West System Epoxy Pack Fast Hardner 1.2 1.2Kg (West Pack A)

West System Epoxy Pack Fast Hardner 1.2 1.2Kg (West Pack A)105 205 Epoxy is used for general coating and bonding applications at lower temperatures and to produce a rapid cure that develops its physical properties quickly at room temperature. 105 205 Epoxy forms a high strength, moisture resistant solid with excellent bonding and barrier coating properties. It will wet out and bond to wood fibre, fibreglass, reinforcing fabrics, foam and other composite materials, plus a variety of metals. 105 205 Epoxy can

105/205 Epoxy is used for general coating and bonding applications at lower
temperatures and to produce a rapid cure that develops its physical properties quickly at
room temperature.
105/205 Epoxy forms a high-strength, moisture-resistant solid with excellent bonding and
barrier coating properties. It will wet out and bond to wood fibre, fibreglass, reinforcing
fabrics, foam and other composite materials, plus a variety of metals.
105/205 Epoxy can be thickened with WEST SYSTEM fillers to bridge gaps and fill voids.
Once cured it can be sanded and shaped. With roller application, it has excellent thin-film
characteristics, allowing it to flow out and self-level without “fish-eyeing.” Multiple coats
of 105/205 Epoxy create a superior moisture barrier and a tough, stable base for paints
and varnishes. It is formulated without volatile solvents resulting in a very low VOC
content. It has a relatively high flash point, no strong solvent odour and does not shrink
after curing. It is not intended for clear coating natural finished wood. 

WEST SYSTEM 105-205 Pot Life at 25°C = 10 to 15 minutes, Cure to Solid State at 21°C = 5 to 7 hours Cure to Maximum Strength at 21°C = 5 to 7 days. WEST SYSTEM 105-205 minimum Recommended Working Temperature = 5°C Pumps Required = (5:1 ratio) 301, 306 or 309