Kidde Slick 2x 2SFW Optical Smoke & 1x 3SFW Heat Alarm Kit Mains Powered with Alkaline Battery Back-Up

Kidde Slick 2x 2SFW Optical Smoke & 1x 3SFW Heat Alarm Kit Mains Powered with Alkaline Battery Back-UpKidde Slick 2x 2SFW Optical Smoke & 1x 3SFW Heat Alarm Kit Mains Powered with Alkaline Battery Back Up FULLY COMPLY WITH THE NEW 2022 SCOTTISH & WELSH REGULATIONS 2x Mains Powered Optical Smoke Alarm (2SFW): Mains Optical Smoke Alarm Features: Mains powered Optical smoke alarm from the Slick range of fast fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms. Optional wireless capability using Wireless Alarm Base (RF

Kidde Slick 2x 2SFW Optical Smoke & 1x 3SFW Heat Alarm Kit Mains Powered with Alkaline Battery Back-Up

FULLY COMPLY WITH THE NEW 2022 SCOTTISH & WELSH REGULATIONS

2x Mains Powered Optical Smoke Alarm (2SFW):

Mains Optical Smoke Alarm Features:

Mains-powered Optical smoke alarm from the ‘Slick’ range of fast-fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms.
Optional wireless capability using Wireless Alarm Base (RF-SFTP) for wire-free interconnection.
The ‘Slick’ range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D, BS5839, Part 6).

• Unique fast-fit system with separate base plate, for ease of fitting and maintenance
• Integral, double-decker screwless terminal block for fast, push-fit connection
• Auto reset after activation
• Separate Test and Hush buttons to test and temporarily silence nuisance alarms
• Alkaline back-up battery provides continuous operation in the event of mains failure
• Interconnectable with other Kidde mains smoke and heat alarms and Kidde mains CO alarms using ‘Smart Interconnect’ technology
• Tamper-resistant locking device – prevents unauthorised removal without the use of a tool
• Wireless capability – use with optional Wireless Alarm Base (RF-SFTP) for RF interlink function
• Deep Base – allows easier wiring

Mains Optical Smoke Alarm Specification:

• Model 2SFW
• Power Supply 230V mains
• Temperature Range 0ºC to +40ºC
• Humidity Range Up to 93% Relative Humidity (RH) non-condensing
• Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing
• Alarm Dimensions 135 x 135 x 60mm (including ‘Slick’ mounting base)
• Alarm Weight 280g
• Warranty 10 years
• Approvals BSI certified to BS EN14604:2005
• CE tested and certified
• Associated Standard BS 5839 Part 6 Grade D
• Sensor Optical chamber with insect-resistant width slot entry inlet portals
• Chamber Size 41mm outside diameter x 16mm approximate depth (external)
• Sensitivity Complies with BS EN14604:2005
• Detection Band infrared light wavelength
• Button Test Simulates the effect of smoke within the sensing chamber, checks electronics and sounder
• Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected
• Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
• Power Consumption Maximum 80mA
• Battery Back-up User-replaceable alkaline 9V battery (MX1604)
• Battery Monitoring Battery is monitored and unit emits a single chirp every 40 seconds if a fault is present
• Low Battery Warning 30-day low battery indicator
• Power-on Indicator Continuous green LED
• Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)
• Sound Output 85dB (A) minimum at 3 metres
• Alarm Frequency 3.2 kHz typical
• Alarm Status Red LED flashes rapidly, typically once every 2/3 seconds = unit sensing a fire event
• Red LED flashes once every 10 seconds = unit in hush condition, auto reset after 7 minutes
• Red LED flashes once every 35 seconds = normal quiescent operation
• Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART® interconnect system with optional control (see below)
• Up to 15 units can be wireless interconnected using appropriate Wireless Base RF-SFTP
• Optional Controls Wireless Base Remote Test and Hush Unit (KN-RTH-RF) when used with Wireless Base
• Fixing ‘Slick’ mounting deep base as supplied
• Base Cable Connect. Screwless Terminal Block with slot release feature for conductors

1x Mains Powered Heat Alarm (3SFW):

Mains Heat Alarm Features:

Mains powered heat alarm from the ‘Slick’ range of fast-fit alarms that can be interconnected with up to 23 other Kidde and Firex mains alarms.
Optional wireless capability using Wireless Alarm Base (RF-SFTP) for wire-free interconnection.
The ‘Slick’ range requires installation by a professionally qualified electrician and complies with UK Building Regulations for new housing and associated standards (Grade D, BS5839, Part 6).

• Unique fast-fit system with separate base plate, for ease of fitting and maintenance
• Integral, double-decker screwless terminal block for fast, push-fit connection
• Auto reset after activation with latching LED allowing the initiating alarm to be identified
• Separate Test and Hush buttons to test and temporarily silence nuisance alarms
• Alkaline back-up battery provides continuous operation in the event of mains failure
• Interconnectable with other Kidde mains smoke and heat alarms and Kidde mains CO alarmsusing ‘Smart Interconnect’ technology
• Tamper-resistant locking device – prevents unauthorised removal without the use of a tool
• Wireless capability – use with optional Wireless Alarm Base (RF-SFTP) for RF interlink function
• Deep Base – allows easier wiring

Mains Heat Alarm Specification:

• Model 3SFW
• Power Supply 230V mains
• Temperature Range 0ºC to +40ºC
• Humidity Range Up to 93% Relative Humidity (RH) non-condensing
• Storage and Transport -20ºC to +60ºC and 5–95% relative humidity (RH) non-condensing
• Alarm Dimensions 135 x 135 x 70mm (including ‘Slick’ mounting base)
• Alarm Weight 274g
• Warranty 10 years
• Approvals BSI certified to BS5446 Part 2:2003
• CE tested and certified
• Associated Standard BS 5839 Part 6 Grade D
• Sensor Thermistor (Thermal resistor) within detection unit
• Sensitivity Complies with BS 5446 Part2:2003, as a Class A2 device, alarms between 54ºC and 70ºC
• Button Test Simulates the effect of heat at the sensor, checks electronics and sounder
• Automatic Self-test Circuitry is tested every 40 seconds and unit beeps if fault is detected
• Supply Voltage 230V AC, 50 Hz (nominal UK voltage)
• Power Consumption Maximum 80mA
• Battery Back-up User-replaceable alkaline 9V battery (MX1604)
• Battery Monitoring Battery is monitored and unit emits a single chirp every 40 seconds if a fault is present
• Low Battery Warning 30-day low battery indicator
• Power-on Indicator Continuous green LED
• Alarm Sounder Electronic piezo-electric sounder (T3 pattern sound - three pulses - space - three pulses)
• Sound Output 85dB (A) minimum at 3 metres
• Alarm Frequency 3.2 kHz typical
• Alarm Status Red LED flashes rapidly, typically once every 2/3 seconds = unit sensing a fire event
• Red LED double flashes every 30 seconds = unit is triggering unit (press test button to unlatch)
• Red LED flashes once every ten seconds = in hush condition (auto-reset after 7 minutes)
• Red LED flashes once every 35 seconds = normal quiescent operation
• Interconnection Up to 24 units (smoke, heat and CO) can be hardwire interconnected using SMART® interconnect system with optional control (see below)
• Up to 15 units can be wireless interconnected using appropriate Wireless Base RF-SFTP
• Optional Controls Wireless Base Remote Test and Hush Unit (KN-RTH-RF) when used with Wireless Base
• Fixing ‘Slick’ mounting deep base as supplied
• Base Cable Connect. Screwless Terminal Block with slot release feature for conductor

Please note: Alarms are sold individually.

Data Sheet:

Instruction Manual: