DX or DXT analyzer include everything needed for PCB screening of transformer oil and are available by packs of 40 and bulk packs of 200.  

Preparing an oil sample for analysis is simple and takes less than 5 minutes.  The L2000 test method involves reacting an oil sample with a sodium reagent to strip the covalently bonded chlorine from the PCB molecule converting it to inorganic chloride.  The resulting chloride is then detected and quantified using a chloride ion specific electrode.   The L2000DX or DXT analyzer then mathematically converts the chloride reading to the equivalent concentration of the target analyte based on the percent chlorine associated with the analyte.  Conversion programs are available for the most common Aroclors and Askarel A.  Custom conversion programs can be built for less common analyte(s) not included on the L2000DX or DXT menu, instructions are included in the user's manual.

The usable result range is (MDL) 3 ppm - 2000 ppm.  Results for the L2000DXT are displayed on the 7" LCD touch screen and are stored in the internal memory.  Results may also be saved to an external flash drive for easy uploading to an Excel program to make later recall and reporting quick and easy.  

NOTE:  This screening method is for DIELECTRIC FLUID (transformer oil) ONLY.  It cannot be used to determine PCB contamination of any other type of oil (i.e. used motor oil or other lubricants/industrial oils).  Laboratory analysis is the only option for PCB testing of lubricating/industrial oils. 

L2000 Reagents for On-Site Analysis of Soil for PCB/Chlorinated Organics

U.S. EPA SW-846 METHOD 9078

The L2000DXT PCB/organic chlorine analyzer is a field portable instrument that can quantify chlorinated compounds in *all types of soil. Soils contaminated with PCBs, chlorinated solvents, or chlorinated pesticides/herbicides can be tested on-site in just 10 minutes. Screening with the L2000DXT system can greatly reduce the number of samples requiring expensive, time intensive laboratory analysis allowing for faster decision making in the field regarding delineation, excavation, remediation.

Collected soil samples are extracted and reacted with a sodium reagent to strip the covalently bonded chlorine from the analyte(s) converting it to inorganic chloride.  The resulting chloride is then detected and quantified using a chloride ion specific electrode.  The L2000DXT then mathematically converts the chloride reading to the equivalent concentration  of the target analyte based on the percent chlorine associated with the analyte.  Note:  Inorganic chloride, e.g. road salt, will not interfere with the test.  Conversion programs are available for all major Aroclors and most common chlorinated solvents and pesticides.  Custom conversion programs can be built for less common analyte(s) not included on the L2000DX menu, instructions are included in the user manual.

The usable result range for the L2000DXT is (MDL) 3 ppm - 2000 ppm.  Results are displayed on a 7" LCD touch screen and are stored in the internal memory.  Results may also be saved to an external flash drive for easy uploading to an Excel program to make later recall and reporting quick and easy.  

 *Some soils, such as wet clays, can pose an extraction problem. For information on dealing with difficult to solvate soils, please go to L2000 Two-Step Soil Reagents.

Note:  The L2000 soil reagents may used with both the L2000DX and L2000DXT analyzers.

L2000 Reagents for use with L2000DX or DXT Analyzer System for Quantifying Chlorinated Organics in Groundwater

The L2000DXT PCB/organic chlorine analyzer system is an efficient, accurate tool for determining chlorinated organic compound contamination in groundwater. The L2000DXT is very easy to use with a variety of programmed methods specifically designed for water testing. Extraction efficiencies and conversion factors for over a dozen chlorinated compounds have been programmed into the instrument for accurate in-field results. In addition to the available programmed methods, customized methods can be designed by the user incorporating characteristics specific for site location and analyte.  

Field trial and laboratory validation studies show that water analysis using the L2000 test method compares very well with expensive laboratory methods. This data shows that the L2000 method can accurately determine the true contaminate concentration in two ranges. The test method offers two result options: Low range: (*MDL) 20 ppb to 5 ppm (requires a 1 liter sample), and high range (*MDL) 3 ppm to 2000 ppm. Inorganic chloride will not interfere with the test. 

Results for the L2000DXT are displayed on a 7" LCD touch screen and are stored in the internal memory.  Results may also be saved to an external flash drive for easy uploading to an Excel program to make later recall and reporting quick and easy.  

*Note:  MDL & MQL are analyte dependent.

PCB Test Reagents for Surface Wipe Samples for Use with the L2000DX or DXT Analyzer

The L2000DXT Analyzer System offers environmental testing versatility including PCB testing of surface wipe samples.  If waiting for laboratory results for surface wipes is not an option, the L2000DXT system can provide on-the-spot screening in just a few easy steps with results in less than 10 minutes.  This test method requires wiping an area 1000 cm2; results are provided in µg PCB/100 cm2 .  Results are not specific to any Aroclor, they are determined by extracting and quantifying the chlorine associated with PCBs.  The amount of chlorine is directly proportional to the amount of PCB. 

Collected wipe samples are extracted and reacted with a sodium reagent to strip the covalently bonded chlorine from the analyte(s) converting it to inorganic chloride.  The resulting chloride is then detected and quantified using a chloride ion specific electrode.  The L2000DXT then mathematically converts the chloride reading to the equivalent concentration  of the target analyte based on the percent chlorine associated with the analyte. Conversion programs are available for all major Aroclors and most common chlorinated solvents and pesticides.  Custom conversion programs can be built for less common analyte(s) not included in the L2000DXT menu, instructions are included in the user manual.

