Pay in installments of $31.24 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Aug 2 - Aug 7
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
Traxxas Mini Slash® Brushless 1/16 4WD RTR Short Course Truck (Yellow) w/TQ™ 2.4Ghz Radio, BatteryMODEL SPECS Model Name: Mini Slash 4X4 Model Type: Short course truck Top Speed: 30+ Skill Level: 1 Scale: Mini Length: 16. 06 inches (408 mm) Width: 8. 46 inches (215 mm) Height: 5. 63 inches (143 mm) Weight: 3. 62 pounds (1. 64 kg) Track: 7. 28 inches (185 mm) Wheelbase: 9. 25 inches (235 mm) Ground Clearance: 1. 06 inches (27 mm) Drivetrain: Shaft driven 4WD Transmission: Direct drive Differential Type: Planetary, steel gear Gear Pitch: 32 Servo:
MODEL SPECS
| Model Name: | Mini Slash 4X4 |
|---|---|
| Model Type: | Short course truck |
| Top Speed: | 30+ |
| Skill Level: | 1 |
| Scale: | Mini |
| Length: | 16.06 inches (408 mm) |
| Width: | 8.46 inches (215 mm) |
| Height: | 5.63 inches (143 mm) |
| Weight: | 3.62 pounds (1.64 kg) |
| Track: | 7.28 inches (185 mm) |
MOTOR SPECS
| Motor Name: | BL-2s 3300 Kv |
|---|---|
| Motor Type: | Sensorless brushless |
| Motor Weight: | 7.51 ounces (213 g) |
| Motor Length: | 3.15 inches (80 mm) |
| Motor Diameter: | 1.42 inches (36 mm) |
| Motor Shaft Size: | 3 mm |
| Motor Connector Type: | Traxxas Quick Connect Motor Plug |
ESC SPECS
| ESC Name: | BL-2s Electronic Speed Control |
|---|---|
| ESC Type: | Brushless |
| ESC Case Size: | 1.53″ (39 mm) x 2.31″ (59 mm) x 1.21″ (31 mm) |
| ESC Weight: | 3.07 ounces (87 g) |
| BEC Voltage: | 6 volts |
| Thermal Protection: | Two-stage thermal shutdown |
| Ports: | Auxiliary fan |
| Battery Connector: | Traxxas High-Current Connector |
- 30+ mph Top Speed
- BL-2s™ Waterproof Electronic Speed Control
- Heat sink accepts accessory cooling fan (3340)
- Three programmable drive profiles
- Sport Mode - forward / brake / reverse
- Race Mode - forward / brake
- Training Mode™ - 50% forward / brake / 50% reverse
- Traxxas EZ-Set® one-button setup
- Built-in two-stage low-voltage detection
- BL-2s™ Brushless Motor
- Integrated cooling fan
- Low-maintenance design
- Efficient ball bearings
- 3300 Kv
- Battery and Charger Included
- High-capacity 2-cell LiPo battery
- 7.4 volts
- 3500 mAh for extended run time
- 2-amp USB-C charger
- iD® technology for faster, safer charging
- TQ™ 2.4 GHz Transmitter
- Full-size 2-channel transmitter
- All-day comfort with precise long-range control
- Clipless Body
- Realistic injection-molded interior
- Driver figure and replica netting
- Integrated cooling channels for ESC and motor
- Quick and easy installation and removal
- Nerf bar channels for side body support
- Reinforced for extra protection against tearing
- 1/10 Scale 4X4 Driveline
- Full-time shaft-driven 4-wheel drive
- 1/10 scale extreme-duty telescoping driveshafts
- Direct drive (no transmission)
- Fixed gear mesh system
- Large 32-pitch gears
- Sealed planetary steel-gear differentials
- Fixed gear mesh system
- New Extended Mini Chassis
- Modular chassis with interlocking front and rear bulkheads
- Longer 235 mm wheelbase
- Absorbs and distributes impact energy
- Easy to service and access components
- Driveline is sealed in the chassis to keep out dirt
- Easy Battery Access
- Battery is protected deep in the chassis
- Modular strap with removeable spacer for tall batteries
- Battery hold-down pivots for easy access
