Eufy E340 5.5° Vertical Wedge — Up/Down Tilt Bracket

Eufy E340 5.5° Vertical Wedge — Up/Down Tilt BracketOverview Fine tune your camera angle on angled siding or high mounting locations with this 5. 5 vertical wedge by Hidden River Lab designed for the eufy Video Doorbell E340. The E340 is a dual camera doorbell with 2K video and can be used wired or battery powered, and this wedge is built to match that footprint for a clean, stable install. 5. 5 vertical tilt helps compensate siding incline and improve framing. Compatibility Designed for: eufy Video

Overview

Fine-tune your camera angle on angled siding or high mounting locations with this 5.5° vertical wedge by Hidden River Lab designed for the eufy Video Doorbell E340. The E340 is a dual-camera doorbell with 2K video and can be used wired or battery powered, and this wedge is built to match that footprint for a clean, stable install.

5.5° vertical tilt helps compensate siding incline and improve framing.

Compatibility

✔︎ Designed for:

• eufy Video Doorbell E340 (dual camera, 2K)

✔︎ Angle: 5.5° vertical tilt (up or down depending on orientation)

✔︎ Use case: Siding incline compensation; flat walls when a small vertical tilt is needed

✔︎ Orientation: Universal — flip to tilt up or down

✖︎ Not compatible with:

• Other eufy doorbell models not listed above

Not sure which model you have? Send us a photo of your doorbell and mounting area — we’ll confirm fitment.

What’s Included

▪︎ 1 × 5.5° vertical wedge mount

▪︎ All required mounting screws (included)

✖︎ Doorbell and OEM backplate are not included. Photos may show example setups for illustration.

Fit & Measurements

▪︎ Designed to provide a consistent 5.5° vertical tilt for the E340 footprint

▪︎ Flip orientation to tilt down or up depending on your mounting height and desired framing

→ Please confirm you have adequate flat mounting area on your siding/trim before purchase.

Why You’d Use This Wedge

▪︎ Compensates siding incline: Helps correct the natural tilt of many siding profiles

▪︎ Better camera framing: Useful if the doorbell sits high and needs a slight downward aim

▪︎ Flexible orientation: Flip to tilt down or up depending on your install

▪︎ Clean, stable mount: Purpose-built fit for the E340 body

Installation Notes

Basic tools required (e.g., screwdriver).

▪︎ Place the wedge between the mounting surface and the doorbell mounting setup.

▪︎ Choose the wedge orientation that gives the desired up/down tilt.

▪︎ Install using the included screws and weather-seal as appropriate for your environment.

If you’re unsure about fitment or need a different angle, message us with photos — we’ll help quickly.

Materials & Finish

♺ 3D-printed durable plastic for everyday outdoor use.

▪︎ New condition. Minor internal artifacts may be visible due to additive manufacturing (3D printing). External faces are designed to present cleanly once installed.

Color & Image Note

Actual color may vary slightly due to lighting and display calibration. Photos may show example setups; eufy components shown are not included unless stated above.

Brand & Affiliation Disclaimer

This is an aftermarket product made by Hidden River Lab. It is not affiliated with, sponsored by, or endorsed by eufy. eufy® is a trademark of its respective owner. Brand names are used solely to indicate compatibility.

Intellectual Property Notice

The design, images, and listing text are intellectual property of Hidden River Lab. Purchase does not grant any license to copy, reproduce, manufacture, reverse-engineer, or commercially exploit the design in whole or in part.

Support

Not sure if your doorbell is the eufy Video Doorbell E340 or whether 5.5° is enough tilt? Message us with photos of your mounting area — we’ll help quickly.