The usable result range is (MDL) 3 µg 100cm2 to 2000 µg 100cm2.  Results for the L2000DXT are displayed on the 7" LCD touch screen and are stored in the internal memory.  Results may also be saved to an external flash drive for easy uploading to an Excel program to make later recall and reporting quick and easy.  

In addition to test reagents, each wipe reagent pack include everything needed to collect 20 wipe samples; gauze pads, individually sealed glass ampules containing chromatographic hexane, sample vials, as well as PCB rated gloves and plastic goggles for safety. 

Note:  The L2000 wipe reagents may be used with both the L2000DX and L2000DXT analyzers.

L2000 Two-Step Soil Extraction Recommended for Hard to Extract Wet Clays

Soils, such as wet clays, pose an extraction problem with most extraction solvents on the market today. If the extraction solvent cannot solvate the soil and remove the contaminant efficiently, an underestimation of the contaminant will occur. Dexsil has developed a "Two-Step Extraction Method" that allows difficult soils to be solvated efficiently for accurate and reliable results. An on-site study using the two-step method to extract PCB from lacustrine clay demonstrated that when compared to a soxhlet extraction method, the 2-step method had an extraction efficiency of >78%. 

Collected soil samples are extracted and reacted with a sodium reagent to strip the covalently bonded chlorine from the analyte(s) converting it to inorganic chloride.  The resulting chloride is then detected and quantified using a chloride ion specific electrode.  The L2000DXT then mathematically converts the chloride reading to the equivalent concentration  of the target analyte based on the percent chlorine associated with the analyte.  Note:  Inorganic chloride, e.g. road salt, will not interfere with the test.  Conversion programs are available for all major Aroclors and most common chlorinated solvents and pesticides.  Custom conversion programs can be built for less common analyte(s) not included on the L2000DXT menu, instructions are included in the user manual.

The usable result range is (MDL) 3 ppm - 2000 ppm.  Results for the L2000DXT are displayed on a 7" LCD touch screen and are stored in the internal memory.  Results may also be saved to an external flash drive for easy uploading to an Excel program to make later recall and reporting quick and easy.  

 

INSTRUCTIONS

 

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 51527278285

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.7 ★★★★★
Based on 24 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
T
Verified Purchase
Trish
Boise, US
★★★★★ 5
Had to order more!
Color: Ivory/Rose Gold, Size: Pack of 50, Color: Ivory/Rose Gold, Size: Pack of 50
Such great hangers that save space and provide true non-slipping of clothing. They came in handy as I got rid of ye old plastic hangers. My closet looks so much more organized and a little bit more spacious. They are lightweight and hold up very well. I did notice some hangers had "peeling" to them but I honestly didn't care since they are doing the work they are intended for. These are pretty versatile as I even have winter jackes hanging from them. The price is aslo very good in my opinion and on par with one of the big box companies my mom got hers from, but I like the fact that these come in various colors and finishes. The quantity options are also a blessing as I needed more than I initially opted for. Needless to say I liked them so much I had to order more. I also loved how well and neatly packed they came. 10/10 recommend!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
A
Verified Purchase
Amazon Customer
Lexington, US
★★★★★ 5
Slim, sturdy, no slipping
Color: Black, Size: Pack of 100
I love these hangers! The velvet covering on them keeps clothes put, even silky items don’t fall off. I like that they have a small dip on both sides to help keep spaghetti straps even more securely in place Because they aren’t bulky you can utilize your closet space better. The metal hanger at the top also swivels which I find useful when hanging my clothes to steam. Great quality and quantity for the price!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 14, 2026
A
Verified Purchase
Amazon Customer
Battle Creek, US
★★★★★ 5
Arrived quickly, great price & item as described!
Color: Ivory/Beige, Size: Pack of 30, Color: Ivory/Beige, Size: Pack of 30
Feel sturdy, good grip bought 2 packs to organize my clothes l, Skinny Metal and hangers to help my clothes fit better in my smaller closet. Already assembled with easy to unwrap cardboard. Versatile hangers, that will make my life easier!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 24, 2026
D
Verified Purchase
DEBORAH C. JONES
New York, US
★★★★★ 4
Nice quality
Color: Gray/Silver, Size: Pack of 50
Best price for the quantity
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 30, 2026
S
Verified Purchase
Simplified
Battle Creek, US
★★★★★ 5
Space-Saving, Stylish, and Surprisingly Strong Closet Upgrade
Color: Black, Size: Pack of 100
I’ve been using these Amazon Basics slim velvet hangers, and they completely changed how organized my closet feels. The biggest difference is how much space they save. Because they’re so thin compared to regular plastic hangers, I was able to fit a lot more clothes in the same closet without it feeling crowded. The velvet coating is also a great feature. Clothes actually stay in place and don’t slip off, even lighter fabrics like tank tops or blouses. That alone makes getting dressed in the morning easier because I’m not constantly picking things up off the floor. They feel sturdy too. Even though they are slim, they hold heavier items like jackets and sweaters without bending or breaking. The shape helps keep clothes looking neat and prevents those annoying shoulder bumps that some hangers cause. I also like the clean black and silver look, it gives the closet a more uniform and organized appearance, which makes everything feel more put together. Overall, these hangers are a simple but very effective upgrade for any closet. They save space, keep clothes in place, and make everything look more organized without much effort.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 21, 2026

recommand products