- More secure than conventional retention systems
- Steering
- 1/10 scale 2056 waterproof high-torque servo
- Heavy-duty double-shear bellcranks
- Cam-operated servo saver
- Suspension
- Heavy duty, double-shear suspension arms
- Dual wishbone design
- Extra tough outer suspension components
- Oil-Filled Ultra Shocks™
- Same construction as 1/10 shocks
- Large oil capacity
- Easy to tune
- Bumpers and Skid Plates
- Full-width front bumper
- High-angle front skid plate
- Rugged interlocking skid plates
- Smooth undertray eliminates snags
- Integrated nerf bars for side impact resistance
- Wheels and Tires
- Licensed BFGoodrich® Mud Terrain™ T/A® KM3 tires
- Internal ribbed design with no foam inserts
- High-traction rubber compound
- Replica Maxx Slash wheels
- Hex Hardware with Rust-Resistant Black Oxide Coating
- Sealed Ball Bearings
MODEL MODEL 108164-1: Mini Slash 4X4: 4WD short course truck, fully assembled, Ready-To-Race®, with TQ™ 2.4 GHz radio system, BL-2s™ brushless power system, and clipless painted body. Includes 2-cell LiPo battery and 2-amp USB-C charger.
What’s In The Box:
- Mini Slash 4X4 Ready-To-Race short course truck
- BL-2s Brushless Power System
- 3500 mAh 2-cell LiPo battery
- 2-amp USB-C charger
- Quick Start Guide
- TQ 2.4 GHz radio system
- High quality maintenance tools
What You’ll Need:
- AA Alkaline Batteries
Four AA alkaline batteries for the transmitter
- Charging Accessories
Power adapter 2912 and power cable 2916 recommended for peak charging performance
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.7 ★★★★★
Based on 5 reviews
Sort
Product Reviews
★★★★★ 5
Great Purchase!
Color: White, Style: Wall Cabinet
Great quality. Easy to put together. Looks great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 4, 2026
★★★★★ 4
Mounting process could have been easier but still a beautiful cabinet
Color: White, Style: Wall Cabinet, Color: White, Style: Wall Cabinet
Beautiful cabinet seems to be good quality I just keep admiring something so beautiful about the white. The extra hardware is thoughtful.
With some master skills I was able to get it mounted perfect. It was not a breeze but nonetheless I always find a way.
I found the best way to mount this was to hold it against the wall and follow the pre-drilled holes at the bottom to drill the holes into the wall that wasnt that hard
But for the top anchor/screws, the cabinet did not have pre-drilled holes and I was not about to guess !! So I used alien tape to tape the top wood bar to the unit as shown in pic then took the cabinet lined up the bottom holes while holding the cabinet up then I drilled holes through the unit with a small bit just to get the whole going then took it back down then followed the same holes with a bigger bit and it worked for me. It hung level.
It was crazy that the pre-holes were not 16” apart when they could have been. I added extra screws to be able to mount them to a stud I didn’t feel comfortable with it not being mounted to a stud. The screws I had were too long gonna have to get some shorter screws. But it’s up & looks so nice
DO NOT USE 11/32 bit. Don’t even use 5/16. I use 1/4 and kinda ran the drill in a circle to widen the whole and it was the perfect tight fit
All in all I do love the cabinet. Just feel the mounting process could have been instructed more conveniently
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 16, 2026
★★★★★ 5
Love it !!!!
Color: White, Style: Wall Cabinet, Color: White, Style: Wall Cabinet
I absolutely love this cabinet. It’s super well-made easy to put together and the space is great. I’ve already received some compliments. Thought it would guests. Come to my home. Just look at how nice it pairs with my bathroom. The handles are sturdy. There’s also a nice tag inside with the company’s name. If you’re looking for a bathroom cabinet, highly recommended this one is well worth it. Love it!!!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on February 19, 2026
★★★★★ 5
Excellent Cabinet for someone good at mounting a cabinet
Color: White, Style: Wall Cabinet
The cabinet arrived very well packaged with an instruction booklet, hardware, and an Allen wrench. The booklet says you will just need a Phillips screwdriver, but you will also need a drill with an appropriate bit (more on the bit later) to mount the cabinet on the wall.
Assembling the cabinet was simplified by how well the cabinet pieces and hardware were labeled and referenced in the instruction booklet. The holes in all the cabinet parts lined up nicely.
The doors swing on spring loaded pivots. They are not adjustable, but work well and are probably much less expensive than European style hinges. I was concerned that the doors would not line up, but they look fine.
The Magnetic Latch also works well, but the little piece of wood that it mounts on fell off during assembly so I glued it back in place. This was the only problem I had assembling the cabinet. I let the glue dry overnight and mounted the cabinet the next day.
The wood support plate they ship with the cabinet is a great way to hang a cabinet, however I did have some problems using the supplied anchors. I recommend having some other anchors and screws available in case you have similar issues.
Skip this paragraph if you do not care about the details: I mounted the cabinet on drywall. The instructions said to drill 11/32” holes for the supplied plastic wall anchors. I did not have an 11/32” bit so I used a 5/16” bit. Even though my holes were 1/32” smaller than specified, the anchors slid into the drywall very easily without having to tap them. I recommend using a 5/16” bit or even a 9/32” bit instead of the 11/32” they specify. Next I mounted the support plate with the supplied screws, but I could not get the screws tight enough to hold the plate securely in place. It felt like the screws were too small in diameter so I used some slightly larger screws. That worked fine for one of the screws holding the plate and the two lower screws, but the second screw through the plate would not bite and hold the plate firmly. Fortunately I had one HILTI 3/16” hollow wall metal anchor left over from a previous project and was able to get the plate very solidly attached to the wall.
My wife is very pleased with the cabinet. I did have some trouble with the latch and the install so I was tempted to knock off a star, but I think this is a 5-Star item considering the low cost and how well the the cabinet parts aligned with each other.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 20, 2025
★★★★★ 5
Love and amazing for the price!
Color: White, Style: Wall Cabinet, Color: White, Style: Wall Cabinet
Perfect! I'm a renter and didn't want to spend an arm and a leg on something that might not work in the next place so this looked like it would be a good fit. I really wasn't expecting much for the price point but I was VERY pleasantly surprised. It's a great piece.
I love assembling things (I'm an Ikea pro) but this had literally the easiest and most explicit instructions I have ever seen. Every piece is clearly labeled. The hardware comes in a bubble pack, again clearly labeled. Rhe instructions are very clear.
Another thing I appreciated was the mounting mechanism which is a French cleat. It is much easier to level and screw in a cleat than to recruit help and try to hold a cabinet in place and try screwing it in. I'm a fat middle age woman and I had no problem mounting it by myself.
Notice there are no screws visible on the outside. That was a huge selling point for me.
Only con is that for the quality of everything else, the shelves are on the thin side, placing anything substantial would definitely make them bow.
Background is a scrap of peel-and-stick.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 28, 2026
recommand products
Greddinton Bakers Rack Base
343.49
Grumpy Mule High and Mighty Espresso Blend Ground Coffee with notes of Cocoa and Roast Hazelnut 200g (Pack of 6 - Total 1.2kg)
53.92
Premium Battery for Gn Netcom 9120, Netcom 9125 3.7V, 340mAh - 1.26Wh
15.95
Premium Battery for Panasonic Rp-wfg20, Rp-wfg20h, Rp-wfg20e 3.7V, 600mAh - 2.22Wh
15.95
Hendridge Wall Art (Set of 3)
188.97